• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.66-71
• /
• 2008

The data of the deformation and the stress according to time are studied at upper model of press and lower model of the blanking plate applied by press with the width, length and height of 0.4 m and 0.6 m respectively. The press is pushing downward on the plate fixed at the lower floor. These data are compared and investigated through this study. By using these results, there is the maximum deformation at 4 corners in the lower plate model of aluminium alloy fixed at lower floor. This deformation incase of elapsed time of 0.6 second becomes 4 times as much as in case of elapsed time of 0.2 second. The quantity of deformation at the lower plate model becomes more than at the upper press model to the extent of 10%. At the lower plate model of aluminium alloy, there is the maximum Von-Mises equivalent stress at 4 corners and both sides of middle area on the lower plate model of aluminium alloy. This stress in case of elapsed time of 0.6 second becomes 6 times as much as in case of elapsed time of 0.2 second. The Von-Mises equivalent stress of lower plate model becomes 2 times as much as that of upper press mode.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.185-189
• /
• 2009

Recently, ultra high strength products can be manufactured by the hot press forming process of Boron steel in automotive and electronics industries. In order to get high strength, the hot press forming should be accompanied by quenching process inducing phase transformation. There are several types of the hot press forming processes according to the quenching method, water quenching and die quenching, etc. In the study, the process was numerically and physically simulated to compare the two types of quenching processes, and then the strength, hardness and dimensions of the products were compared with try-outs.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.89-99
• /
• 1993

In this research, important mechanical characteristics of Compliant Press-Fit Pin and PHT are studied through the analysis of deformation mechanisms of Press-Fit Pin and by elastic-plastic finite element method. The direct data for the optimal design of pin was obtained without interfere with the criterion on insertion force and retention force. Also, the insertion force and retention force of new type pin were measured by precision type tensile testing machine and it revealed good agreement with analytical results. In conclusion, it is believed that above results will contribute satisfactorily to the practical design of Press-Fit Pin.

• Transactions of Materials Processing
• /
• v.25 no.1
• /
• pp.29-35
• /
• 2016

In the current study, finite element analysis was conducted for the press hemming of automotive panels in order to predict various hemming defects such as roll-in and turn down. The analysis used the exact punch movement based on the cam location and considered the sealer between the inner and outer panels with an artificial contact thickness. The analysis results quantify the hemming defects especially at the flange edge in the matching region of the head lamp. A design of experiments along with the parameter study was used to obtain the optimum process parameters for minimizing hemming defects. The optimization process selects the intake angle, bending angle of the hemming punch, and the flange height of the outer panel. The optimum design process determines an appropriate tool angle and flange height to reduce the roll-in and turn-down as compared to the initial design.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.260-265
• /
• 2022

In this study, we establish hyper-elastic haptic feedback in a virtual environment using finite element analysis techniques and develop a Force Torque (FT) sensor utilization method for application in tele-operation environments. In general, regarding haptic feedback data, in a tele-operation environment, the user is provided with feedback according to the measured force data when the model is inserted through an FT sensor. Conversely, in a virtual environment, the press-fitting model can be expressed through the spring-damper system rather than an FT sensor to provide feedback. However, unlike rigid and the elastic bodies, the hyper-elastic body represented by a spring-damper system in a virtual environment is a simple impedance model using stiffness and damping coefficients; it is limited in terms of providing actual feedback. Thus, in this study, haptic feedback was implemented using the data obtained from POD-RBF analysis results during hyper-elastic press-fitting experiments. The haptic feedback mechanism developed in this study was verified by comparing the FT sensor feedback data measured and calculated through hyper-elastic press-fitting experiments with spring-damper feedback data. Subsequently, the POD-RBF analysis feedback was compared and evaluated against the feedback mechanism of each environment through the test subject, and the similarities between the POD-RBF analysis feedback and FT sensor data feedback were verified.

• Korean journal of communication and information
• /
• v.67
• /
• pp.7-34
• /
• 2014

This study analyzes the characteristics, implications, and problems of Social Network of Press Organizations from the Kim Dae-jung administration to the Lee Myung-bak administration in Korea. For analyzing these issues, this study attempts to investigate the traits of social network structure based on the density analysis, distribution character analysis and correspondence analysis in each and among regimes. To answer these questions, this study utilizes human relationship data which related to personal network aspects (place of birth, affiliated college) and expertise aspects (types of major field), and which data has been gathered from the biographical web-site of Press Organizations in Korea. The results showed that the membership format of each Press Organizations depends on the connection with political environment directly and indirectly. Especially, the network traits of Broadcasting Press Organizations stands out a place of birth aspect. This findings indicate that the broadcasting policy reality that the path of decision making is connected with the political environment is more effective.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.329-340
• /
• 2010

This paper aims to analyze the hyperlink between the portal sites and the press dot coms news and to grasp the features of news service on the online journalism. As a result of the analysis, the portal sites, in the number of news articles which the hyperlink service had been provided, were more than the press dot coms. But in the number of the hyperlinks in the news story which hyperlink service had been provided, the press dot coms were more than the portal sites. The contents that were hyperlinked to the news stories of online journalism were composed of a informative type and an advertising one. All contents that were hyperlinked to the news stories on portal site were informative. On the other hand, about 92% of the contents that were hyperlinked to the news stories on the press web sites were advertising. By means of this analysis, the features of news service on the online journalism could be grasped.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.821-822
• /
• 2013

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.368-368
• /
• 2007