• The Korean Journal of Legal Medicine
• /
• 제42권4호
• /
• pp.141-145
• /
• 2018

There have been many radiographic studies on age estimation that evaluate reduction in size of dental pulp cavity with secondary dentin formation. The Paewinsky method reported high accuracy in estimating ages by measuring the width of the pulp cavity in panoramic radiographs. The aim of this study was to evaluate the application of the Paewinsky method to digital periapical radiographs. This study was conducted on 103 cases that reported to the Section of Human Identification of the National Forensic Service. The age was calculated by applying the Paewinsky method that measures the root and pulp canal width at three points in a tooth. The estimation results were compared with those calculated by the Johanson method. When the Paewinsky models were applied to digital periapical radiographs, the errors were significantly greater as compared to the original study. The errors of the maxillary second premolar and mandibular lateral incisor were greater than those of the maxillary central incisor, lateral incisor, mandibular canine, and first premolar. Furthermore, errors of the age estimation models in level C were greater than those in levels A and B. This study could be a reference for the application of the Paewinsky method to digital periapical radiographs.

• 구강회복응용과학지
• /
• 제37권4호
• /
• pp.268-273
• /
• 2021

Paramolar tubercle은 드문 발생학적 치아 기형으로 구치의 협면 또는 설면에서 나타나는 추가적인 교두로 정의된다. 영구치에 융합된 Paramolar tubercle의 존재는 근관치료를 어렵게 하는 원인이 될 수 있다. 그러므로 이러한 변이에 대한 적절한 이해가 성공적인 근관치료를 위해 중요하다. 콘빔 전산화 단층 촬영(CBCT)은 복잡한 증례에서 해부학적 구조를 이해하는 데 도움을 줄 수 있다. 따라서 본 증례는 Paramolar tubercle이 융합된 상악 제2소구치의 비외과적 근관치료에 대한 증례에 대해 보고하고자 한다.

• Journal of Korean Dental Science
• /
• 제14권2호
• /
• pp.69-78
• /
• 2021

Purpose: The primary objective of this study was to evaluate the change in the temperature of the adhesive resin in polycrystalline ceramic brackets irradiated using a diode laser at different irradiation energy levels and times. Materials and Methods: For the measurement of the temperature of the adhesive resin, it was applied at the base of the ceramic bracket, a thermocouple was placed at the center of the base surface, the bracket was placed on prepared resin specimens for light curing, and a laser was irradiated to the center of the bracket slot at 5, 7, and 10 W. For the measurement of the temperatures of the enamel under the bracket and pulp cavity, extracted premolar was fixed to a prepared mold and the ceramic bracket was bonded to the buccal surface of the premolar. The Kruskal-Wallis H test and Friedman test were used for statistical analysis. Result: At 5 W, the temperature of the adhesive resin did not reach the resin softening temperature of 200℃ within 30 seconds. At 7 W, it reached 200℃ when the ceramic bracket was irradiated continuously for 28 seconds. At 10 W, it reached 200℃ when the ceramic bracket was irradiated continuously for 15 seconds. During laser irradiation, the temperature of the enamel under the bracket increased by over 5℃ within 15 seconds. Conclusion: The use of diode laser irradiation for bracket debonding should be carefully considered because the pulp cavity temperature increases by over 5℃ within the irradiation time for resin thermal softening.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.373-384
• /
• 2021

PURPOSE. This study aimed to compare the marginal and internal fit of 3-unit monolithic zirconia restorations that were designed by using the data obtained with the aid of intraoral and laboratory scanners. MATERIALS AND METHODS. For the fabrication of 3-unit monolithic zirconia restorations using impressions taken from the maxillary master cast, plaster cast was created and scanned in laboratory scanners (InEos X5 and D900L). The main cast was also scanned with different intraoral scanners (Omnicam [OMNI], Primescan [PS], Trios 3 [T3], Trios 4 [T4]) (n = 12 per group). Zirconia fixed partial dentures were virtually designed, produced from presintered block, and subsequently sintered. Marginal and internal discrepancy values (in ㎛) were measured by using silicone replica method under stereomicroscope. Data were statistically analyzed by using 1-way ANOVA and Kruskal Wallis tests (P<.05). RESULTS. In terms of marginal adaptation, the measurements on the canine tooth indicated better performance with intraoral scanners than those in laboratory scanners, but there was no difference among intraoral scanners (P<.05). In the premolar tooth, PS had the lowest marginal (86.9 ± 19.2 ㎛) and axial (92.4 ± 14.8 ㎛), and T4 had the lowest axio-occlusal (89.4 ± 15.6 ㎛) and occlusal (89.1 ± 13.9 ㎛) discrepancy value. In both canine and premolar teeth, the D900L was found to be the most marginally and internally inconsistent scanner. CONCLUSION. Within the limits of the study, marginal and internal discrepancy values were generally lower in intraoral scanners than in laboratory scanners. Marginal discrepancy values of scanners were clinically acceptable (< 120 ㎛), except D900L.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.61-67
• /
• 2022

Purpose: This study aimed to evaluate the accuracy of bite registration using intraoral scanner based on data trimming strategy for fremitus teeth. Materials and Methods: A reference model was designed by Medit Model Builder software (MEDIT Corp., Seoul). Tooth number 24 and 25 were separated as dies and tooth number 26 was prepared for full-coverage crown. Those were printed using a 3D printer (NextDent 5100). The scanning procedure was performed by a single trained operator with one intraoral scanner (i700; MEDIT Corp.). The scanning groups were divided as follows: group 1 (G1), no fremitus; group 2 (G2), 0.5 mm buccal fremitus in the maxillary left first and second premolar; and group 3 (G3), 1.5 mm buccal fremitus in the maxillary left first and second premolar. Each group was scanned 10 times and were analyzed using the reference model data. Surface-based occlusal clearance was analyzed at the prepared tooth to evaluate accuracy. Result: Mean values of control group (G1) were 1.587±0.021 mm. G2 showed similar values to those from the control group (1.580±0.024 mm before trimming strategy and 1.588±0.052 mm after trimming strategy). G3 showed significantly greater values (1.627±0.025 mm before trimming strategy and 1.590±0.024 mm after trimming strategy) and the differences were found between trimming strategy (P=0.004). Conclusion: Bite trimming strategy for fremitus teeth is a reliable technique to reduce inaccuracies caused by the mobility at maximum intercuspation.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권4호
• /
• pp.213-220
• /
• 2023

Background: Third molar extraction is the most commonly performed minor oral surgical procedure in outpatient settings and requires regional anesthesia for pain control. Extraction of the maxillary molars commonly requires both posterior superior alveolar nerve block (PSANB) and greater palatine nerve block (GPNB), depending on the nerve innervations of the subject teeth. We aimed to study the effectiveness of PSANB alone in maxillary third molar (MTM) extraction. Methods: A sample size comprising 100 erupted and semi-erupted MTM was selected and subjected to study for extraction. Under strict aseptic conditions, the patients were subjected to the classical local anesthesia technique of PSANB alone with 2% lignocaine hydrochloride and adrenaline 1:80,000. After a latency period of 10 min, objective assessment of the buccal and palatal mucosa was performed. A numerical rating scale and visual analog scale were used. Results: In the post-latency period of 10 min, the depth of anesthesia obtained in our sample on the buccal side extended from the maxillary tuberosity posteriorly to the mesial of the first premolar (15%), second premolar (41%), and first molar (44%). This inferred that anesthesia was effectively high until the first molars and was less effective further anteriorly due to nerve innervation. The depth of anesthesia on the palatal aspect was up to the first molar (33%), second molar (67%), and lateromedially; 6% of the patients received anesthesia only to the alveolar region, whereas 66% received up to 1.5 cm to the mid-palatal raphe. In 5% of the cases, regional anesthesia was re-administered. An additional 1.8 ml PSANB was required in four patients, and another patient was administered a GPNB in addition to the PSANB during the time of extraction and elevation. Conclusion: The results of our study emphasize that PSANB alone is sufficient for the extraction of MTM in most cases, thereby obviating the need for poorly tolerated palatal injections.

• 대한소아치과학회지
• /
• 제50권4호
• /
• pp.469-482
• /
• 2023

This study aimed to investigate the treatment options for the delayed eruption of mandibular premolars and identify the predictors of spontaneous eruption using panoramic radiography. The prevalence of delayed mandibular premolar eruption in this retrospective analysis, comprising 254 patients (aged 9 - 15 years), was 5.19%, with no significant difference based on gender. The mandibular second premolars were most affected (4.39%) compared to the first premolars (0.76%). No significant difference in prevalence was observed between the left and right sides. Among the treated mandibular premolars, primary molar-related lesions were identified as the leading cause (7.85%) of delayed tooth eruption. The treatment duration varied based on the Nolla stage, eruption stage, and treatment method. Teeth with Nolla stage 7 or lower had a treatment duration of 22.89 ± 11.96 months, whereas those with stage 8 or higher had a 15.02 ± 6.34 month duration. The deeper the tooth was located in the bone, the longer the treatment period became. The treatment duration varied depending on the treatment method, and statistically, there was no significant difference. The treatment durations for affected mandibular premolars increased with the depth of impaction angle of inclination. In this study, the treatment duration for delayed eruptions varied depending on the Nolla stage, eruption stage, and treatment method. Variations in the impaction depth and inclination angle across various treatment approaches, as explored in this study, might offer valuable insights into the selection of the most suitable management options for delayed tooth eruptions.

• Restorative Dentistry and Endodontics
• /
• 제49권1호
• /
• pp.2.1-2.12
• /
• 2024

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

• 대한소아치과학회지
• /
• 제51권1호
• /
• pp.99-108
• /
• 2024

Early loss of the primary maxillary second molar can lead to complications in which mesial drift of the adjacent first molar (M1) can disturb eruption of the succedaneous second premolar (P2). This study reports two cases of space loss for P2 caused by early exfoliation of its predecessor. After the eruption of the first premolar, the Jones jig appliance was used to distalize M1 and regain space for the eruption of P2. The appliance was further utilized to align the palatally erupted P2 into the dental arch. In both cases, the space and corrected position of P2 were well maintained. Early exfoliation of the primary second molar caused by mesial encroachment of M1 is a common phenomenon, and pediatric dentists should attend to this during routine examinations. An appropriate intervention should be initiated when the primary second molar is lost during the mixed dentition period. If used with careful anchorage control, the Jones jig appliance can effectively resolve this problem.

• Imaging Science in Dentistry
• /
• 제54권2호
• /
• pp.171-180
• /
• 2024

Purpose: This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate the detectability of the identified bone defects on panoramic images. Materials and Methods: The study population included 114 patients with a total of 367 implant fixtures. CBCT images were used to assess the presence or absence of bone defects around each implant fixture at the mesial, distal, buccal, and lingual sites. Based on the number of defect sites, the presentations of the peri-implant bone defects were categorized into 3 patterns: 1 site, 2 or 3 sites, and circumferential bone defects. Two observers independently evaluated the presence or absence of bone defects on panoramic images. The bone defect detection rate on these images was evaluated using receiver operating characteristic analysis. Results: Of the 367 implants studied, 167 (45.5%) had at least 1 site with a confirmed bone defect. The most common type of defect was circumferential, affecting 107 of the 167 implants(64.1%). Implants were most frequently placed in the mandibular molar region. The prevalence of bone defects was greatest in the maxillary premolar and mandibular molar regions. The highest kappa value was associated with the mandibular premolar region. Conclusion: The typical bone defect pattern observed was a circumferential defect surrounding the implant. The detection rate was generally higher in the molar region than in the anterior region. However, the capacity to detect partial bone defects using panoramic imaging was determined to be poor.