• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.145-149
• /
• 2005

[ $Eu^{2+}$ ]-activated barium magnesium silicate phosphor, $(Ba,Ca)_{3}MgSi_{2}O_{8}:Eu_{x}$, has been known to emit blue-green light. In this study we report the manufacturing processes for producing either pure green or pure blue light-emitting phosphor from the same composition of $Ba_{2-x}Ca_{2}CaMgSi_{2}O_{8}:Eu_{x}$ (0 < x < 1) by controlling heat treatment conditions. Green light emitting phosphor of $Ba_{1.9}CaMgSi_{2}O_{8}:Eu_{0.1}$ can be produced under the sample preparation condition of highly reducing atmosphere of $23\%\;H_2/77\%\;N_2$, while blue or blue-green light emitting phosphor under reducing atmosphere of $5\~20\%\;H_2\;/\;95\~80\%$ N_2. The green light-emitting phosphors are prepared in two steps: firing at $800\~1000^{\circ}C$ for $2\~5$ h in air then at $1100\~1350^{\circ}C$ for 2-5 h under reducing atmo­sphere $23\%$ $H_2/77\%\;N_2$. The excitation spectrum of the green light-emitting phosphor shows a broadband of $300\~410$ nm. The emission spectrum has a maximum intensity at the wavelength of about 501 nm. The CIE value of green light emission is (0.162, 0.528). The pure blue light-emitting phosphors can be produced using the $Ba{2_x}CaMgSi_{2}O_{8}:Eu_{x}$ by introducing additional firing step at $1150\~1300^{\circ}C$ in air before the final reducing treatment. The XRD analysis shows that the green light-emitting phosphor mainly consisted of $Ba_{1.31}Ca_{0.69}SiO_{4}$ (JCPDS $\#$ 36-1449) and other minor phases i.e., $MgSiO_3$ (JCPDS $\#$ 22-0714) and $Ca_{2}BaMgSi_{2}O_{8}$ (JCPDS $\#$ 31-0128). The blue light-emitting phosphor mainly consisted of $Ca_{2}BaMgSi_{2}O_{8}$ phase.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.297-302
• /
• 2018

Bead type and hollow fiber type catalyst (HFC, Hollow Fiber type Catalyst) was prepared by $La_{0.1}Sr_{0.9}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF1928) perovskite powder catalyst which showed excellent methane complete oxidation characteristics through previous studies. The HFC have a cylindrical shape with an empty interior, and pores can be formed through Phase inversion method so the specific surface area can be remarkably improved. In the case of the bead type catalyst prepared by adding Methyl Cellulose (MC), $SrCO_3$ was produced in addition to the original catalyst composition of LSCF1928 due to the reaction of $CO_2$ emitted from MC and Sr of the catalyst. In the case of the HFC, a single phase perovskite structure was obtained without impurities. The HFC calcined at $700{\sim}900^{\circ}C$ showed pore structure of finger-sponge-finger structure, and 99.9% oxygen conversion rate was achieved through complete oxidation of methane at $475^{\circ}C$. Air gap and spinning pressure condition were changed to control the HFC pore. 2 cm air gap and 7 bar spinning pressure showed the best catalytic performance and achieved oxygen conversion rates of more than 70.65%, 93.01%, and 99.99% at $425^{\circ}C$, $450^{\circ}C$ and $475^{\circ}C$, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.1017-1021
• /
• 1999

Shindari, a traditional low alcoholic drink in Cheju island, was prepared with nuruk and the rice porridge. The rice porridge was fermented with 10% nuruk at a temperature of $25^{\circ}C,\;35^{\circ}C,\;45^{\circ}C$ for 24 hours. In all temperature, total acidity and oBrix were increased gradually and pH were decreased gradually and viscosity were considerably decreased after 2 hours and then slightly decreased. Alcohol contents were also increased during fermentation and especially at $45^{\circ}C$. The organic acids were mainly found phytic acid and succinic acid. The fermented liquids rice porridge contained maltose and glucose as free sugar, amount of them increased during fermentation. Lactic acid bacteria cell count increased at higher tem perature of fermentation and reached to $10^{7}\;cfu/ml\;at\;35^{\circ}C$ for 10hr. In conclusion, the optimal fermentation conditions Shindari preparation were at $35^{\circ}C$, 24hrs. pH, titratable acidity, viscosity and soluble solids in the optimal fermentation condition were 4.2, 0.18%, 190cp, $12.2^{\circ}Brix$, respectively.

• Journal of Korean Academy of Nursing
• /
• v.2 no.1
• /
• pp.97-113
• /
• 1971

The purpose of this study was to investigate the preoperative anxiety of surgical patients and to observe the effects of an experimental nursing process on the incidence of vomiting, the number of analgesics used and the voiding ability of surgical patients within a 48 hour postoperative period and also the number of postoperative days in the hospital. This study me based on a sample of 51 patients who were scheduled for abdominal surgery. They were assigned alternately to experimental and control groups. Patients assigned to the experimental group were given nursing care by the writer, using an experimental nursing process. This is a process directed toward helping the patient obtain a suitable psychological state for surgery. This process was performed by use of the following steps: 1. The nurse approached the patient with interest and concern, and observed the patient's behavior to determine the presence of anxiety. 2. The nurse explored further to find out what was causing the anxiety and what was needed too relieve it. 3. The nurse listened carefully lo the patient. 4. The nurse gave an opportunity for expression of individuality. 5. The nurse showed friendliness and reassured the patient 6. The nurse gave instruction about deep berating, turing and coughing and gave an explanation of routine preoperative preparation which decreased the unknown and so decreased the patient's anxiety- The findings of this study are as follows: 7. The investigation of preoperative anxiety through observing and interviewing revealed patients were concerned about the following: a. Length of stay in the hospital 69.7% (31 cases) b. Condition unimproved o. worse 48.,8% (30 cases) c. Postoperative pain and discomfort .56.8% (29 cases) 2. The results of the study regarding the four hypothesis were as follows: a. Preoperative psychological care not reduce the number of analysis needed during the 48 hour period following surgery. b. Preoperative psychological care did not reduce the Postoperative incidence of vomiting c. Preoperative psychological care had no influence on voiding ability following surgery. d. Preoperative psychological care significantly reduced the number of postoperative days in tile hospital. The experimental nursing process proved to be successful in decreasing the length of postoperative hospitalization (improving rate of healing). This study has demonstrated further that the relief of anxiety (emotional distress) is part of the nurse's professional role. In order to be sure psychological care is given it is important to make a nursing care plan which .includes a plan for the psychological care needed by the patient. As this care is given it can be charted off by each nurse just as medication and treatments are checked after they are given.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.252-261
• /
• 1994

The $(Ba_{1-X}Sr_X)ZrO_3$ powder showing chemically pure and fine particle size was attempted to be synthesized by the oxalate method. The objective of this study is to determine the optimum synthesis condition of stable $(Ba_{1-X}Sr_X)ZrO_3$ powder in terms of the temperatures coefficient of resonant frequency ${\tau}_f$ by examining the microstructure and dielectric properties of the synthesized powder. The six compounds (x=0, 0.2, 0.4, 0.6, 0.8, 1) of $(Ba_{1-X}Sr_X)ZrO_3$ were prepared by the oxalate method, and then calcined at $1000^{\circ}C$ to obtain the crystalline $(Ba_{1-X}Sr_X)ZrO_3$ powder. The synthesized powder showed the globular-shape and average particle size of less than $0.2 \mu\textrm{m}$. The composition of x=0.5, i.e., half of Ba was replaced by Sr, is experted to show the zero value of temperatures coefficient of capacitance ${\tau}_c$.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.170-175
• /
• 2004

The ferroelectric (Y $b_{x}$ $Y_{1-x}$)Mn $O_3$ thin films were fabricated by sol-gel method using Y-acetate, Yb-acetate, and Mn-acetate as raw materials. The stable (Y $b_{x}$ $Y_{1-x}$)Mn $O_3$ precursor solution (sol) was prepared through the reflux process with acetylaceton as a catalyst and coated on Si(100) substrate by spin coating. The heat treatment temperature and, Rw ($H_2O$/alkoxide moi ratio) dependence on crystallinity of thin films were studied. The lowest temperature for obtaining YbMn $O_3$phase and the optimum heat-treatment conditions were proved as at 7$50^{\circ}C$ and 80$0^{\circ}C$, respectively. The hexagonal YbMn $O_3$with c-axis preferred orientation could be obtained at Rw=1 condition. The remanent polarization for the thin films of x=0 or 1 was about 200 nC/㎤ while, for the specimens ot 0< x< 1, were 50∼100 nC/$\textrm{cm}^2$.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.577-582
• /
• 2003

BaTiO$_3$ fine powders were synthesized by hydrothermal process from peroxo-coprecipitate precursors. The peroxo-coprecipitates were obtained by addition of the BaCl$_2$, TiCl$_4$, and $H_2O$$_2$ aqueous solution to an ammonium solution. Hydrothermal reaction was conducted at various reaction temperatures, times and pH ranges. Unlike the conventional hydrothermal synthesis which needs highly alkaline condition over pH 13 with KOH or NaOH, the present method offered well-developed crystalline (perovskite) BaTiO$_3$ powders synthesized below pH 12 with use of ammonium solution. It was found that the phase-pure fine powders were formed at temperatures as low as 11$0^{\circ}C$ and the properties of the powders synthesized over 13$0^{\circ}C$ were almost same regardless of the reaction time. BET surface area of the prepared powder was as high as 76 $m^2$/g and the calculated particle (particulate) size was below 20 nm. The ultrafine particulates formed weak agglomerates. The microstructure and dielectric properties of BaTiO$_3$ ceramics sintered at the temperature range of 1150~125$0^{\circ}C$ were evaluated.

• The Korean Journal of Community Living Science
• /
• v.18 no.2
• /
• pp.323-334
• /
• 2007

This study was made to analyze the condition and the needs of nutrition education considering the different stage of nutrition education recognized by the dietitian in industrial area. 165 female dietitian were surveyed by questionnaire and they were divided into 4 groups according to the different recognition stages of nutrition education: Pre-contemplation(PC) 4.8%, Contemplation(CO) 46.7%, Preparation(PR) 22.4%, Action & Maintenance phase(AM) 26.1%. For statistical analysis, SAS(Ver.8.1. for Window) was used to find out the distribution related with nutrition education and to calculate the scores of mean and standard deviation. General characteristics of the subjects are about 20 years old(71.5%), single(69.7%), careers over 5 years(40%) and university graduates(73.9%). The number of meals(p<0.05) and the employment status(p<0.05) were significantly different according to the recognized stage of nutrition education. The practice of nutrition education was different depending on the dietitian in the industry. Many of the factory dietitian were in pre-contemplation stage(87.5%), however, those in the office and service area were more in Action & Maintenance stage(27.9%). In the industrial area, just 26.1% of dietitian operated the nutrition education and most did not due to the work overload and insufficient support of staff(73.3%). The frequency for the most effective nutrition education was once a month(61.2%). The contents for desirable nutrition education were in the order of 'eating habits'(36.1%), 'relation with the daily life'(23.5%), 'food hygiene' (21.7%), 'nutrition knowledge'(9.7%), and 'disease prevention'(9%). In operating nutrition education, dietitian had concerns about 'insufficient support of staff', 'shortage of teaching materials' and 'lack of time'. And, the dietitian who were with lower recognition stage of nutrition education(P<0.05) concerned more about the insufficient educational contents. In conclusion, dietitian in the industry highly recognized the need of nutrition education, but it was so difficult to practice. For more programs and various materials should be developed, and the staff's perception, the view of dietitian and the meal service should be changed, too. For the health improvement of industrial workers, it would be necessary to proclaim the importance of nutrition education nationwide.

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.142-147
• /
• 2011

In order to develop a environmentally friendly control protocol for managing tomato leaf mold disease in the field, we employed bacteria- and fungi-based commercially available microbial preparations. The field experiment was conducted from April to July in 2010. Average incidence rates tomato leaf mold caused by Fulvia fulva were 13.1% at the two plastic houses located in Jangsung, Jeonnam area. Initially 11 microbial preparations were tested for antifungal activity against F. fulva in vitro. Among them, 7 selected preparations showed to be inhibited the mycelial growth of the fungal pathogen over 50%. Four microbes suppressed disease incidence as much 50% under greenhouse condition. Eventually in the field two microbial products including Bacillus subtilis GB-0365 and B. subtilis KB-401 respectively were showed control value up to 71.8% for four times sprays from 20 days to 70 days after transplanting. Furthermore, the control value of three times spray program demonstrated 79.3%. Efficacy of the three and four spray programs was more effective than that of non-spray control treatment. Our results indicated that adjustment of application method of commercially available microbial preparation could be used to control a target plant disease as an effective and efficient crop protection system for organic farming.

• Clean Technology
• /
• v.23 no.4
• /
• pp.364-377
• /
• 2017

In this study, to improve the low surface area of domestic anthracite as raw materials of activated carbon, characteristics on chemical activation and VOCs adsorption of activated carbon according to mixing ratio of anthracite and lignite. For these, properties of raw materials, parameter characteristics of preparation processes for activated carbon, and VOCs adsorption characteristic of the prepared activated carbon are analyzed. The experimental results showed that, the domestic anthracite had disadvantages of high contents for ash and lead, arsenic, which were exceeded for the heavy metal limits, in the properties of raw materials. To improve these diadvantages, using the mixing ratio of anthracite and lignite, and the optimum conditions for pretreatment, activation, washing, and pellitization process, the activated carbon had a range of BET (Brunauer-Emmett-Teller) surface area of $1,154{\sim}1,420m^2g^{-1}$ with mesopore development and hydrophobic surface property. The carbons were satisfied with the quality standard for granular activated carbon, and had similar physicochemical properties with the commercial activated carbon. The minimum mixing condition for commercial VOCs activated carbon performance must have the caloric value of above $5,640kcal\;kg^{-1}$, and the carbon had higher adsorption capacity with order of xylene > toluene > benzene according to more higher molcular weight and hydrophobic property.