• The Journal of the Korean Society for Microbiology
• /
• v.17 no.1
• /
• pp.75-85
• /
• 1982

In order to demonstrate the effect of specific serum IgG antibody on the adherence of Streptococcus mutans to smooth surface and the mechanism of effective adherence inhibition by IgG antibody, in the present study authors obtained purified IgG from different immunogen preparations of S. mutans NCTC 10449(serotype c) and observed the effect of each IgG preparation on the adherence of each S. mutans strain cultured in different conditions. In addition, the present study was undertaken to observe the cross-reactivity of IgG and the effect of sucrose concentration on the adherence of S. mutans in vitro non-growth condition. The adherence of S. mutans to glass surface was effectively inhibited by serum IgG antibody. At the same IgG concentrations, anti-2% fructose grown/1N NaCl washed S. mutans NCTC 10449 cell showed greater adherence inhibitory effect to S. mutans strains than anti-2% sucrose grown and anti-S. mutans NCTC 10449 cell wall, and the greater inhibitory effects of IgG preparations were observed in assay using 2% fructose grown S. mutans cell preparations than using 0.1% sucrose grown cell preparations. These results suggest that the more effective adherence inhibition by serum IgG antibody is due to the reaction with S. mutans cell surface antigens rather than glucan and cell-associated glucosyltransferase. The greatest adherence inhibitory effect of IgG to S. mutans strains was observed on homologous NCTC 10449 strain and the inhibition cross-reactivities were observed between serotype c, e, and f strains. More pronounced cross-reactivity of adherence inhibition of IgG to S. mutans was observed in assay using anti-2% fructose grown/1N NaCl washed cell than using other IgG preparations, and observed in assay using 2% fructose grown S. mutans cell preparations than 0.1% sucrose grown cell preparations. It was interested that low, but adequate concentration of reactive IgG antibody significantly increased the adherence ability of S. mutans. This result may be due to the formation of small cell aggregates resulted in a increase in the numbers of organisms which adhered to glass surface. The adherence of S. mutans to glass surface was possible in the absence of glucan-synthetic activity. Low level of sucrose significantly increased the adherence ability of S. mutans to glass surface, but excessive amount of sucrose induced large cell aggregates resulted in a decrease in the numbers of organism which adhered.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1043-1046
• /
• 1998

Aluminium based inorganic flocculants are extensively used in this country in the removal of fine particles present in the raw water for the production of drinking water. These inorganic flocculants, however, have potential hazard of high residual aluminium ions in the treated waters, which is known to be one of the reasons of alzheimer's disease. Inorganic flocculants alone are sometimes incapable of treating water when there are excessive turbidity in the raw water sources due to flooding. A polyamine type polymeric flocculant has long been used to treat raw water in the drinking water production in the European countries and United State of America. The optimum reaction conditions such as mole ratio of epichlorohydrin(EPI) to dimethylamine(DMA), reaction temperature and time for each stage for the pilot scale preparation of polyamine from EPI-DMA was studied in this work. The variation of intrinsic viscosity and flocculating efficiency in the water treatment of the synthesized polyamines were evaluated. The residual materials after polymerization reaction were analyzed by gas chromatography to study the effect of variation of reaction conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.403-409
• /
• 2018

Inconel 713C which of a commercial Ni super alloy have the composition of 70 % Ni, 12 % Cr, 6 % Al and 4 % Mo. Mo is very expensive and have some economic value to recover in the alloy. In this study, liquid-liquid exraction(solvent extraction and stripping) has been performed to separate Mo from the synthetic leaching solution of spent Inconel 713C alloy and prepare to Mo powder by dying, evaporation and heat treatment. The experiments were conducted by using synthetic leaching solution which was prepared $NaMoO_4$ $2H_2O$ by dissolved in distilled water. Alamine336 and Cyanex272 dissolved in kerosene were used as extractants. The extraction percentage of Mo by Alamine336 is 99 % in the condition of the range of pH 1 to 4 and 1 % of concentration of Alamine336. The stripping solutions are used by HCl, $H_2SO_4$ and $HNO_3$ solutions and the concentrations were controlled by distilled water. The concentrations of HCl, $H_2SO_4$ and $HNO_3$ as stripping solutions are increased, the stripping percentages of Mo are increased and the stripping percentage of Mo by $HNO_3$ is higher than other stripping solutions. After liquid-liquid extraction and heat treatment, $MoO_3$ powder which of the purity of 97.5 % was prepared.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.701-708
• /
• 2019

Animal glue is a natural adhesive made from processed skins or bones of animals. It is widely used in wooden crafts, papercrafts, dancheong painting, and pictures. Accurate evaluation of the quality of animal glues during production and use is difficult because there is no formal method for testing the glue's properties during pretreatment and measurement conditions. Thus, in this study, a series of tests were carried out by changing the conditions of swelling, temperature, and concentration of animal glue and gelatin sold on the market. Twelve types of animal glues were evaluated, having a viscosity range of 12.67 cP to 29.43 cP. The results showed that the physical characteristics of the glues were stable when allowed to swell for six h in distilled water(23℃). When 10%(by weight in distilled water) of the animal glue was measured in the reflective mode of a spectrophotometer, the optical characteristics of the glues were stable. Powdered animal glues have a medium brightness and middle-high chroma. Relative to powdered glues, stick animal glues have a low brightness and a medium chroma. Based on the results of this study, it is expected that the data can be assembled into a form so that animal glue workers can use it as a reference for the preparation of evaluation standards for testing the characteristics of animal glues.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.135-141
• /
• 2013

The purpose of this study is to determine the quantity of selenium in grains by hydride generation-inductively coupled plasma mass spectrometry. Two sample preparation methods, beaker and microwave digestions, are compared and the former shows better result. The optimum condition for hydride generation is 4.0 M for HCl, 3% for $NaBH_4$ with the sample flow of 0.6 mL/min. The detection limit is 0.02 ${\mu}g/kg$($3{\sigma}$) and improved by 10 times. Isobaric interferences on Se is removed by Octopole Reactoin Cell and $H_2$ (3.8 mL/min) shows better performance over He. However, in case Br exists in a matrix, $H_2$ could induce interferences on m/z 80 and 82 ($^{80}[BrH]^+$ and $^{82}[BrH]^+$). The accuracy of this experiment is examined successfully by analyzing several reference materials. The results for several domestic grain analysis show that the concentrations are between 12.7 ${\mu}g/kg$ and 29.6 ${\mu}g/kg$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.499-505
• /
• 1984

For the purpose of obtaining basic data which can be applied to processing of retort pouched shell-fishes, retort pouched seasoned baby clam was prepared. After sand and mud were removed, and then steamed baby clams were shucked. Baby clam meats were seasoned with the mixed seasoning powder containing $3\%$ of sugar, $2.5\%$ of salt, $12\%$ of sorbitol, $0.5\%$ of monosodium glutamate and $10\%$ of smoke flavor, and then dried at $35-40^{\circ}C$ for 3 hours. After dried, the meats were vacuum packed in plastic film bag (polyester/nylon/unoriented polyproylene; $12{\mu}m/15{\mu}m/50{\mu}m,\;15{\times}17cm$), and sterilized for 12 minutes in a hot water circulating sterilzer at $120^{\circ}C$, The factors such as pH, VBN, moisture content water activity, color value (L, a, b), texture, TBA value and viable bacterial count of products were determined during storage at room temperture ($20{\pm}3^{\circ}C$). The results showed that the product could be preserved in a good condition for 120 days at $20{\pm}3^{\circ}C$. Judging from the scores of sensory evaluation on flavor, the product added smoke flavor as seasoning was the most desirable.

• Fisheries and Aquatic Sciences
• /
• v.19 no.3
• /
• pp.14.1-14.10
• /
• 2016

Isoelectric solubilization/precipitation (ISP) processing allows selective, pH-induced water solubility of proteins with concurrent separation of lipids and removal of materials not intended for human consumption such as bone, scales, skin, etc. Recovered proteins retain functional properties and nutritional value. Four roe protein isolates (RPIs) from yellowfin tuna roe were prepared under different solubilization and precipitation condition (pH 11/4.5, pH 11/5.5, pH 12/4.5 and pH 12/5.5). RPIs contained 2.3-5.0 % moisture, 79.1-87.8 % protein, 5.6-7. 4 % lipid and 3.0-3.8 % ash. Protein content of RPI-1 and RPI-2 precipitated at pH 4.5 and 5.5 after alkaline solubilization at pH 11, was higher than those of RPI-3 and RPI-4 after alkaline solubilization at pH 12 (P < 0.05). Lipid content (5.6-7.4 %) of RPIs was lower than that of freeze-dried concentrate (10.6 %). And leucine and lysine of RPIs were the most abundant amino acids (8.8-9.4 and 8.5-8.9 g/100 g protein, respectively). S, Na, P, K as minerals were the major elements in RPIs. SDS-PAGE of RPIs showed bands at 100, 45, 25 and 15 K. Moisture and protein contents of process water as a 2'nd byproduct were 98.9-99.0 and 1.3-1.8 %, respectively. Therefore, yellowfin tuna roe isolate could be a promising source of valuable nutrients for human food and animal feeds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.300-310
• /
• 2018

The purpose of this study is to compare the change of Well-Dying awareness and decision of university student before and after taking the course of death study. A questionnaire survey was conducted for university students 93 before education, 117 after education who participated in the Death Studies related lectures at Daejeon Metropolitan City for 15 weeks from August to December 2016. The general characteristics of survey are gender, age. grade, major, marriage condition, religion, family member living together and health status. Four items on the perception aspect of death, five items on the aspect of acceptance of death, seven items of death decision and twelve items for death education's interest and importance were configured as a reference scale. The statistical method carried out the chi-square test, the independent sample t-test, and the decision tree analysis. Based on the decision tree, At the time of preparation for death(cancer patient, terminal patient, etc.) and the elderly(65 years old or older), the education transition rate was 66.7%. But After education, 65.3% of the respondents were in adult, middle and high school, under elementary school, university, and graduate school, which showed a significant difference. Therefore we are looking for death education's effectiveness and setting directions for education's period and contents. the negative viewpoints and worries about the implementation of death education at elementary, middle and high schools and universities are resolved and the death education will positively affect the change of attitude of students.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.781-784
• /
• 2013

Ocean dumping of sewage sludge is banned. Therefore, it is needed to develop alternative treatment method. Sewage sludge and waste glass are used to prepare lightweight brick. Large amount of energy is consumed to prepare building material, because of its high preparation temperature, or above $1,200^{\circ}C$. We study to prepare lightweight brick, using sewage sludge and waste glass as raw materials in this research. Lightweight brick was made at low temperature of below $800^{\circ}C$ to reduce $CO_2$ emission by geopolymer technique. Calcination temperature, mixing ratio of sewage sludge/waste glass and water glass/water were discussed to evaluate their effect on the brick prepared. In this study, the optimal conditions for preparing bricks was $750^{\circ}C$ of firing temperature, 1.5 of mixing ratio for water glass/water and 10 : 90 wt% of sewage sludge/waste glass. At this condition, compressive strength and specific gravity of brick prepared were 5.1 MPa and 0.46, respectively. These values satisfy the criteria on a lightweight brick.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2012

Purpose: Cellulose acetate (CA) was blended with polyethyleneglycol (PEG) having different molecular weight at various mixing conditions to enhance melt-processibility of CA, which might prevent the harmful effect resulted from the introduction of phthalic plasticizer. Methods: To establish optimal plasticizing conditions, CA/PEG blends were examined under various plasticizing conditions: PEG concentration, molecular weight of PEG, and plasticzing temperature. Mechanical properties of the CA/PEG blends, as well as migration and exudation of the PEG, were performed in order to evaluate the efficiency of plasticization. Results: Compared to industrial CA resin plasticized by diethyl phthalate, CA/PEG blends exhibited similar thermal plasticization. It was established that the optimum condition was to blend 30~40 phr PEG with molecular weight 400 at $175{\sim}180^{\circ}C$. CA/PEG blend showed superior glassness, PEG stability, and mechanical properties. Conclusions: CA/PEG blends would be a eco-friendly glasses frame to substitute traditional CA glasses frame prepared phthalate plasticizers.