현재(現在) 실무(實務)에 사용(使用)되고 있는 저수지내(貯水池內)에 퇴사량(堆砂量)의 추정방법(推定方法)에 대하여 광범위하게 조사(調査) 비교(比較)하였으며 국내(國內) 113개(個) 관개용(灌漑用) 저수지(貯水池)의 퇴사실측자료(堆砂實測資料)를 사용하여 저수지(貯水池) 퇴사량(堆砂量)과 유역면적(流域面積) 및 저수지(貯水池)의 토사포착효율간(土砂捕捉效率間)의 상관관계(相關關係)를 맺는 다회귀모형(多回歸模型)을 제안(提案)하였다. 제안(提案)된 모형(模型)의 적합성(適合性)을 실측자료(實測資料)로부터 증명하였으며 저수지내(貯水池內)로의 연비유사량(年比流砂量)을 유역면적(流域面積) 및 저수지(貯水池)의 토사포착효율(土砂捕捉效率)과 상관(相關)시켰다. 저수지내(貯水池內)로의 연평균퇴사율(年平均堆砂率)과 연평균저수지내용적(年平均貯水池內容積)의 변동(變動)은 저수지(貯水池)의 토사포착효율(土砂捕捉效率)에 의해 크게 좌우(左右)됨이 증명되었으며 저수지상류(貯水池上流)의 하천유로(河川流路)에 미치는 토사유출(土砂流出)의 영향을 양적(量的)으로 평가(評價)하기 위해서도 본(本) 연구(硏究)에서 제안(提案)된 퇴사량(堆砂量) 추정모형(推定模型)을 적용(適用)할 수 있음을 벽곡저수지(貯水池) 유역(流域)에 대하여 증명(證明)하였다.
어묵의 유통기한을 예측하기 위해서 어묵을 30, 35, $40^{\circ}C$에서 각각 저장하면서 저장기간 중 총 호기성균 수를 측정하였다. Gompertz model을 이용하여 최대성장속도와 유도기를 구하였고, 각 parameter의 온도 의존성에 대한 식을 통해 유통기한에 관한 예측모델 식을 얻었다. 예측모델 식으로부터 계산된 유통기한은 0, 4, $10^{\circ}C$에서 각각 6.9, 5.5, 3.8일이었다. 이렇게 얻어진 예측모델 식의 적합성 평가를 위해 $A_f$와 $B_f$ 값을 산출한 결과, 각각 1.008, 1.003으로 나타나 예측모델식의 적합성이 뛰어났다. 이러한 결과로부터 본 연구에서 얻어진 유통기한예측 모델 식은 어묵의 유통기한 설정의 기초연구로써 활용될 수 있다고 판단된다.
The aim of this research was to develop predictive models for the growth of spoilage bacteria (total viable cells, Pseudomonas spp., and lactic acid bacteria) on frankfurters and to estimate the shelf-life of frankfurters under aerobic conditions at various storage temperatures (5, 15, and $25^{\circ}C$). The primary models were determined using the Baranyi model equation. The secondary models for maximum specific growth rate and lag time as functions of temperature were developed by the polynomial model equation. During 21 d of storage under various temperature conditions, lactic acid bacteria showed the longest lag time and the slowest growth rate among spoilage bacteria. The growth patterns of total viable cells and Pseudomonas spp. were similar each other. These data suggest that Pseudomonas spp. might be the dominant spoilage bacteria on frankfurters. As storage temperature increased, the growth rate of spoilage bacteria also increased and the lag time decreased. Furthermore, the shelf-life of frankfurters decreased from 7.0 to 4.3 and 1.9 (d) under increased temperature conditions. These results indicate that the most significant factor for spoilage bacteria growth is storage temperature. The values of $B_f$, $A_f$, RMSE, and $R^2$ indicate that these models were reliable for identifying the point of microbiological hazard for spoilage bacteria in frankfurters.
훈제연어의 L. monocytogenes에 대한 식중독 안전관리 방안 마련 및 위해평가 수행 등을 위하여 성장예측모텔을 개발하였다. 미생물 성장예측모델 개발 방법은 대상 식품 및 환경 조건에 따라 다양하며 통계적으로 유용한 모델을 사용하여야 하기에 본 연구에서는 미생물 성장예측모델 개발에 널리 사용되어 그 적용성이 검토된 Gompertz model과 Polynomial model equation을 이용하여 훈제연어의 L. monocytogenes 최대성장속도(SGR) 및 유도기(LT)에 관한 예측모텔을 개발하였다. 개발된 모델의 적합성 평가를 위해 $B_f$와 $A_f$ factor를 산출하였고 최대성장속도(SGR)의 경우 0.98, 1.06, 유도기(LT)의 경우 1.60, 1.63으로 나타나 유도기의 적합성이 최대성장속도에 비하여 떨어지는 것으로 확인되었다. 본 연구에서 개발된 훈제연어에서의 L. monocytogenes 성장속도에 관한 모텔은, 수산업, 특히 훈제연어 생산, 가공, 보관 및 판매업에 다양한 방면으로 활용 가능할 것으로 판단되며, 더욱 정확한 예측모텔 개발을 위해서는 다양한 변수에 따른 미생물의 성장패턴 변화 등에 관한 연구가 추가적으로 시행되어야 할 것으로 생각되어 진다.
The primary aim of this study was to investigate the bond strength between reinforcement and concrete. Large sized nine beams, which were produced from concrete with approximately ${f_c}^{\prime}=30$ MPa, were tested. Each beam was designed to include two bars in tension, spliced at the center of the span. The splice length was selected so that bars would fail in bond, splitting the concrete cover in the splice region, before reaching the yield point. In all experiments, the variable used was the reinforcing bar diameter. In the experiments, beam specimens were loaded in positive bending with the splice in a constant moment region. In consequence, as the bar diameter increased, bond strength and ductility reduced but, however, the stiffnesses of the beams (resistance to deflection) increased. Morever, a empirical equation was obtained to calculate the bond strength of reinforcement and this equation was compared with Orangun et al. (1977) and Esfahani and Rangan (1998). There was a good agreement between the values computed from the predictive equation and those computed from equations of Orangun et al. (1977) and Esfahani and Rangan (1998).
The purpose of this study is to establish a predictive equation of transverse residual stress at the thick FCA butt weldment of large container vessel. The variables used were restraint degree, yield strength of base material, thickness of weldment and welding heat input. Restraint degree at the thick weldment of container ship having the various welding sequence was calculated using FEA. From the result, the H-type specimen was designed to reproduce the level of restraint degree at the actual weldment of containership. Based on the results, the predictive equations of the mean value and the distribution of transverse residual stress at each location of the weldment were established using dimensional analysis and multiple-regression method. The predictive equations were verified by comparing with those measured by XRD in the actual weldment of the ship.
The purpose of this study is to establish the predictive equation of transversal residual stress at the thick weldment of large container ship. In order to do it, the variables used for this study were restraint degree, yield strength of base material, thickness of weldment and welding heat input. Here, the level of restraint degree at the thick weldment of container ship having the various welding sequence was calculated using FEA. From the result, the h-type specimen was designed to simulate the level of restraint degree at the actual weldment of containership. With H-type test specimen designed, the effect of the variables on the distribution of transversal residual stress at the weldment in a container ship was evaluated using the comprehensive FEA. Based on the results, the predictive equations of mean value and the distribution of transverse residual stress in each location of residual stress were established using dimensional analysis and multiple-regression method. The validation of predictive equations was verified by comparing with measured results by XRD in the actual weldment of the ship.
To investigate the reinforcing effects of functional fillers in nitrile rubber (NBR) materials, high-structure carbon black (HS45), coated calcium carbonate (C-CaCO3), silica (200MP), and multi-walled carbon nanotubes (MWCNTs) were used as functional filler, and carbon black (SRF) as a common filler were used for oil-resistant rubber. The curing and mechanical properties of HS45-, 200MP-, and MWCNT-filled NBR compounds were improved compared to those of the SRF-filled NBR compound. The reinforcing effect also increased with a decrease in the particle size of the fillers. The C-CaCO3-filled NBR compound exhibited no reinforcing effect with increasing filler concentration because of their large primary particle size (2 ㎛). The reinforcing behavior based on 100% modulus of the functional filler based NBR compounds was compared by using several predictive equation models. The reinforcing behavior of the C-CaCO3-filled NBR compound was in accordance with the Smallwood-Einstein equation whereas the 200MP- and MWCNT-filled NBR compounds fitted well with the modified Guth-Gold (m-Guth-Gold) equation. The SRF- and HS45-filled NBR compounds exhibited reinforcing behavior in accordance with the Guth-Gold and m-Guth-Gold equations, respectively, at a low filler content. However, the values of reinforcement parameter (100Mf/100Mu) of the SRF- and HS45-filled NBR compounds were higher than those determined by the predictive equation model at a high filler content. Because the chains of SRF composed of spherical filler particles are similarly changed to rod-like filler particles embedded in a rubber matrix and the reinforcement parameter rapidly increased with a high content of HS45, the higher-structured filler. The reinforcing effectiveness of the functional fillers was numerically evaluated on the basis of the effectiveness index (SRF/f) determined by the ratio of the volume fraction of the functional filler (f) to that of the SRF filler (SRF) at three unit of reinforcing parameter (100Mf/100Mu). On the basis of their effectiveness index, MWCNT-, 200MP-, and HS45-filled compounds showed higher reinforcing effectiveness of 420%, 70%, and 20% than that of SRF-filled compound, respectively whereas C-CaCO3-filled compound exhibited lower reinforcing effectiveness of -50% than that of SRF-filled compound.
Purpose: The purpose of this study was to identify the effect of predictive factors related to family strength and develop a structural equation model that explains family strength among married working women. Methods: A hypothesized model was developed based on literature reviews and predictors of family strength by Yoo. This constructed model was built of an eight pathway form. Two exogenous variables included in this model were ego-resilience and family support. Three endogenous variables included in this model were functional couple communication, family stress and family strength. Data were collected using a self-report questionnaire from 319 married working women who were 30~40 of age and lived in cities of Chungnam province in Korea. Data were analyzed with PASW/WIN 18.0 and AMOS 18.0 programs. Results: Family support had a positive direct, indirect and total effect on family strength. Family stress had a negative direct, indirect and total effect on family strength. Functional couple communication had a positive direct and total effect on family strength. These predictive variables of family strength explained 61.8% of model. Conclusion: The results of the study show a structural equation model for family strength of married working women and that predicting factors for family strength are family support, family stress, and functional couple communication. To improve family strength of married working women, the results of this study suggest nursing access and mediative programs to improve family support and functional couple communication, and reduce family stress.
The purpose of this study is to construct a flatfish outlook model that is consistent with the "Fisheries outlook" monthly publication of the fisheries outlook center of the Korea Maritime Institute (KMI). In particular, it was designed as a partial equilibrium model limited to flatfish items, but a model was constructed with a dynamic ecological equation model (DEEM) system, considering biological breeding and shipping times. Due to limited amounts of monthly data, the market equilibrium price was calculated using a recursive model method as the inverse demand. The main research results and implications are as follows. As a result of estimating young fish inventory levels, the coefficient of the young fish inventory in the previous period was estimated to be 0.03, which was not statistically significant. Because there is distinct seasonality, when estimating the breeding outcomes, the elasticity of breeding in the previous period was found to exceed 0.7, and it increased more as the weight of the fish increased, in addition, the shipment coefficient gradually increased as the weight increased, which means that as the fish weight increased, the shipment compared to the breeding volume increased. When estimating shipments, the elasticity of breeding in previous period was estimated to respond elastically as the weight increases. The price flexibility coefficient of the total supply was inelastically estimated to be -0.19. Finally, according to a model predictive power test, the Theil U1 was estimated to be very low for all of the predictors, indicating excellent predictive power.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.