• 제목/요약/키워드: precursors

검색결과 1,447건 처리시간 0.042초

비진공 나노입자 코팅법을 이용한 CIGS 박막 태양전지 제조 (Fabrication of CIGS Thin Film Solar Cell by Non-Vacuum Nanoparticle Deposition Technique)

  • 안세진;김기현;윤경훈
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.222-224
    • /
    • 2006
  • A non-vacuum process for $Cu(In,Ga)Se_2$ (CIGS) thin film solar cells from nanoparticle precursors was described in this work CIGS nanoparticle precursors was prepared by a low temperature colloidal route by reacting the starting materials $(CuI,\;InI_3,\;GaI_3\;and\;Na_2Se)$ in organic solvents, by which fine CIGS nanoparticles of about 20nm in diameter were obtained. The nanoparticle precursors were mixed with organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of CIGS with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents ud to burn the organic binder material. Subsequently, the resultant (porous) CIGS/Mo/glass simple was selenized in a two-zone Rapid Thermal Process (RTP) furnace in order to get a solar ceil applicable dense CIGS absorber layer. Complete solar cell structure was obtained by depositing. The other layers including CdS buffer layer, ZnO window layer and Al electrodes by conventional methods. The resultant solar cell showed a conversion efficiency of 0.5%.

  • PDF

Investigation of Initial Formation of Aluminum Nitride Films by Single Precursor Organometallic Chemical Vapor Deposition of$[Me_{2}Al(\mu-NHR)]_{2}\;(R=^{i}Pr,\;^{t}Bu)$

  • Sung Myung Mo;Jung Hyun Dam;Lee June-Key;Kim Sehun;Park Joon T.;Kim Yunsoo
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권1호
    • /
    • pp.79-83
    • /
    • 1994
  • The organometallic chemical vapor deposition of single precursors, $[Me_2Al({\mu}-NHR)]_2\;(R=^iPr,\;^tBu)$, for alumininum nitride thin films has been investigated to evaluate their poroperties as potential precursors. In chemical vapor deposition processes the gas phase products scattered from a Ni(100) substrate were analyzed by mass spectrometry and the deposited films were characterized by X-ray photoelectron spectroscopy (XPS). The optimum temperatures for the formation of AlN films have been found to be between 700 K and 800 K. Carbon contamination of the films seems to be attributed mainly to the methyl groups bonded to the aluminum atoms. It is apparent that $^tBu$ group is better than $^iPr$ group as a substituent on the nitrogen atom of the single precursors for the AlN thin film formation.

유전 알고리즘과 밀도 범함수 이론을 이용한 Si (001) 표면에서의 SiH4 또는 Al(CH3)3 전구체의 흡착 배위 탐색 (Search for Adsorption Coordination of SiH4 or Al(CH3)3 on Si (001) Surface Using Genetic Algorithm and Density Functional theory)

  • 김현규;김재선;김영철
    • 반도체디스플레이기술학회지
    • /
    • 제20권4호
    • /
    • pp.16-22
    • /
    • 2021
  • We search for an appropriate initial adsorption coordination of precursor on surface by using genetic algorithm (GA) and density functional theory. SiH4 and Al(CH3)3 as precursor, and OH-terminated Si (001) as surface are used for this study. Selection, crossover, and mutation as hyperparameters of GA are applied to search for the adsorption coordination of the precursors on the surface as a function of generation. Bond distances between precursors and the surface are used to explain the adsorption behavior of the precursors.

이온성 액체 촉매를 이용한 Tricyclopentadiene 합성에 관한 연구 (A Study on the Synthesis of Tricyclopentadiene Using Ionic Liquid Catalysts)

  • 김수정;한정식;전종기;임진형
    • 공업화학
    • /
    • 제26권5호
    • /
    • pp.593-597
    • /
    • 2015
  • 차세대 고밀도 연료인 tricyclopentadiene (TCPD)는 dicyclopentadiene (DCPD)를 Diels-Alder 소중합 반응을 통하여 제조하여 왔다. 이에 본 연구에서는 다양한 음이온 전구체와 양이온 전구체의 조합으로 만들어진 이온성 액체 촉매를 이용한 tricyclopentadiene (TCPD) 합성에 관한 연구를 수행하였다. 본 연구에 사용된 2가지 음이온 전구체는 copper(I) chloride (CuCl), iron(III) chloride ($FeCl_3$)이며 양이온 전구체는 triethylamine hydrochloride (TEAC), 1-butyl-3-methylimidazolium chloride (BMIC)이다. 이온성 액체 촉매의 소중합을 통한 TCPD의 제조는 기존 Diels-Alder 반응보다 DCPD의 전환율과 TCPD의 수율 측면에서 우수하였다. 또한, 음이온/양이온 전구체의 조합으로 제조된 이온성 액체 촉매의 산도와 TCPD 수율과의 상관관계가 있었다. 이온성 액체 촉매의 루이스 산도가 낮은 음이온 전구체로 CuCl를 이용하였을 때가 $FeCl_3$를 사용하였을 때보다 TCPD 수율이 좋았다. $FeCl_3$를 음이온 전구체로 하고 양이온 전구체로 BMIC를 사용하여 두 전구체의 몰 비를 조절하여 루이스 산도를 낮추면 TCPD 수율을 증가시킬 수 있었다.

Effects of Carbon Precursors and Hormones on the Lipogenesis and Lipolysis of Hanwoo Cattle Adipose Tissues

  • Lee, S.C.;Lee, H.J.;Kim, D.W.;Park, J.G.;Han, In K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권3호
    • /
    • pp.300-306
    • /
    • 2000
  • This experiment was carried out to determine the contributions of acetate, glucose, amino acids and amino acid metabolites as carbon precursors for the incorporation of radioisotope, in intramuscular and subcutaneous adipose tissue and the effects of insulin on lipogenesis and adrenergic agent, norepinephrine on lipolysis in both tissues. The rate of incorporation of $C^{14}$ labelled acetate, glucose, leucine, isoleucine and ${\alpha}$-ketoisocaproic acid into adipose tissue has been measured in subcutaneous and intramuscular adipose tissues. The rate of incorporation was greater (p<0.05) from acetate than glucose in both subcutaneous and intramuscular adipose tissue and the rate of incorporation of carbon precursors into adipose tissues was greater in subcutaneous than in intramuscular adipose tissues. In comparison of amino acids, the rate was highest (p<0.05) with leucine followed by isoleucine and ${\alpha}$-ketoisocaproic acid in subcutaneous adipose tissue, in which there were no differences. Also, in intramuscular tissue, leucine was highest (p<0.05), and the rate of incorporation decreased in the same order. The rates of carbon precursor incorporation appeared to be higher in subcutaneous than in intramuscular tissue. For incorporation of radio-labelled acetate and glucose into intramuscular adipose tissue. preincubated for 48 hrs with insulin and IGF-1, insulin was the most effective to stimulate the incorporation of precursors in both substrates but there was no difference between insulin and IGF-1 in glucose incorporation. For glyceride-fatty acid synthesis, acetate was significantly (p<0.05) greater than glucose in both subcutaneous and intramuscular adipose tissue, and glyceride-glycerol synthesis was greater (p<0.05) for glucose than acetate in both adipose tissues. The rates of lipogenesis from both precursors were slightly greater in subcutaneous than intramuscular adipose tissue. There was significant (p<0.05) site effect in insulin treatment for glyceride-fatty acid synthesis. But there were no significance in control and norepinephrine. For glyceride-glycerol synthesis, there was no site effect caused by hormonal treatment. Insulin was the most effective (p<0.05) in glyceride fatty acid synthesis, while norepinephrine was the same as control. Compared with control, glyceride-glycerol synthesis from acetate in insulin treatment was significantly (p<0.05) low in subcutaneous, but high in intramuscular tissue. At the same time, in both tissues, it was lower in norepinephrine treatment than in control. Glyceride-glycerol synthesis from glucose was highest (p<0.05) in norepinephrine treatment followed by insulin although there was no significance between insulin and control. Lipolysis was not affected by insulin but was increased by norepinephrine when added to adipose tissue incubations in vitro. Rates of basal lipolysis were greater in subcutaneous adipose tissue than in intramuscular adipose tissue.

The Effects of Mechanical Strain on Bone Cell Proliferation and Recruitment Induced by Osteocytes

  • Ko, Seong-Hee;Lee, Jiy-Hye;Kim, So-Hee
    • International Journal of Oral Biology
    • /
    • 제33권4호
    • /
    • pp.179-186
    • /
    • 2008
  • Several lines of evidence suggest that osteocytes play a critical role in bone remodeling. Both healthy and apoptotic osteocytes can send signals to other bone surface cells such as osteoblasts, osteoclasts, osteoclast precursors, and bone lining cells through canalicular networks. Osteocytes responding to mechanical strain may also send signals to other cells. To determine the role for osteocytes an mechanical strain in bone remodeling, we examined the effects of fluid flow shear stress on osteoclast precursor cell and osteoblast proliferation and recruitment induced by osteocytes. In addition, the effects of fluid flow shear stress on osteocyte M-CSF, RANKL, and OPG mRNA expression were also examined. MLO-Y4 cells were used as an in vitro model for osteocytes, RAW 264.7 cells and MOCP-5 cells as osteoclast precursors, and 2T3 cells as osteoblasts. MLO-Y4 cells conditioned medium (Y4-CM) was collected after 24h culture. For fluid flow experiments, MLO-Y4 cells were exposed to 2h of pulsatile fluid flow (PFF) at 2, 4, 8, $16{\pm}0.6\;dynes/cm^2$ using the Flexcell $Streamer^{TM}$ system. For proliferation assays, MOCP-5, RAW 264.7, and 2T3 cells were cultured with control media or 10-100% Y4 CM. Cells were cultured for 3d, and then cells were counted. RAW 264.7 and 2T3 cell migration was assayed using transwells with control media or 10-100% Y4-CM. M-CSF, RANKL and OPG in MLO-Y4 mRNA expression was determined by semiquantitative RT-PCR. Y4-CM increased osteoclast precursor proliferation and migration, but decreased 2T3 cell proliferation and migration. CM from MLO-Y4 cells exposed to PFF caused decreased RAW 267.4 cell proliferation and migration and 2T3 migration compared to control Y4-CM. However, Y4-CM from cells exposed to PFF had no effect on 2T3 osteoblastic cell proliferation. PFF decreased RNAKL mRNA and increased OPG mRNA in MLO-Y4 cells compared to control(without PFF). PFF had no effect on M-CSF mRNA expression in MLO-Y4 cells. These results suggest that osteocytes can regulate bone remodeling by communication with osteoclast precursors and osteoblasts and that osteocytes can communicate mechanical signals to other cells.