• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.332-334
• /
• 1995

In this paper, structual, optical properties of CdTe thin films and photovoltaic properties of thin film CdS/CdTe solar cell prepared by thermal vacuum evaporation were studied. The crystal structure of CdTe films was zircblend type with preferential orientation of the (111)plane parallel to the substrate. The heat treatment appears to stabilize this structure. The result of optical absorption and transmittance show that solar radiation with energy larger than bandgap is almost completely absorbed within an about $2{\mu}m$ thickness of the evaporated CdTe layer and transmittance of the CdTe film was larger with increasing annealing temperature. It was found that CdS/CdTe solar cell characteristics were improved by the heat treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.399-399
• /
• 2011

We studied the structural and optical characterization of zinc sulfide (ZnS) thin films by RF magnetron sputtering on glass substrates. The substrate temperature was varied in the range of 100$^{\circ}C$ to 400$^{\circ}C$. The XRD analyses indicated that ZnS films had cubic structures with (111) preferential orientation and grain size varied from 20 to 60 nm, increasing with substrate temperatures. The optical properties were carried out by UV-visible spectrophotometer. Transmission measurement showed that the films had more than 70% transmittance in the wavelength larger than 400 nm, and the absorption edge shifted to shorter wavelength with the increase of substrate temperatures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.65-66
• /
• 2000

Various fluoride films on a glass substrate were prepared and characterized to provide a seed layer for crystalline Si film growth. The XRD analysis on $CaF_2/glass$ illustrated (220) preferential orientation and showed lattice mismatch less than 5 % with Si. We achieved a fluoride film with breakdown electric field of 1.27 MV/cm, leakage current density about $10^{-6}$ $A/cm^2$, and relative dielectric constant less than 5.6. This paper demonstrates microcrystalline silicon $({\mu}c-Si)$ film growth by using a $CaF_2/glass$ substrate. The ${\mu}c-Si$ films exhibited crystallization in (111) and (220) planes, grain size of $700\;{\AA}$, crystalline volume fraction over 65 %, dark- and photo-conductivity ratio of 124, activation energy of 0.49 eV, and dark conductivity less than $4{\times}10^{-7}$ S/cm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.652-657
• /
• 1998

We have performed spin-spray ferrite plating of $Fe{_3}{-X}-Ni_XO_4$(X=0.17~0.26) films in the temperature region $T=80~95[^{\circ}C]$. A reaction solution and an oxidizing solution were supplied to a reaction chamber by supply pump. The solubility limit of Ni increases as the substrate temperature increase, from X=0.17 at $80[^{\circ}C]$ to X=0.26 at $95[^{\circ}C]$. All the films are polycrystalline with no preferential orientation, and the magnetization exhibits no definite anisotropy. Grain size in the films increases as X increases, reaching $0.87[\mu{m}]$ at X=0.26.

• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.263-273
• /
• 2015

Carbon nanotube strain sensors, or so called "fuzzy fiber" sensors have not yet been studied sufficiently. These sensors are composed of a bundle of fiberglass fibers coated with CNT through a thermal chemical vapor deposition process. The characteristics of these fuzzy fiber sensors differ from a conventional nanocomposite in that the CNTs are anchored to a substrate fiber and the CNTs have a preferential orientation due to this bonding to the substrate fiber. A numerical model was constructed to predict the strain response of a composite with embedded fuzzy fiber sensors in order to compare result with the experimental results obtained in an earlier study. A comparison of the numerical and experimental responses was conducted based on this work. The longitudinal sensor output from the model matches nearly perfectly with the experimental results. The transverse and off-axis tests follow the correct trends; however the magnitude of the output does not match well with the experimental data. An explanation of the disparity is proposed based on microstructural interactions between individual nanotubes within the sensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.450-453
• /
• 2020

In this study, ZnO:Ga thin films were fabricated on a glass substrate using various Ar flows by an RF magnetron sputter system at room temperature. The dependencies of Ar flow on different properties were investigated. An appropriate control over the Ar flow led to the formation of a high-quality thin film. The ZnO:Ga films were formed as a hexagonal wurtzite structure with high (002) preferential orientation. The films exhibited a typical columnar microstructure and a smooth top face. The average transmittance was 85~89% within the visible area. By decreasing the Ar flow, the sheet resistance was decreased due to an increase in the grain size and a decrease in the root mean square roughness. The lowest sheet resistance of 86 Ω/□ was obtained at room temperature for the 40 sccm Ar flow.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.343-347
• /
• 2007

Fe thin films exhibited (100) preferential orientation when they were deposited at low deposition rate of $0.1{\AA}/s$ on glass substrates by using facing target sputtering system. The (100) oriented Fe layer induces (100) orientation of Pt layer deposited on it owing to hetero-epitaxial growth. After annealing at $600^{\circ}C$ in $H_2$ atmosphere, FePt films exhibited f.c.t. (001) texture in the whole film caused by inter-diffusion between atoms. We have also confirmed that the homogeneously inter-diffused compositional modulation in the film after the annealing process. Furthermore, annealing process in $Ar+H_2$ atmosphere at $400^{\circ}C$ during Pt deposition was effective for attaining Pt (100) texture. The annealing process during Pt deposition also induced in low annealing temperature and decreased annealing time for attaining the FePt f.c.t. (001) structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.248-248
• /
• 2009

Recently, the control of size, morphology and dimensionality in inorganic materials has been rapidly developed into a promising field in materials chemistry. 3D nanostructured flower-like ZnO architecture with different size and shapes have been simply synthesized via a hydrothermal process, using zinc acetate and ammonium hydroxide as reactants.[1] In this study, the Zno thin-films were deposited by RF magnetron sputtering in other to get high adhesion and uniformity of 3D nanostructured flower-like ZnO architecture on a $SiO_2$ substrate. The XRD patterns identified that the obtained the nanocrystallized ZnO architecture exhibited a wurtzite structure. SEM images illustrated that the flower-like ZnO bundles consisted of flower-like or chestnut bur, which were characterized by polycrystalline and [0001] preferential orientation.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2005.04a
• /
• pp.5-14
• /
• 2005

Recently, data from several groups have raised the concept of 'checkpoint' in transcription. As capping of nascent RNA transcript is tightly coupled to RNA polymerase II transcription, we seek to obtain direct evidence that transcripiton checkpoint via capping enzyme functions in this early regulatory step. One of temperature sensitive (ts) alleles of ceg1, a guanylyltransferase subunit of the Saccharomyces cerevisiaecapping enzyme, showed 6-azauracil (6AU) sensitivity at the permissive growth temperature, which is a phenotype that is correlated with a transcription elongational defect. This ts allele, ceg1-63 also has an impaired ability to induce PUR5 in response to a 6AU treatment. However, this cellular and molecular defect is not due to the preferential degradation of the transcript attributed from a lack of guanylyltransferase activity. On the contrary, the data suggests that the guanylyltransferase subunit of the capping enzyme plays a role in transcription elongation. First, in addition to the 6AU sensitivity, ceg1-63is synthetically lethal with elongation defective mutations of the largest subunit of RNA polymerase II. Secondly, it exhibited a lower GAL1 mRNA turn-over after glucoseshut off. Third, it decreased the transcription read through a tandem array of promoter proximal pause sites in an orientation dependent manner. Interestingly, this mutant also showed lower pass through a pause site located further downstream of the promoter. Taken together, these results suggest that the capping enzyme plays the role of an early transcription checkpoint possibly in the step of the reversion of repression by stimulating polymerase to escape from the promoter proximal arrest once RNA becomes appropriately capped.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.13.2-13.2
• /
• 2011

뼈의 역학기능을 예측하는 인자(predictive factor) 로서 골밀도(BMD)만으로는 충분하지 않다는 최근의 임상결과는, 골밀도 이외의 새로운 뼈의 강도 및 골절리스크를 지배하는 인자의 중요성을 보여준다. 이와 같은 골역학기능에 대한 골밀도 이외의 부가적인 지배인자를 골질(bone quality)이라고 하는데, 다양한 골질관련인자(bone quality-related factor) 중 하나의 지표로서 뼈의 주성분인 생체아파타이트(BAp)의 결정학적 방향성에 주목, 대표적인 경조직 질환을 해석하였다. 파골세포결손에 의해 대리석증을 유발하는 op/op마우스는 골밀도의 변화뿐만 아니라, 골질의 유의한 변화가 있었다. 즉, 이와 같은 결과는 파골세포결손에 의한 조골세포의 활성저하의 의해 골질이 저하됨을 시사하는 결과이며, 파골세포 과잉의 의해 골다공증을 유발하는 OPG-KO마우스는 골밀도가 급격히 저하됨과 동시에, BAp배향성도 급격히 낮아졌다. 즉, 골대사회전의 상승에 따른 섬유성골(woven bone)의 형성에 의해 BAp의 결정성장이 억제되며, 그 결과 BAp배향성이 저하된다고 사료된다. 이상, 본 연구에서는 대표적인 골 질환조직을 각각의 정상골과 비교함으로써, 골양(BMD)의 변화뿐만 아니라 골질(BAp배향성)의 변화를 발견하였다. 이와 같은 변화는 골질지표로서 BAp배향성이 유효하다는 것을 강하게 시사한다. 따라서 본 연구에 의해 얻어진 견해는 경조직 질환의 병리해명에 적용 가능함과 동시에, 경조직 질환의 진단 응용이나 치료약 개발, 임플란트 개발 등 폭넓은 분야에 유용하다고 할 수 있다.