• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.178-188
• /
• 2007

In this paper, a half-scaled substructure test was performed to evaluate the buckling and structural safety of an existing transmission tower subjected to wind load. A loading scheme was devised to reproduce the dead and wind loads of a prototype transmission tower, which uses a triangular jig that is mounted on the reduced model to which the similarity law of a half length was applied. As a result of the preliminary numerical analysis carried out to evaluate the stability of a specimen for the design load, it was confirmed that the calculated axial forces of tower leg members were distributed to $80{\sim}90%$ of an admissible buckling load. When the substructured transmission tower was loaded by 270% of its maximum admissible buckling load, it was failed due to the local buckling that is occurred in joints with weak constraints for out-of-plane behavior of leg members. By inspection of load-displacement curves, displacements and strains of members, it is considered that this local buckling was due to additional eccentric force by unbalanced deformation because the time that is reached to yielding stress due to the bending moment is different at each point of a same section.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.339-345
• /
• 2014

PURPOSE: This study is to investigate the effect of 4 weeks of gym ball exercise on the pelvis and spine of women in 20s. METHODS: Randomly selected 10 of 20 subjects are allocated to experimental group who will practice gym-ball exercise while the rest 10 subjects are allocated to control group. Values for pelvic obliquity DL-DR, pelvic torsion DL-DR, pelvic rotation, kyphotic angle ICT-ITL (max), and lordotic angle ITL-ILS (max) were measured through recording using 3-dimensional image analyzer as a preliminary inspection. Gym-ball exercise was implemented 3 sessions a week for 4 weeks. Each session consisted of 10 minutes of warm up exercise, 30 minutes of main exercise, and 10 minutes of cool down exercise totaling 50 minutes. Post inspections were measured after exercise. RESULTS: Experimental group showed statistically significant difference in pelvic obliquity DL-DR, pelvic torsion DL-DR, and kyphotic angle ICT-ITL (max) (p<.05) and values of pelvic obliquity DL-DR showed statistically significant difference between two groups (p<.05). However pelvic rotation, lordotic angle ITL-ILS (max) did not show a significant difference. CONCLUSION: These results showed that gym-ball exercise has positive effect in the pelvic obliquity, torsion and spine kyphotic angle and expected to have positive effect on the body balance, body lineup, and coordination.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.2
• /
• pp.53-64
• /
• 2008

This study is the architectural planning of 5 distribution supporting facilities for traditional herbal medicine cultivated in the rural areas. The main function of the facility consists of storage, pre-treatment/processing, loading/unloading and the assistant function consists of inspection, office, exhibition/sale, technical equipment etc. The planning shows the modular plan and the section plan of the storage space reflecting the shape and size of storage container, the action radius of carrier and the possibilities of space lease. The total floor area of the storage is 3,192$m^2$ consisting of 27 space. The total floor area of the pre-treatment/processing is 1,488$m^2$ consisting of 7 space. The total floor area of the loading/unloading is 329$m^2$ consisting of 4 space. The total floor area of each facility storage is 8,284$m^2$ including of public space 2,170$m^2$. Also this planning shows the preliminary design, "fundamental model design" for 5 rural government BTL project. Therefore, this result of planning will be the guidelines of the RFP(Request For Proposal) for the private sector company interested in this BTL project.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.446-455
• /
• 1997

A Combined extrusion operation consists of forward and backward extrusion forming and it is possible to make the process be simple by employing it. But the metal flow pattern induced by the operation is hard to analyze accurately because the flows are non-steady, which have at least two directions dependent upon each other. So engineers in the industrial factories had conducted the two extrusion operations separately. A new process was designed by the industrial expert for forming of an alu-minum preform using the combined extrusion operation. In this study, experiments and finite element analysis was carried out to determine the process parameters. Through the preliminary experiment, it was shown that warm forming condition was more desirable than cold or hot ones. And optimal shape of initial billet could be also determined. From the compatibility test, bonde-lube was chosen as the optimal lubricant and 20$0^{\circ}C$ as the material temperature by the inspection of micro-structure. The operation was simulated by the rigid-plastic finite element method to examine the metal flow. Disap-pearing of dead metal zone was observed as the punch fell down and desirable shape was obtained from the one operation. As a result of this study, 7 operations could be reduced and 225% of material saved.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.403-406
• /
• 2006

A new medical X-ray PIV technique was developed using a conventional medical X-ray tube. To acquire images of micro-scale particles, the X-ray PIV system consists of an x-ray CCD camera with high spatial resolution, and a X-ray tube with small a focal spot. A new X-ray exposure control device was developed using a rotating disc shutter to make double pulses which are essential for PIV application. Synchronization methodology was also developed to apply the PIV technique to a conventional medical X-ray tube. In order to check the performance and usefulness of the developed X-ray PIV technique, it was applied to a glycerin flow in an opaque silicon tube. Tungsten particles which have high X-ray absorption coefficient were used as tracer particles. Through this preliminary test, the spatial resolution was found to be higher than ultrafast MRI techniques, and the temporal resolution was higher than conventional X-ray PIV techniques. By improving its performance further and developing more suitable tracers, this medical X-ray PIV technique will have strong potential in the fields of medical imaging or nondestructive inspection as well as diagnosis of practical thermo-fluid flows.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.144-145
• /
• 2017

최근 전자 기기의 크기가 줄어들고 PCB의 사이즈와 반도체 패키지의 크기가 소형화되어 플립 칩 본딩(Flip chip bonding) 기술을 적용한 반도체 패키지 방식이 점점 늘어나고 있다. 이에 따라 PCB와 반도체 칩 사이를 연결하기 위해 응용되던 BGA(Ball Grid Array)에 핀 배열 대신 사용되는 범프(Bump)를 50um 이내의 초미세 범프로 만들어 일정한 배열을 유지하는 것이 중요하다. 또한 초미세 범프의 모양과 품질이 패키지 수율과 밀접하게 연관되기 때문에 이를 검사할 수 있는 기술이 필수적이다. 이에 본 논문은 초미세 범프측정을 할 수 있는 시스템 개발을 위한 측정 대상의 특징과 사용할 수 있는 광학계를 분석하였고, 획득된 영상을 가지고 딥러닝을 적용하여 정확하게 불량여부를 판별할 수 있는 초미세 범프 측정 시스템을 고안하였다.

• Journal of Aerospace System Engineering
• /
• v.6 no.3
• /
• pp.7-12
• /
• 2012

The contents of aircraft system safety assessment vary depending on factors such as the complexity of the system, how critical the system is to flight safety, what volume of experience is available on the type of system and the novelty and complexity of the technologies being used. If the system safety assessment is to substantiate that the developed products are 'safe enough' to be taken into use, then the system safety assessment should be planned and managed to provide the necessary assurance that all relevant hazards and failure conditions have been identified and that all significant combinations of hazards and failures which could cause those conditions have been considered. The assessment must assist the designer and management in making decisions. It must make clear what the critical features of each system are and upon which special manufacturing techniques, inspection, testing, crew drills and maintenance practice they are critically dependent. This paper has prepared to study on promoting the efficiency of aircraft system safety assessment and to present how to compile system safety assessment strategy.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.3
• /
• pp.407-414
• /
• 2020

Thermal decomposition of the uranyl phosphate mineral phase meta-ankoleite (KUO₂PO₄·3H₂O) has been considered in relation to high temperature thermal sintering for the immobilisation of a uranyl phosphate containing waste. Meta-ankoleite thermal decomposition was studied across the temperature range 25 - 1200℃ under an inert N₂ atmosphere at 1 atm. It is shown that the meta-ankoleite mineral phase undergoes a double de-hydration event at 56.90 and 125.85℃. Subsequently, synthetically produced pure meta-ankoleite remains stable until at least 1150℃ exhibiting no apparent phase changes. In contrast, when present in a mixed waste the meta-ankoleite phase is not identifiable after thermal treatment indicating incorporation within the bulk waste either as an amorphous phase and/or as uranium oxide. Visual inspection of the waste post thermal treatment showed evidence of self-sintering owing to the presence of glass former materials, namely, silica (SiO₂) and antimony(V) oxide (Sb₂O₅). Therefore, incorporation of the uranium phase into the waste as part of waste sentencing and immobilisation via high temperature sintering for the purpose of long-term disposal is deemed feasible.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.42.1-42.1
• /
• 2013

In the LCDM paradigm, hierarchical merging is thought to play a key role in the formation and evolution of massive galaxies. Theoretical and observational studies suggest that massive galaxies started forming at high redshifts and were assembled via numerous mergers. Galaxy clusters are the sites where the most massive galaxies are found and the most dramatic merger histories are embedded. The previous work of Sheen et al. (2012) identified via visual inspection many massive galaxies with merger features in clusters, which surprised the community. In this study we aim to quantify peculiarity of galaxies to pin down the merger frequency in cluster environments more objectively. We have performed optical deep imaging of 4 Abell clusters by using IMACS f/2 on a Magellan Badde 6.5-m telescope. For the galaxies in our data, we applied GALFIT algorithm, which fits analytic models to galaxy data, and we analyzed their residuals. We present the preliminary results of our sample galaxies.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.174-182
• /
• 2006

This study is focused on interior materials and wastes among other diverse environmental strategies for sustainable construction. The case study was carried out by using MSDG, mainly utilized in evaluating performance of sustainable constructions in Minnesota, the US, as an evaluation tool, in order to analyze American practices. In this study, a field inspection was conducted to 6 Minnesota cases, following a preliminary examination through literature study and portal site search, and then, constructive reports, interviews with people in charge, and empirical data including photos were added to the basic data provided by MSDG and MOEA As a result, it turned out *that sustainable materials were mainly used even in newly constructed buildings and wastes were properly managed in an environment-friendly, economical, and ethical manner, *that life cycle assessment showed reduction in some constructive costs even when the basic costs were high, *that some recycled finish materials were widely used in diverse areas, *that minimum consumption of raw materials, minimum environmental damage by materials, minimum effect of materials on IAQ were found in the examined cases, and *that many attempts were made to minimize resource consumption and constructive wastes from diverse perspectives.