• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2063-2066
• /
• 2002

In this paper, we propose a structure far lossless audio coding method. Prediction model is used in the wavelet transform domain. After DWT, wavelet coefficients is quantized and decorrelated by prediction modeling. The DWT can be constructed to critical bands. We can get a lower data rate representation of audio signal which has a good quality like the result of perceptual coding. Then the prediction errors are efficiently coded by the Golomb-coding method. The prediction coefficients are fixed for reducing the computational burden when we find prediction coefficients.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.39-46
• /
• 2003

Productivity and machining performance can be improved by cutting analysis including cutting force prediction, surface error prediction and machining stability evaluation. In order to perform cutting analysis, cutting force coefficients database have to be constructed. Since cutting force coefficients are dependent on cutting condition in the existing research, a large number of calibration tests are needed to obtain cutting force coefficients, which makes it difficult to build the cutting force coefficients database. This paper proposes a generalized method for constructing the cutting force coefficients database us ins cutting-condition-independent coefficients. The tool geometry and workpiece material were considered as important components for database construction. Cutting force coefficients were calculated and analyzed for various helix and rake angles as well as for several workpiece. Furthermore, the variation of cutting force coefficients according to tool wear was analyzed. Tool wear was found to affect tool geometry, which results in the change of cutting force coefficients.

• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.37-43
• /
• 2010

Precise prediction of rotordynamic coefficients for annular type seal of turbomachinery is necessary for enhancing their vibrational stability and various prediction methods have been developed. As the seal passage is designed complicatedly, the analysis based on Bulk-flow concept which has been mainly used in predicting seal dynamics is limited. In order to improve the seal rotordynamic prediction, full Navier-Stokes Equations with turbulent model derived in the seal flow passage have to be solved. In this study, 3D CFD(Computational Fluid Dynamics) analysis has been performed for predicting rotordynamic coefficients of non-contact type annular plain seal using FLUENT. Comparing with the results of Bulk-flow model analysis, the result of 3D CFD analysis shows good agreement.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1E
• /
• pp.13-19
• /
• 1999

This paper introduces an adaptive wavelet transform based on the lifting scheme, which is applied to signal denoising. The wavelet representation using orthogonal wavelet bases has received widespread attention. Recently the lifting scheme has been developed for the construction of biorthogonal wavelets in the spatial domain. Wavelet transforms are performed through three stages: the first stage or Lazy wavelet splits the data into two subsets, even and odd, the second stage calculates the wavelet coefficients (highpass) as the failure to interpolate or predict the odd set using the even, and the third stage updates the even set using neighboring odd points (wavelet coefficients) to compute the scaling function coefficients (lowpass). In this paper, we adaptively find some of the prediction coefficients for better representation of signals and this customizes wavelet transforms to provide an efficient framework for denoising. Special care has been given to the boundaries, where we design a set of different prediction coefficients to reduce the prediction error.

• Tribology and Lubricants
• /
• v.28 no.3
• /
• pp.124-129
• /
• 2012

The prediction of fretting wear is a significant issue for the design of contacting mechanical components such as flexible couplings and splines, jointed structures and so on. In our earlier study, we developed a numerical model to predict the fretting wear using boundary element method. The developed algorithm needs experimental fretting wear coefficients and friction coefficients between two moving materials to get more reliable results. In this study, therefore, we demonstrated the measurement method of the fretting wear coefficients and friction coefficients using disk on plate tribometer with piazo actuator and gap sensor. For four different material combinations, the fretting wear coefficients and friction coefficients are acquired through the fretting wear experiment and the analysis of the measured values. Thess results are useful to predict the quantative fretting wear rate in the developed algorithm.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.4
• /
• pp.114-121
• /
• 1997

In order to provide basic information for the estimation of evapotranspiration in the ponded direct seeding paddy field, both field lysimeter experiment and model prediction were performed to estimate daily ET. Various methods were used to predict daily reference crop ET and crop coefficients. Measure4 mean daily ET during the 1995 growing season varied from 5.9 to 6.1 mm depending on the species, while it varied from 5.1 to 5.5 mm in 1996. Model predicted mean daily ET during the 1995 growing season varied from 3.9 to 4.9 mm depending on the prediction model, while it varied from 3.5 to 4.7 mm in 1996. The smaller ET values both measured and predicted in 1996 were caused by the low values of temperature, sunshine hours, and solar radiation. Crop coefficients varied from 1.20 to 1.50 in 1995 depending on the prediction model, while it varied from 1.10 to 1.47 in 1996. Comparison of the seven reference crop ET prediction methods used in this study shows that the Penman-Monteith method and the FAO-Radiation method gave the lowest ET while the corrected Penman method and the Hargreaves method gave the largest ET. Since crop coefficients vary to a large extent based on the prediction methods, reference crop ET prediction method should be carefully selected in irrigation planning.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.732-742
• /
• 1998

Prediction method for heat transfer coefficients in a horizontal smooth tube with forced convection condensation is proposed. In this paper, the analogy between momentum and heat transfer was applied to an annular flow regime and the logarithmic velocity distribution is applied to describe the velocity profile within the liquid film. Prediction results are compared with those of experimental ones. The test refrigerants are R113, R22, R134a, R407C(R33/R125/R134a, 23/25/52 wt%), R410A(R32/R125, 50/50 wt%) and R134a＋R123(R134a/R123, 85.5/14.5 wt%) which are used under operating conditions in a condenser of air-conditioner. The proposed prediction method shows good agreement with experimental data within$\pm 30%$ for pure refrigerants. For the mixture refrigerants including the ternary mixture refrigerant R407C, condensation heat transfer from this study are higher than those from experiments. By correcting the constant in two-phase frictional multiplier, the predicated heat transfer coefficients become similar to the experimental results.

• Journal of the Korean Data and Information Science Society
• /
• v.11 no.2
• /
• pp.173-179
• /
• 2000

Interval prediction based on the empirical distribution function for the class of time series with time varying coefficients is discussed. To this end, strong mixing property of the model is shown and results due to Fotopoulos et. al.(1994) are employed. A simulation study is presented to assess the accuracy of the proposed interval predictor.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.41-46
• /
• 2006

When new weapons are introduced, the target points estimation is one of the important objectives in the flight test as well as the safe separation. The prediction methods help to design the flight test schedule. However, the incremental aerodynamic coefficients in the aircraft flow field so-called BSE are difficult to predict. Generally, the semiempirical methods such as the grid methods, IFM and Flow TGP using database are used for estimation of BSE. However, these methods are quasi-steady methods using static aerodynamic loads. Nowadays the time-accurate CFD method is often used to predict the store separation event. In the current process, the incremental aerodynamic coefficients in BSE regime are calculated directly, and the elimination of delta coefficients is checked simultaneously. This stage can be used for the initial condition of Flow TGP with freestream database. Two dimensional supersonic and subsonic store separation problems have been simulated and incremental coefficients are calculated. The results show the time when the store gets out of BSE region.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.140-148
• /
• 2016

HEVC(High Efficient Video Coding) has twice times better compression ratio than H.264/AVC, but since the computational complexity has significantly increased in the encoder side, it may cause difficulty in real-time SW implementation in the encoder side. This paper proposes two methods about fast intra prediction. First, fast mode and prediction unit decision method using transform coefficients of the original block is proposed. and second, fast prediction unit decision method using coded block flag(cbf) is proposed. The proposed method achieves 42% encoder speed up with 0.8% bitrate increase compared with HM16.0.