• Culinary science and hospitality research
• /
• v.15 no.4
• /
• pp.99-114
• /
• 2009

This study examined the optimal cooking condition for surimi-like material (SLM) derived from porcine semimembranosus (SM) muscle and the effects of the various cooking temperatures and the cooking time on the gel properties. The most noticeable change that occurred during the preparation of the SLM from the SM was the reduction in the fat content (about 1%) during the washing procedures. The hardness and gel strength value were increased significantly as the cooking temperature was increased by $75^{\circ}C$ for 20 min (p<0.05). The SLMG cooked above $75^{\circ}C$ had a significantly higher WHC than the SLMG cooked below $75^{\circ}C$ (p<0.05). The gelling property of SLMG was effected for different conditions of cooking time and temperatures by the result of SDS-PAGE. After 20 min cooking, some enzyme bands including phosphorylase disappeared. The loss of these bands (about 46 kDa and 60 kDa) was observed after 20 min of cooking time. The photographs of microscopy showed that the filaments of myofibrils did not disappear after a cooking time of 15 min, and that the gaps between the fibers or filament were close. A significant change in the fibers and filaments occurred from 30 min to 35 min of cooking time, and the gradual coagulation of the structure of the SLM was observed with cooking time increased. These results suggest that a desirable surimi gel could be obtained from pork by cooking at $75^{\circ}C$ for 25 min.

• Journal of Food Hygiene and Safety
• /
• v.23 no.2
• /
• pp.169-176
• /
• 2008

The subcronic toxicity of WK-38, a herbal preparation for the atherosclerosis, was examined in male and female Sprague-Dawley rats. WK-38 is composed of Rhei Rhizoma, Magonoliae Cortx, Moutan Cortex Radicis. Rats were treated with the test substance at a dose of 5 mg/kg, 50 mg/kg and 500 mg/kg intragastrically for 13 weeks. Control rats were treated with vehicle only. No death and abnormal clinical signs were observed throughout the administration period. Also there was no difference in net body weight gain, food and water consumption, organ weight, gross pathological findings, and urine analysis among the groups of rats treated with different doses of the WK-38. Hematological findings and biochemical examination revealed no evidence of specific toxicity related to WK-38. The results suggested that under the condition employed in this study no observation effect level (NOEL) of WK-38 would be 500 mg/kg/day.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1197-1202
• /
• 2002

In order to develope the porous $K_2Ti_6O_13$ whisker preform with good strength, the pore characteristics and compressive strength were investigated as a function of spark plasma sintering temperature. As a result, high porous whisker preform were successfully fabricated by sintering at 900∼950${\circ}C$ for 10 min under a pressure of 40 MPa, heating rate of 50${\circ}C$/min and on-off pulse type of 12:2. The whisker preform prepared under above optimum condition showed relatively high compressive strength of 174∼266 MPa, despite of high porosity ranging from 15% to 37%. This improvement in strength was considered to be mainly due to the spark-plasma discharges and the self-heating action between whiskers. The compressive strength of whisker preform, fabricated at sintering temperature less than 900${\circ}C$, showed 80∼100 MPa. This is low strength level less than one half times compared with whisker preform fabricated at 900∼950${\circ}C$. The whisker preform fabricated at 1000${\circ}C$ showed the highest compressive strength of 523 MPa, but resulted in low porosity of ∼5%. Based on above results, it was considered that spark plasma sintering was an effective method for developing high strength and porosity of whisker preform.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.352-358
• /
• 2000

Preparation for the simplified separation of chitosandoligosaccharides from enzymatic hydrolysate was investigated. Two different types of chitosan beads as substrate were prepared as organic-based bead by W/O emulsion method and water-based bead by alkaline treatement. The average size of organic-based bead was $200{\mu}m$, and that of water based beads were $4000{\mu}m$, $100{\mu}m$, $30{\mu}m$, in diameter respectively. Enzyme stability was maintained over 80% at PH 6 after 24 hours. The optimal condition for the production of chitosanoligosaccharides was at pH 6.0, $50^{\circ}C$ and 40U (200U/g-chitosan) According to final oligosaccharide concentration water-based bed showed the similar result with that of organic-based bead even through it had smaller surface area attacked by chitosanse than that of organic-based bead. It is probable that the structure of water-based chitosan bead was looser than that of organic-based bead so enzyme penetrated easily into the bead structure. For the oligosaccharide production versus surface area the different size of water-based beads was investigated, Maxiaml production yield was observed in the $30{\mu}m$ beads. Consequently the water-based chitosan bead was better than the organic-based bead in this reaction system.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.452-459
• /
• 2008

To obtain maximal efficacy with minimal systemic side-effects, many studies have been carried out to achieve the controlled release of 5-fluorouracil (5-FU). In this study, biodegradable poly(L-lactide) (L-PLA) microparticles containing 5-FU were prepared by a process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide. The effects of various organic solvents, drug/polymer feeding ratio, polymer molecular weight, and blending with the same polymers with different molecular weights on the formation of 5-FU loaded microparticles were investigated under a predetermined operating condition from our previous study. The drug recovery, entrapment efficiency, and in vitro drug release kinetics were determined by HPLC assays. The drug recovery obtained from the ASES process was found to be very high, whereas the drug entrapment efficiency was considerably low in all the experiments due to the poor affinity between L-PLA and 5-FU. These results indicated that the precipitation rate of L-PLA might be quite different from that of 5-FU so that there was little chance to form 5-FU loaded L-PLA microparticles.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.114-121
• /
• 2002

Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

• Education of Primary School Mathematics
• /
• v.12 no.1
• /
• pp.39-55
• /
• 2009

For this study, the 'Game Activities' lessons presented in the math textbooks from the 1st grade to the 6th were examined in terms of learning materials, the learning members' make-up, the playing structures, and the relation with the contents. In addition, the survey by means of questionnaires was conducted to analyze the actual condition of teachers' guidance in the field. The findings from this research were as follows: First, as for the activities presented in the textbooks, it turned out that too much emphasis is placed upon plays mainly using learning materials such as cards and dice played by teams of two. In addition, there have been shown negative aspects in various ways of plays putting too much emphasis on certain types of plays such as and structures. As for the relation with the contents, although lots of efforts were taken to connect the playing activity to the lesson contents, there were units presenting plays based on the preceding lesson's repeated activity, ones that have weak link with the contents. Second, it turned out that the teachers had negative attitude on the guidance using the 'Game Activities' lesson, although they were aware of the effects of playing in math learning. This seemed to result from the delicate variety and insufficient preparation for the play. Besides, the findings indicate that the appreciation and activity of the 'Game Activities' lesson presented as a way of performance evaluation. for play need to be provided in school or classrooms for teachers and students to make good use of them.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.195-206
• /
• 1988

Two major issues of the blood bank management are quality assurance and inventory control. Recently, in Korea blood donation has gained popularity increasingly to allow considerable improvement of the quality assurance with respect to blood collection, transportation, storage, component preparation skills and hematological tests. Nevertheless the inventory control, the other issue of blood bank management, has been neglected so far. For the supply of blood by donation barely meets the demand, the blood bank policy on the inventory control has been 'the more the better.' The shortage itself by no means unnecessitate inventory control. In fact, in spite of shortage, no small amount of blood is outdated. The efficient blood inventory control makes it possible to economize the blood usage in the practice of state-of-the-art medical care. For the efficient blood inventory control in Korean hospitals, this tudy is to develop formulae forecasting the standard blood inventory level and suggest a set of policies improving the blood inventory control. For this study informations of $A^+$ whole bloods and packed cells inventory control were collected from a University Hospital and the Central Blood Bank of the Korean Red Cross. Using this informations, 1,461 daily blood inventory records were formulated.48 varieties of blood inventory control environment were identified on the basis of selected combinations of 4 inventory control variables-crossmatch, transfusion, inhospital donation and age of bloods from external supply. In order to decide the optimal blood inventory level for each environment, simulation models were designed to calculate the measures of performance of each environment. After the decision of 48 optimal blood inventory levels, stepwise multiple regression analysis was started where the independent variables were 4 inventory control variables and the dependent variable was optimal inventory level of each environment. Finally the standard blood inventory level decision rule was developed using the backward elimination procedure to select the best regression equation. And the effective alternatives of the issuing policy and crossmatch release period were suggested according to the measures of performance under the condition of the standard blood inventory level. The results of this study' were as follows ; 1. The formulae to calculate the standard blood inventory level($S^*$)was $S^*=2.8617X(d)^{0.9342}$ where d is the mean daily crossmatch(demand) for a blood type. 2. The measures of performace - outdate rate, average period of storage, mean age of transfused bloods, and mean daily available inventory level - were improved after maintenance of the standard inventory level in comparison with the present system. 3. Issuing policy of First In-First Out(FIFO) decreased the outdate rate, while Last In-First Out(LIFO) decreased the mean age of transfused bloods. The decrease of the crossmatch release period reduced the outdate rate and the mean age of transfused bloods.

• Land and Housing Review
• /
• v.6 no.2
• /
• pp.43-48
• /
• 2015

Right after president Keun-Hae Park's announcement at German Dresden on March 2014, both expectation and skepticism have been raised for the Korean unification. The unification would give a great chance for the economic prosperity in the positive sense. In the negative sense, it would only give a great burden to the Republic's financial status. Comparing the expectation of the unification, there are lack of structured preparation, duplicated and/or overlapped systematic approach, and even the national strategies are diffused. There are several individual research papers, analytical data and information, researches on the industry and technology. However most of the previous researches and findings are unstructured and lack of completeness. It is hard to find out the overall feature of the unification strategy. West German has compassed that it knew very few the reality of East German status. The Korean Government may know much less about North Korea's condition comparing to West German. Before the actual unification in the Korean peninsula, it needs the Grand Plan for the national infrastructure and land utilization of the Korean peninsula. During the development of the Grand Plan for the Korean peninsula, the Asian Global transportation network could be developed at the same time. The German's unification experience can give a great opportunity to the development of the Gran Plan. The data and information, and the previous researches should be classified and structured in a way of systematic arrangement. Since most of investment and budget for the unification come from the Korea, it would be very much beneficial for the Korean people. The openness and early exposures of the Grand Plan for the national infrastructure are considered as mandatory action.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.480-489
• /
• 2016

In this study, the PVdF/MGO composite nanofiber membranes (PMGs) introducing Iron oxide-Graphene oxide ($Fe_3O_4/GO$, Metallic graphene oxide; MGO) was prepared via electrospinng method and its arsenic removal characteristics were investigated. The thermal treatment was carried out to improve the mechanical strength of nanofiber membranes and then the results showed that of outstanding improvement effect. However, in case of PMGs, the decreasing tendency of mechanical strength was indicated as increasing MGO contents. From the results of pore-size analysis, it was confirmed that the porous structured membranes with 0.3 to $0.45{\mu}m$ were prepared. For the water treatment application, the water flux measurement was carried out. In particular, PMG2.0 sample showed about 70% improved water flux results ($153kg/m^2h$) compared to that of pure PVdF nanofiber membrane ($91kg/m^2h$) under the 0.3 bar condition. In addition, the PMGs have indicated the high removal rates of both As(III) and As(V) (up to 81% and 68%, respectively). Based on the adsorption isotherm analysis, the adsorption of As(III) and As(V) ions were both more suitable for the Freundlich. From all of results, it was concluded that PVdF/MGO composite nanofiber membranes could be utilized as a water treatment membrane and for the Arsenic removal applications.