• The Korean Journal of Pharmacology
• /
• v.28 no.2
• /
• pp.163-170
• /
• 1992

The present study was attempted to investigate the effect of cyclobuxine (a steroidal alkaloid) on generation of reactive oxygen metablite and myocardial damage promoted by an exogenous administeration of arachidonate in ischemic-reperfused hearts. Langendorff preparation of the isolated rat heart was made ischemic condition by reducing the flow rate to 0.5 ml/min for 45 min, and then followed by normal reperfusion (7 ml/min) for 5 min. The generation of superoxide anion was estimated by measuring the SOD-inhibitable ferricytochrome C reduction. The degree of lipid peroxidation in myocardial tissue was estimated from the tissue malondialdehyde (MDA) concentration using thiobarbituric acid method. The myocardial cell damage was observed by measuring LDH released into the coronary effluent. Sodium arachidonate $(0.1\;and\;1.0\;{\mu}g/ml)$ infused during the period of oxygenated reperfusion stimulated superoxide anion production dose-dependently. The rate of arachidonate-induced superoxide anion generation was markedly inhibited by cyclobuxine $(1.0\;and\;10\;{\mu}g/ml)$. The production of malondialdehyde was increased by infusion of arachidonate. This increase was prevented by superoxide dismutase (300 U/ml) and cyclobuxine $(1.0\;and\;10\;{\mu}g/ml)$. The release of LDH was increased by sodium arachidonate was also inhibited by superoxide dismutase and cyclobuxine. In conclusion, the present results suggest that cyclobuxine inhibits the production of reactive oxygen metabolite and myocardial damages which were promoted by an administeration of arachidonate during reperfusion of ischemic hearts.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1128-1135
• /
• 2019

In this study, different types of polyether amines and H₁₂MDI were used to synthesize water dispersed urea resins, which can be applied to coating material on the concrete slabs for bicycle road using the ordinary application equipments. The concentrations of several polyether amines with different molecular weights and the number of amine functionality were varied to set up the optimal condition for water dispersed urea resin preparation with both an excellent tensile strength and an elongation. In addition, the effect of DMPA[2,2-Bis(hydroxymethyl)propanoic acid] concentration on the storage stability of the water dispersed urea resin was also investigated. The formation of urea bonds from isocyanate and polyether amines was confirmed through FT-IR ATR spectroscopy. From the mechanical properties of urea resins, PU-4 and PU-6, which were prepared with both diamines and triamine of different molecular weights and number of functionality, showed the tensile strength of 10.5 N/㎟ and 12.7 N/㎟, respectively and the elongation of 1165 % and 969%, respectively. Among the water dispersed urea resin synthesized with different contents of DMPA, PU-6 showed the highest mechanical properties, a tensile strength of 14.2 N/㎟ and an elongation of 993%. In addition, the water dispersion state of this PU-6 was the most stable even after 8 weeks.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.119-127
• /
• 2011

The main purpose of this paper is to apply Zone 30 system which is being experimented in advanced country for the solution of controlling the residential street's speed to our country with the consideration of the real condition of our street and traffic and to run this system as an example to analyze the effect and at the same time, analyze the problem and get appropriate preparation for this system to be widespread. The area to run this model project is Goyang City Ilsan-Gu.($0.65km^2$) which is close with the commercial area reflecting the opinion of experts and an on-site verification by the National Police Agency T/F and is having a heavy pedestrian traffic and the risk of pedestrian accident. Firstly we defined residential street and residential street area to review the system and devided the residential street type to establish a plan of operation. Afterwards, we thoroughly examined the model project area and analyzed the problem and solution. We finally completed establishing a facilities by conference with a local autonomous entity with the improvement of facility's sketch at the analysis of the model project area. The result of effects analysis which we devided after and before of establishment is that vehicle speed be reduced 5~15km/h, and traffic accidents has decreased by 24 percent.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.25-31
• /
• 2010

Polymer core and metal shell composite particles have been prepared by the electroless nickel plating on the surface of monodisperse polystyrene microspheres. Various sizes of polystyrene particles with highly monodisperse state could be synthesized by controlling the dispersion medium in dispersion polymerization. Electroless nickel plating was performed on the polystyrene particle with diameter of $3.4\;{\mu}m$. The morphology of polystyrene/nickel composite particles was investigated to see the effect of the plating conditions, such as the $PdCl_2$ and glycine concentrations and the dropping rate of nickel plating solution, on nickel deposition. With $PdCl_2$ and glycine concentrations at more than 0.4 g/L and 1 M, respectively, more uniform nickel layer and less precipitated nickel aggregates were formed. At the given plating time of 2 h, the same amount of plating solution was introduced by varying the dropping rate. Though the effect of dropping rate on particle morphology was not noticeable, the dropping rate of 0.15 mL/min for 60 min showed rather uniform plating.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.147-156
• /
• 2005

It is well-known that polyethersulfone (PES) has high $CO_2$ selectivity over $N_2\;(or\;CH_4)$ and excellent pressure resistance of $CO_2$ plasticization among muy commercialized engineering plastics[1-4]. Asymmetric PES hollow fiber membranes for flue gas separation were developed by dry-wet spinning technique. The dope solution consists of PES, NMP and acetone. Water and water/NMP mixtures are used in outer and inner coagulants, respectively. Gas permeation rate (i.e., permeance) and $CO_2/N_2$ selectivity were measured with pure gas, respectively and the micro-structure of hollow fiber membranes was characterized by scanning electron microscopy. The effects of polymer concentration, ratio of NMP to acetone, length of air gap, evaporation condition and silicone coating were investigated on the $CO_2/N_2$ separation properties of the hollow fibers. Optimized PES hollow fiber membranes exhibited high permeance of $25\~50$ GPU and $CO_2/N_2$ selectivity of $30\~40$ at room temperature and have the apparent skin layer thickness of about $0.1\;{\mu}m$. The developed PES hollow fiber membranes, would be a good candidate suitable for the flue gas separation process.

• The Korean Journal of Malacology
• /
• v.21 no.1
• /
• pp.25-31
• /
• 2005

The embryos of marine bivalves have been commonly used in bioassays for the quality assessment of marine environments. Although several standard protocols for developmental bioassay with bivalves have been already proposed, there have been few trials for applying these protocols in environmental assessment, or for developing new protocol with Korean species. So, there is a strong need to establish the standard bioassay protocols using bivalves commonly found in Korean waters. Prior to developing a new protocol, it is essential to know the optimum conditions for the reliable bioassay procedures. Here, we established the purpose of this study to determine the optimum bioassay conditions for successful development of a common mussel, Mytilus galloprovincialis. The conditions considered as critical for developmental bioassay, and determined in this study were; (1) temperature, (2) salinity, and (3) initial density of embryo. The optimal temperature for developmental bioassay of M. galloprovincialis was determined as $15^{\circ}C$. At this temperature, the required time for the embryo to become veliger larva was 48 hr. The acceptable range of salinity for the embryotoxicity test using M. galloprivincialis was from 30 to 35 psu, which was narrower than that of the natural habitat of adult populations. The optimum density of embryo at the beginning of bioassay was 100 embryos/ml. Over this density, the proportion of normally developed larvae decreased significantly. The results obtained in this study will serve as a basis for preparation of the standard bioassay protocol using embryo of M. galloprovincialis.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.5
• /
• pp.613-619
• /
• 2013

Konjac gel is known as a low calorie food, because the main component is water. Mugwort has been used for food and medicine for a long time due to itsfunctional property, which contains a lot of vitamins and minerals. Therefore, konjac noodle-added mugwort was prepared. The konjac gel was made by from a centrifuge after adding water, alkali and mugwort power in konjac flour. The centrifuge was used to remove air in the gel. After centrifuging by heating the gel in boiling water for one hour, konjac noodle was made by pressing using a flat heating press. The results are as follows. In the drying process of mugwort freeze drying after blanching in 1% $NaHCO_3$ solution is better than other drying methods. The physical properties (hardness, elasticity, cohesiveness, gumminess) of konjac gel were measured with a Rheometer. The optimum processing conditions were decided by these measured values. The optimum condition of making konjac gel is 9% concentration of konjac flour, a ph of 12.0, $Na_3PO_4$ coagulant and 1.5% concentration of mugwort power in konjac flour.

• Journal of the Korean Chemical Society
• /
• v.62 no.1
• /
• pp.24-29
• /
• 2018

Despite the great potential for the versatile applications in food industry and medical area, chitosan as a biocompatible cationic polysaccharide has suffered from the limited solubility under physiological condition. Herein, we demonstrated the electrostatic formation of chitosan-based polyplex particles, counterbalanced by polyacrylate as an anionic polyelectrolyte. The resulting polyplex exhibited pH- and composition-dependent changes in their surface charges as measured by zeta potential, which can be employed to provide the interparticle repulsive forces for enhanced colloidal stability in homogeneous solution. Subsequently, amide coupling between the acrylates and glucosamine residues of chitosan inside the polyplex further generated the hydrogel particles, which showed the temperature-sensitive swelling property. This aspect can be attributed to the partial formation of acryl amide residues, which have been generally known to possess the lower critical solution temperature (LCST).

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.99-107
• /
• 1997

This study Provides the treatment methods of liquid wastes from the dissolution/purification process of nuclear fuel raw material and the fabrication process of nuclear fuel powder. One of the treatment methods is to process liquid waste from uranium raw material dissolution/purification process. This waste, of the strong acid, can be reused to dissolve the fine ADU particles in filtrate which is ADU waste of pH 8.0 converted from AUC waste after recovery of uranium. To dissolve the fine ADU particles, ADU filtrate was pretreated to pH 4.0 with the dissolution/purification waste, and then mixed with the lime to pH 9.2 and aged for 30 minutes. From this processing, uranium content of the filtrate was decreased to below 3ppm. The waste from fuel powder fabrication is emulsified solution dispersed with fine oil droplets. This emulsion was destroyed effectively by adding and mixing the nitric acid with rapid heating at the same time. After this processing, $Na_2U_2O_7$ compound is produced by addition of NaOH. Optimum condition of this processing was shown at pH 11.5, and uranium content of the filtrate was analyzed to 5ppm. To remove the trace of uranium in the filtrate, lime should be added. Otherwise, 4N nitric acid was used to destroy the emulsion directly, and then lime was added to this waste. Uranium content of the treated filtrate was below 1 ppm. In addition to these wastes, the trace of uranium in filtrate after recovery of uranium from the AUC waste which is produced during PWR power preparation, is treated with NaOH to takeup fluorine(F) in the waste because fluorine is valuable and toxic material. In the finally treated waste, uranium was not detected.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.430-437
• /
• 1997

Uranyl-peroxide compound was prepared by the reaction of excess hydrogen peroxide solution and trace uranium in filtrate from nuclear fuel conversion plant. The $CO_3{^{2-}}$ in filtrate was removed first by heating more than $98^{\circ}C$, because uranyl-peroxide compound could not be precipitated by $CO_3{^{2-}}$ remaining in filtrate. The optimum condition for uranyl-peroxide compound was ageing for 1 hr after controling the pH with $NH_3$ gas and adding the excess $H_2O_2$ of 10ml/lit.-filtrate. Uranium concentration in the filtrate was appeared to 3 ppm after the precipitation of uranyl-peroxide compound, and the chemical composition of this compound was analyzed to $UO_4{\cdot}2NH_4F$ with FT-IR, X-ray diffractometry, TG and chemical analysis. Also, this fine particle, about $1{\sim}2{\mu}m$, could be grown up to $4{\mu}m$ at pH 9.5 and $60^{\circ}C$. The separation efficiency of precipitate from mother liquor was increased with increase of pH and reaction temperature. Otherwise, the crystal form of this particle showed octahedral by SEM and XRD, and $U_3O_8$ powder was obtained by thermal decomposition at $650^{\circ}C$ in air atmosphere.