• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.66-71
• /
• 1976

The purpose of this investigation was to evaluate the mouth preparation and design of removable partial dentures. A total of 187cases for the prefabricated partial denture frameworks in both maxillary and mandibular semi-dentulous situations (66 cases and 203 cases) was selected from this study. The evaluations of mouth preparation and design observed here involved the classification of edentulous spaces, status of abutment splinting with location, design of direct retainer and structure of maxillary major connector according to the incidence of both dental arches, ages, sexes and segment of semidentulousness. The analyzed results were as follows: 1) The order of frequency rate in removable partial denture construction was Class II (50.27%), Class I (36. 90%), Class III (10.69%), and Class IV (2.14 %). 2) The distribution on design of maxillary removable partial denture prosthesis was 33.22% and 64.11% in mandibular removable partial denture prosthesis. 3) The age distribution of removable partial denture prosthesis was prominent after40 years (41.71%). 4) The design pattern of maxillary major connectors was in order of anteroposterior bar, single palatal bar, palatal strap, U-shape connector. 5) The design pattern of direct retainer was in order of Aker's clasp, I-bar clasp, backaction clasp, cuspid universal clasp. 6) The abutment for partial denture clasp splinted between premolar and premolar and its frequency rate revealed 53.44%. 7) It seemed that the location and design of the indirect retainer showed accepatble limit.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• 치과방사선
• /
• 제3권1호
• /
• pp.7-18
• /
• 1973

The authors have taken the x-ray films of carpal bone and orthopantomographs in Korean children to research the degree of ossification of carpal bone, that of calcification of tooth in jaw bone, the eruption rate of tooth, and the completion rate of apical foramen, and have compared the bone age and tooth age. We have gained a series of intersting conclusions to dare to report. 1. The ossification of carpal bone and the growth of tooth had processed proportionally to each other. 2. Both the bone age and tooth age were earlier in the female than in the male. 3. The completion of tooth crown formation and that of tooth root formation had processed proportionally to each other, and the general tendency of process was the earliest in the mandibular first molar and the latest in the second molar. 4. The eruption of tooth was the earliest in the mandibular first molar. The other teeth had erupted in the following orders: the central incisor, the lateral incisor, the first premolar, the second premolar, the canine and the second molar.

• Imaging Science in Dentistry
• /
• 제30권1호
• /
• pp.16-22
• /
• 2000

Purpose : To evaluate the bone densities measured on copper-equivalent image of cross sectional view of mandibular edentulous premolar area obtained by multifuctional panoramic x-ray machine, PM 2002 CC with transversal slicing system. Materials and Methods: Panoramic cross sectional views with 8 mm focal layer of aluminum step and blocks, of hydroxyapatite (RA) step, 6 HA blocks and copper step wedge having 0.03 mm thickness of each step, and of 3 bone blocks cutted by 8 mm thickness mesiodistally and a dry mandible with copper step wedge were taken by using transversal slicing system in PM 2002 Cc. All reference-equivalent images were made and analyzed by NIH image program. Results: The average copper-equivalent value of cancellous bone of bone blocks on the panoramic cross sectional view was 0.026 ± 0.020 mm Cu. The calculated average bone density was 0.38g/cm². There was no significant difference (P>0.1) between the bone densities on intraoral digital view and on the panoramic digital cross sectional view. Conclusion: The copper-equivalent image of panoramic digital cross sectional view obtained by PM 2002 CC with very thin copper step wedge was supposed to be useful to measure the bone density of cancellous bone of mandible at the premolar edentulous area.

• Imaging Science in Dentistry
• /
• 제43권3호
• /
• pp.201-207
• /
• 2013

A 40-year-old man suffered from a repeatedly recurrent desmoplastic ameloblastoma in the right maxillary anterior and premolar regions. During the first visit, the patient was provisionally histopathologically diagnosed with a developmental cyst, and it was confirmed to be unicystic ameloblastoma and resected. Four years later, the lesion recurred, and was diagnosed as a desmoplastic type of ameloblastoma and removed again. Then, 5 years after the second surgery, the lesion recurred again, and was diagnosed as a type containing a follicular pattern, recurrent ameloblastoma. A panoramic radiograph showed a multilocular and mixed radiolucent/radiopaque expansile lesion at the first visit, a unilocular cystic lesion confined to the premolar area at the second visit, and a small soap bubble appearance in the molar area in the final visit. Cone-beam computed tomographic images of the final recurrence of the tumor revealed multiple small cyst-like structures in the right maxillary anterior and posterior regions.

• 대한치과마취과학회지
• /
• 제13권2호
• /
• pp.39-44
• /
• 2013

Most of the dental treatments have been routinely performed under the local anesthesia and the effectiveness has also been proved safe. However, even not frequently dentists face some complications associated with the local anesthesia. In this report, the experience of the paresthesia after mental nerve block anesthesia for an implant placement of the mandibular premolar was presented to raise awareness of the complications related with local anesthetic procedure and to discuss about the causes, the proper treatments and the preventive approach of the paresthesia.

• 대한치과의사협회지
• /
• 제58권6호
• /
• pp.336-345
• /
• 2020

Peri-apical implant lesion, also known as 'retrograde peri-implantitis' can occur with multifactorial etiological factors. The purpose of this case report is to demonstrate resolution of periapical implant lesion by removal of causative factors and saving implant by regenerative therapy. A 54-year old male patient with mild dull pain around implant on the right mandibular second premolar area due to persistent peri-apical infection of the adjacent first premolar was treated. Extraction of tooth with symptomatic apical periodontitis and regenerative therapy on the buccal fenestration area of the implant and extraction site were performed. After 6-month reentry, notable regenerated bone tissue around implant was found, and implant placement on the previous extraction site was performed. After 14-month follow-up from the regenerative therapy, neither biological nor mechanical complication could be found around the implant, evidenced by high implant stability, normal clinical probing depth, and absence of discomfort spontaneously and during masticatory function. In conclusion, surgical intervention including regenerative therapy using bone graft and barrier membrane on periapical implant lesion can be suggested as one of the treatment options considering the extent of periapical lesion.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.87-94
• /
• 2010

When occlusal force is applied to a tooth, stress concentration occurs on the dental cervical line. This study investigated to find the maximum force and strain of natural teeth using an Instron and strain gauges, comparing the strain of cervical enamel using finite element analysis(FEA). Tests were conducted with a mandibular first premolar applying the conditions of occlusion. Then, the FEA was processed with the same as conditions of the fracture test. The test showed that the maximum force, maximum compressive strain and maximum tensional strain was $278{\pm}26$ N, $0.668{\times}10^{-3}{\pm}0.678{\times}10^{-3}$ and $0.248{\times}10^{-3}{\pm}0.102{\times}10^{-3}$, respectively. It was found that six of eight measured strains were within the range of estimated strains by the FEA. Even though it was assumed that properties of FE models were isotropic, it could prove useful as a reference in understanding the tendency of dental strain.

• 대한소아치과학회지
• /
• 제7권1호
• /
• pp.85-93
• /
• 1980

This study was undertaken in order to observe the prevalence of congenital dental anomalies especially that of oligodontia and supernumerary teeth in 1024 children at age from 4 to 14 years, through history taking, oral examinations, roentgenographic observations of subjects, and statistic analysis was made. The following results were obtained: 1. The prevalence of oligodontia in 1024 children was $6.45{\pm}.8$ percent with a total of 122 teeth absent in sixty-six subjects, excluding 3rd molars, and most of children (86.4%) who have congenitally missing teeth showed abscence of one or two teeth individually. 2. The teeth most frequently absent were the mandibular second premolar, maxillary second premolar, maxillary lateral incisor, mandibular central incisor, and mandibular lateral incisor in order. 3. There was no statistically significant difference found in tooth abscence in the following comparisons; .Male vs Female .Bilateral vs Unilateral .Maxilla vs Mandible .Right vs Left 4. The prevalence of supernumerary teeth in 1024 children was $4.79{\pm}.67$ percent with a total of 59 supernumerary teeth in forty-nine subjects, all of children who have supernumerary teeth showed one or two supernumerary teeth individually. 5. Statistically significant difference was found in supernumerary teeth in the comparison of male vs female, and they were more frequent in male.

• 한국환경과학회지
• /
• 제26권4호
• /
• pp.529-533
• /
• 2017

Sightings of long-tailed bats have only been recorded twice in Korea, and their morphology and ecology are virtually unknown. We captured a female long-tailed bat in May 2016, in Gangwon Province, and to the best of our knowledge, this has been done for the first time in approximately 30 years. The captured bat had a very small craniofacial area and the length of its tibia was > 19 mm. The wing membrane penetrated the distal portion of the metatarsus of its first toe. The fur of the bat had a lusterless yellowish-brown color and its terminal tail vertebra was free beyond the posterior edge of the uropatagium. It had an obvious lambdoid crest on the lateral side. The anterior and central premolars were located inward with respect to the tooth row. In the mandible, the central premolar was located slightly inward and was nearly 80% of the anterior premolar in height.