• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.363-373
• /
• 2018

In recent years, parabens used as preservatives in cosmetics have become a problem of human safety. Therefore, in this study, we tried to evaluate the preservative efficacy of 1,3-butylene glycol, 1,2-hexanediol, and 1,2-pentanediol as a preservative system to replace parabens. 1,3-Butylene glycol was added to cosmetic creams at a concentration of between 5 and 25%. The preservative efficacy of 1,3-butylene glycol was determined using a M-3 challenge test, as recommended by the Personal Care Products Council (formally CTFA). The alkane diols, such as 1,2-hexanediol and 1,2-pentanediol, were assessed in a similar manner. An evaluation of the preservative efficacy of 1,3-butylene glycol revealed that it was effective against all tested microbial strains at a concentration of 25%. We also investigated the efficacy of combinations of 0.3% phenoxyethanol and 0.1% ethylhexylglycerin. Finally, we tested the alkane diols, including 1,2-hexanediol and 1,2-pentanediol, as an alternative to the preservative 0.3% phenoxyethanol. Both 1% 1,2-hexanediol and 1% 1,2-pentanediol demonstrated preservative efficacy. Taken together, our study demonstrated that the formulation of 25% 1,3-butylene glycol and 0.1% ethylhexylglycerin, 1% 1,2-hexanediol, and 1% 1,2-pentanediol had the best preservative efficacy of the compositions tested. Thus, this study suggests that the formulation is a possibility of substituting parabens preservatives, which has been used in cosmetics and has become a safety issue.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.212-227
• /
• 2012

Current research trends in wood preservatives for enhancing durability was reviewed. Due to leaching of recent Copper-Based Preservatives commonly used as chemicals for pressure treatment; they have been a growing concern, especially in improving the fixation of the copper as alkyl ammonium quat. and azol in wood and preventing the leaching of active ingredients. With the appearance of emulsion type chemicals using micronized and nano-sized wood preservatives, researchs on characteristics of Copper-Based Preservatives regarding penetration and fixation in wood are debatable. Moreover, unlike the case of CCA, the recent alkyl ammonium quat. and azol bear a serious threat in the decrease of antimicrobial effectiveness against wood destroying fungi with copper tolerance. Therefore, development and research of co-biocide is needed.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.358-364
• /
• 2008

Wood-inorganic material composite (WIC) was prepared by impregnating wood with copper sulfate ($CuSO_4\;5H_2O$) solution and by immersed wood in sodium carbonate($Na_2CO_3$) solution in order to introduce insoluble copper compounds {copper carbonate hydroxide, $CuCO_3\;Cu(OH)_2$} into the wood to give fungicidal effects in treated-wood. The weight percent gains (WPGs) of treated wood reached maximum value by impregnation of 20% copper sulfate solution and immersion in about 15% sodium carbonate solution for 24 hrs. Inorganic substances were present mainly in the lumina and cross-field pitting of tracheides. These substances were proved to be the insoluble copper carbonate hydroxide against water by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDXA). The treated specimens showed high preservative effectiveness because the weight losses were hardly occurred by the fungi degradation test.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.66-72
• /
• 1995

The rate of fixation of the components were evaluated in CCA-Type B and CCFZ-treated radiata pine sapwood by quantitative analysis of solution expressed from the treated wood. The leaching characteristics of radiata pine blocks treated with CCA-Type B and CCFZ were also evaluated by the AWPA standard leaching test. Both fixation and leaching charactersistics of CCA-Type B were compared with CCA-Type C treated wood samples. The rate of CCA-Type B fixation was a little faster than that of CCFZ. However, significant amounts of arsenic was unfixed in the CCA-Type B treated samples and consequently leached. These significant quantities of arsenic liberated from the CCA-Type B treated wood during service may pose some environmental concerns. Arsenic was no longer detectable from CCA-Type C treated samples when fixation was complete, even though the fixation of CCA-Type C was slower in some degree than CCA-Type B. In summary, it could be said that CCFZ was much safer preservative than CCA-Type B by the criterion based on the relative hazard assessed by absolute amount of unfixed element present in the treated wood. Also the decision that CCA preservative has to move from Type B to Type C should be made sooner or later for continuous use of CCA preservative in the future.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.477-484
• /
• 2008

It is inevitable to use chemical germicidal agents like paraben, imidazolidinyl urea and phenoxyethanol to preserve the emulsions which is usually used in cosmetics. Although these chemical preservatives are good enough to reduce the microbiological contamination, they are irritative, allergenic to the skin. Several kinds of polyols are used in cosmetics as moisturizer and solvent. In this study, we evaluate the effects of polyols on anti-microbial activities, safety and resistant index. MIC(minimal inhibitory concentration) of polyols determined against 6 germs including Staphylococcus aureus. The order of MIC was PG $\cong$ DPG $\cong$ 1,3BG > HG > 1,2-PD > 1,2-HD $\cong$ 1,2-OD. The $2{\sim}3\;wt%$ of 1,2-HD(hexanediol) shows good anti-microbial effects in emulsions without allergenic response. Resistant index of 1,2-HD was less than 2 and this value was smaller than that of chemical preservatives. The mechanism of antimicrobilogical effect might be disturb the membrane of germs by investigating using electron microscope. Added to that, using this paradigm, low preservative contents, paraben-free system, and even preservative-free systems can be expected from these results.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.130-134
• /
• 2004

Experiments were conducted to evaluate quality and vase life of cut rose ‘Rote Rose’ cultivated either in soil or hydroponically in rockwool. Rose stems were put in four different preservative solutions, 0.5% chrysal RVB, BS (2% sucrose + 200 mg. L$^{-1}$ 8HQS + 0.3% Chrysal RVB), Sonk1 (BS + 0.1 mM ethionine), and double distilled $H_2O$. Flower stems were displayed at $20\pm1^{\circ}C$, RH 60%, and light intensity of $8.1\mu$mol.$m^{-2}$ .$s^{-1}$ provided by fluorescent lamps for 16 hㆍ$d^{-1}$ Fresh weight and flower diameter during vase life were affected by cultivation method and were greater in hydroponically-grown roses than in soil-grown roses. Among preservative solutions, BS and Sonkl were superior to Chrysal RVB in terms of extending vase life. Vase life of cut rose in Chrysal RVB, BS, and Sonkl over the control was prolonged by about one day.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.2
• /
• pp.35-44
• /
• 1985

The purposes of this study were, first, to investigate retention levels of toxic elements and oxide individual plies for each panel and, second, to examine disproportioning of individual toxic elements Thirty five water gum plywood panels were treated with a copper-chromium-arsenic preservative (CCA) by the soaking process as the treament time were applied. Such individual plies at a distance of 2.5cm, 7.5cm from the edge were assayed for CuO, $CrO_3$, and $As_2O_5$ on the basis of copper, chromium and arsenic content by Atomic Absorption Spectrophotometry. In these experiments, 12mm thickness plywood panels made of water gum, which were selling, were selected for the preservative treatment. Treating solutions were prepared for 10%, dilute solution of copper-chromium-arsenic preservative and then 1, 3, 6, 12 and 24 hours soaking trements in CCA preservative were applied. The results obtained are as follows: 1. The retention of total oxide in the face and back plies (1+7) retained more than the retention of total oxide in the other plies. The total oxide retention for the individual plies except the face and back plies (1+7) was showed in the following orders; cross plies (3+5), cross plies (2+6), core ply (4). 2. The retentions of total oxide increased as the increase of treatment time. The CCA treated plywood retained high levels of total oxide retention in the face and back plies (1+7). 3. All the retentions in the face and back plies (1+7) is over 5Kg/$m^3$, New Zealand Timber Preservation Standards Specification, and after 6 hours, the retentions in the cross plies (3+5) is over 4. The relative penetration of copper, chromium, and arsenic were not affected by the treatment time. The proportion of arsenic decreased in relation to both copper and chromium and the proportion of copper increased in relation to both chromium and arsenic. 5. A disproportioning of copper, chromium occurred with longer distance from edge, and with longer distance from edge the leachability resistance of CCA treated specimens decreased. After 6 hours (soaking time), the proportion of active elements at a distance of 2.5cm from the edge was consistent. And after 24 hours-soaking, the proportion of active elements at a distance of 7.5cm from the edge was consistent.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.544-558
• /
• 2017

The objective of this research is to investigate preservative efficacy for refractory species in field tests. The field tests were set up to evaluate the preservative performance of western hemlock and white spruce preservative-treated to the residential products group C and D of Canadian standard (CSA O80 Series-08) that have been developed for residential use in above-ground and ground-contact conditions, respectively. They were incised and pressure-treated with alkaline copper quaternary (ACQ) or copper azole (CA). Treated samples for the ground contact stake test and ground proximity test were installed in Jinju, Korea on November 2010 according to AWPA E7-09 and AWPA E18-06, respectively. Each sample has been annually assigned ratings for decay and termite attack, based on AWPA E7 grading system. After six years and five months of exposure, the untreated samples showed decay and particularly severe damage by termite attack but all the preservative-treated samples showed no decay. The results showed that the 5-mm penetration depths may be applicable for the treatment of refractory species. This paper discusses what to consider for the use of refractory species in Korean wood preservation industry from the penetration and retention points of view.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.633-642
• /
• 2018

The purpose of this study was to assess the antioxidant, anti-inflammatory and preservative effects of Water Chestnut from 70% ethanol extracts. The toxicity of extracts from Water Chestnut investigated using the RAW 264.7 cell showed higher than 90% of cell survival rate. The total content of polyphenol ethanol extract was $353.1{\pm}5.6mg/g$, while the total content of flavonoid was $26.2{\pm}1.4mg/g$. With a concentration level of $1{\sim}1000 ({\mu}g/m{\ell})$ ethanol extract of Water Chestnut the range of removal of 1, 1-diphenyl-2-picryl-hydrazyl (DPPH) radicals was $17.0{\pm}2.8%{\sim}88.6{\pm}0.6%$ respectively and the range of removal of 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals was also $2.3{\pm}0.8%{\sim}93.9{\pm}0.2%$ respectively. There were decreases in reactive oxygen species(ROS) generations ethanol extracts of Water Chestnut 1, 10, $100({\mu}g/m{\ell})$ and significance decrease at $100{\mu}g/m{\ell}$ (p<.01). As a result of measuring the Nitric Oxide(NO) generation amount of Water Chestnut extract 1, 10, $100({\mu}g/m{\ell})$ concentration exhibited significant (p<.001, p<.01) decreases. For the anti-bacterial features using a paper disk and the preservative features using petri film, no significance was found and therefore water chestnut extracts had not anti-bacterial or preservative features.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.1 s.60
• /
• pp.47-52
• /
• 2007

The antimicrobial properties of medium-chain ($C_{8-12}$) free fatty acids and their 1-monoglyceride derivatives against a wide range of microorganisms we well known. However, previous studies have been mainly focused on the antimicrobial activity against pathogenic bacteria and viruses causing diseases in human or domestic animals' infection. But, there have been few reports describing comprehensive surveys of antimicrobial effects against microorganisms in cosmetics. For a start of this study, we evaluated and compared the preservative activities of $C_8$ (glyceryl caprylate) and $C_{12}$(glyceryl laurate) 1-monoglyceride in cosmetic formulations. From the result, we found that both of them have very excellent preservative activity against bacteria, but less against fungi. And $C_8$ 1-monoglyceride was a little bit more effective than $C_{12}$ 1-monoglyceride. According to the test results to evaluate each antimicrobial activity of glyceryl caprylate towards 5 kinds of microorganisms used in preservation efficacy test in cosmetics, gram-positive bacteria S. aureus and yeast C. albicans were sensitive and mold A. niger was most tolerant to glyceryl caprylate. Therefore, we tried to improve the antimicrobial activity of glyceryl caprylate agianst mold such as A. niger so that we could make it used as a preservative for cosmetic products. As a result, we confirmed that the antimicrobial activity of glyceryl caprylate is much improved under acidic conditions in formulation. In addition, we found optimal combinations of glyceryl caprylate with other antimicrobial agents. Among tested 7 antimicrobial agent, methyparaben showed the highest preservative activity in combination with gglyceryl caprylate.