• Elastomers and Composites
• /
• 제41권1호
• /
• pp.3-9
• /
• 2006

전분/PVA 블렌드의 기계적 물성에 영향을 미칠 수 있는 인자들을 고려하여 최적화 조건을 조사하였다. 통계적 방법인 다중혼합물 최적법을 사용하였으며, UTM과 인열 강도계를 통하여 블렌드의 인장강도, 파단신율, 초기모듈러스, 인열강도의 측정 결과를 분석하여 전분/PVA 블렌드의 제조 최적 조건을 결정하였다. 최적화 상태의 전분/PVA 블렌드는 농업용 필름의 기계적 물성 중 파단신율을 제외한 나머지 물성이 목표치와 같거나 조금 상회하는 수준을 나타내었다.

• Journal of Pharmaceutical Investigation
• /
• 제3권1_2호
• /
• pp.5-15
• /
• 1973

Fluorometric determination of dl-Methylephedrine hydrochloride from complex preparation were studied. According to the experimental results and considerations obtained the results for the following. (1) dl-Methylephedrine hydrochloride in Hydrochloric acid media occurs the fluorescens by Picrolonic acid and Cuppric acetate. (2) The maximum absorption fluorescence wave length of dl-Methylephedrine hydrochloride standard solution is $365m{\mu}$. (3) The relationship between the fluorescence proportions to concentration of standard solution at range of $4.2{\times}10^{-4}\;M$. $6{\times}10^{-4}M$. (4) dl-Methylephedrine hydrochloride was precisely determined even in the presence of various components, especially Chloropheniramine maleate, Dextromethorphan hydrobromide and Diphenylhydramine hydrochloride. (5) This method has high sensitivity and is simple in precedure. (6) This method be applicable with 99.79% accuracy and was 99.5% in complex preparation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.714-718
• /
• 2003

Usually for the commercial preparation of barium titanate films or ceramics the reaction atmosphere must be preferably in air. However, normally air is not used because it contains carbon dioxide, which can easily react with barium to form the undesired product barium carbonate, leading to unwanted second-phase formation in the (mal stages of the process. In the present work a series of perovskite barium titanate films was prepared by the sol-gel method, using a metal alkoxide solutions in the electrophoretic deposition (EPD). The influence of several process parameters, like sintering temperature of sol preparation before EPD and heat-treatment temperature and non-oxidized atmosphere, on the film properties is described.

• Food Science and Biotechnology
• /
• 제14권6호
• /
• pp.818-822
• /
• 2005

Beta-1,4-mannotriose was prepared by the enzymatic hydrolysis of poonac and the subsequent elimination with yeast of monosaccharides and disaccharide from the resultant hydrolysate. The enzyme system hydrolyzed poonac and produced monosaccharides, disaccharide and ${\beta}$-1,4-mannotriose without other oligomers at the final reaction stage. Poonac (50 g) was hydrolyzed at $50^{\circ}C$ and pH 6 for 48 hr with the crude enzyme solution (500 mL) from Trichoderma harzianum. The elimination of monosaccharides and disaccharide from the hydrolysis products with a yeast (Candida guilliermondii) produced 10.5 g of crystalline [${\beta}$-1,4-mannotriose without the use of chromatographic techniques. After 48 hr of yeast cultivation, the total sugar content fell from 4.8% to 3.4%, and the average degree of polymerization (D.P) rose from 2.5 to 3.2. The preparation method presented was confirmed to be suitable for the preparation of mannotriose from poonac.

• 대한화학회지
• /
• 제9권2호
• /
• pp.96-100
• /
• 1965

우리나라 硏究用 原子爐 TRIGA Mark Ⅱ에 依한 無擔體의 Fe-59를 製造할 目的으로 分離法과 放射化學的 純度 및 核反應斷面積을 檢討하였다. 分離된 Fe-59를 ${\gamma}$-ray spectrometry와 半減期測定에 依하여 純度를 定한 結果 99.9%以上이었다.

• Journal of Pharmaceutical Investigation
• /
• 제16권2호
• /
• pp.72-75
• /
• 1986

A convenient high performance liquid chromatographic method was established for the quantitative determination and content uniformity test of aclatonium napadisilate preparation. This method was more simple to make the sample solution for injection, and easy to determine the content in the preparation. Aclatonium napadisilate was chromatographed using a $Lichrosorb-NH_2$ column $(4mm\;{\times}\;25\;cm$, and acetonitrile-water mixture (83:17) as an eluent at a flow rate of 1.8 ml/min. RI-detector response was linear over a range of $0.5{\sim}2.0%$ aclatonium napadisilate under above conditions. Reproducibility studies gave relative standard deviation of 1.29%.

• 동아시아식생활학회지
• /
• 제5권2호
• /
• pp.27-38
• /
• 1995

This study was conducted to standardize ingredient ratio and preparation method of mafor traditional special kimchies in kyungsang province, korea. There were about 35 varieties of special kimchi in Kyungsang province. Six varieties of them such as burdock kimchi, wild leek kimchi, green thread onion kimchi, perilla leaf kimchi, Godulbaegi(Korean wild lettuce) kimchi, and red pepper leaf kimchi were selected, because they tasted good and the physiological functions of their main ingredients were excellent. The ingredient ratios of the selected special kimchi were standardized through surveying hereditary preparation of some families in kyungsang province and using the literatures including cooking books. The standardized ingredient ratio of the burdock kimchi was 15.1 pickled anchovy juice, 6.8 red pepper powder, 5.7 garlic, 2.2 ginger, 18.0 rice flour paste, 13.5 green thread onion, and 1.2 sesame seed in proportion to 100 of burdock. The standardized preparation step of the selected special kimchies was similar except some preprocessing methods of main ingredients. The diagonally cut-up burdock ws usually parboiled or soaked in salted water, then it was mixed with the other ingredients. Wild leek and green thread onion were usually pickled with salt or pickled anchovy juice. Sometimes the green thread onion pickled was dried in the sun. General preprocessing of perilla leaf, Korean wild lettuce, and red pepper leaf was soaking them in salted water for about 5-10 days. Sometimes red pepper leaf was heated with steam and dried in the sun, then it was mixed with the other ingredients.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.9-15
• /
• 1992

Electroless copper plating method using an alkaline bath have been employed in copper coating of the (LM)Ni4.5Co0.1MnO.2A10.2 hydrogen storage alloy powders for electrode preparation. The plating were conducted without any pretreatment of alloy powders. For the preparation of the electrodes, about 0.12g of the copper coated alloy powder (copper to alloy ratio 1/3 by weight) was compacted with pressure of 6 tons/cm2 at room temperature. The disk-type compacts had a diameter of 10mm and thickness of about 0.24mm. The electrode characteristics were examined through SEM observations and electrochemical measurements in a half cell. The electrochemical measurement showed that the maximum discharge capacity of the electrodes prepared by using alkaline bath were 245mAh per gram of coated alloy (327mAh per gram of alloy) and appeared a considerable degradation with increasing number of cycles. The decrease of the discharge capacity after 100 cycles was about 30% It can be suggested that, with a slight of improvement, this electroless copper plating method could be applied to the preparation of the rare earth-nickel based alloy electrode.

• Applied Microscopy
• /
• 제48권2호
• /
• pp.49-53
• /
• 2018

A successful transmission electron microscope (TEM) analysis is closely related to the preparation of the TEM specimen and should be followed by the suitable TEM specimen preparation depending on the purpose of analysis and the subject materials. In the case of the Si-based anode material, lithium atoms of formed Li silicide were removed due to ion beam and electron beam during TEM specimen preparation and TEM observation. To overcome the problem, we proposed a new technique to make a TEM specimen without the ion beam damage. In this study, two types of test specimens from the Si-based anode material of Li-ion battery were prepared by respectively adopting the only focused ion beam (FIB) method and the new FIB-ultramicrotome method. TEM analyses of two samples were conducted to compare the Ga ion damage of the test specimen.

• 대한가정학회지
• /
• 제50권7호
• /
• pp.59-66
• /
• 2012

The purpose of this study was to identify a causal relationship in the career preparation behavior, parental social support, career decision making self-efficacy and the career maturity of the pre-service elementary school teachers. A total of 374 questionnaires were used for data analysis, excluding the 23 copies deemed insincere in response. To ensure the reliability and validity of the questions, technical statistics of the frequency, ratio, average, standard deviation, skewness, and kurtosis via PASW 18.0, item-total correlation, the totality, and the reliability analysis. The structural analysis via AMOS 7.0 in the bootstrapping method was undertaken to perform the path analysis among the variables and to assess the suitability of the model. The findings of the study led to the following conclusions: First, the causal model for the career preparation behavior, parental social support, career decision making self-efficacy, and the career maturity of the pre-service elementary school teachers is suitable to empirical analysis on research variables. Second, the career decision making self-efficacy of pre-service elementary teachers has direct effect on career preparation behavior positively. Third, parental social support of the pre-service elementary teachers has indirect effects on the career preparation behavior positively.