• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.3
• /
• pp.279-289
• /
• 2018

N-nitrosodimethylamine (NDMA) is a class of disinfection byproducts and a frequently detected nitrosamine with carcinogenic potentials. This review summarizes NDMA precursors, their formation mechanisms in chloraminated water, and mitigation strategies. Understanding the formation mechanism and characteristics of precursors is essential for developing a mitigation strategy. Dimethylamine (DMA), the most widely studied NDMA precursor, has an NDMA molar yield up to 3%. In comparison, a subset of tertiary amines, e.g., pharmaceuticals, generate up to 90% upon chloramination. Potent NDMA precursors, are characterized by their negative partial charge, low planarity values and molecular weight, and high bond length and $pK_a$ values. A nucleophilic substitution of tertiary amine on chloramine is a key reason for the high NDMA yield from the most potent NDMA precursors. The distribution and fate of NDMA in surface water, aquifers, and its formation in the distribution system can be mitigated through two strategies: (1) degrading or/removing NDMA after its formation and (2) pre-treatment of its precursor's prior chloramination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2550-2558
• /
• 2013

Poly(o-hydroxyamides)(PHAs) copolymers having oligo(oxy ethylene) pendant in the main chain were synthesized by solution polycondensation reaction at low temperature. Copolymer precursors were studied by fourier transform infrared(FT-IR), differential scanning calorimeter(DSC), thermogravimetric analyzer(TGA), universal testing machine(UTM) and limited oxygen index(LOI). The inherent viscosities of the PHAs measured at $35^{\circ}C$ in DMAc or DMAc/LiCl solution were in the range of 0.74~1.42 dL/g. Solubility of the precursors with higher oligo(oxy ethylene) unit was increased, but the PBOs were nearly insoluble in a variety of solvents. The degradation temperature of the copolymer precursors was recorded in the ranges of $408{\sim}664^{\circ}C$ in nitrogen and char yields showed 13~59% values at $900^{\circ}C$. The mechanical properties and flame retardancy of copolymer precursors decreased with higher oligo(oxy ethylene) unit.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.5
• /
• pp.494-502
• /
• 2011

Coenzyme $Q_{10}$ ($CoQ_{10}$) is a widely used supplement in heart diseases treatment or antioxidative dietary. The microbial production of $CoQ_{10}$ was enhanced by addition of solanesol and novel precursors recovered from waste tobacco. The novel precursors were separated by silica gel and identified as ${\alpha}$-linolenic acid (LNA) and butylated hydroxytoluene (BHT) based on the effect on $CoQ_{10}$ production and GC-MS. The effects of novel precursors on $CoQ_{10}$ production by Sphingomonas sp. ZUTE03 were further evaluated in a two-phase conversion system. The precursor's combination of solanesol (70 mg/l) with BHT (30 mg/l) showed the best effect on the improvement of $CoQ_{10}$ yield. A maximal $CoQ_{10}$ productivity (9.5 mg $l^{-1}$ $h^{-1}$) was achieved after 8 h conversion, with a molar conversion rate of 92.6% and 92.4% on BHT and solanesol, respectively. The novel precursors, BHT and LNA in crude extracts from waste tobacco leaves, might become potential candidates for application in the industrial production of $CoQ_{10}$ by microbes.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.136-142
• /
• 2016

As precursors of cathode materials for lithium ion batteries, $Ni_{1/3}Co_{1/3}Mn_{1/3}(OH)_2$ powders are prepared in a continuously stirred tank reactor via a co-precipitation reaction between aqueous metal sulfates and NaOH in the presence of $NH_4OH$ in air or nitrogen ambient. Calcination of the precursors with $Li_2CO_3$ for 8 h at $1,000^{\circ}C$ in air produces dense spherical cathode materials. The precursors and final powders are characterized by X-ray diffraction (XRD), scanning electron microscopy, particle size analysis, tap density measurement, and thermal gravimetric analysis. The precursor powders obtained in air or nitrogen ambient show XRD patterns identified as $Ni_{1/3}Co_{1/3}Mn_{1/3}(OH)_2$. Regardless of the atmosphere, the final powders exhibit the XRD patterns of $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ (NCM). The precursor powders obtained in air have larger particle size and lower tap density than those obtained in nitrogen ambient. NCM powders show similar tendencies in terms of particle size and tap density. Electrochemical characterization is performed after fabricating a coin cell using NCM as the cathode and Li metal as the anode. The NCM powders from the precursors obtained in air and those from the precursors obtained in nitrogen have similar initial charge/discharge capacities and cycle life. In conclusion, the powders co-precipitated in air can be utilized as precursor materials, replacing those synthesized in the presence of nitrogen injection, which is the usual industrial practice.

• Applied Science and Convergence Technology
• /
• v.25 no.3
• /
• pp.56-60
• /
• 2016

The ALD process is an adequate technique to meet the requirements that come with the downscaling of semiconductor devices. To obtain thin films of the desired standard, it is essential to understand the thermal decomposition properties of the precursors. As such, this study examined the thermal decomposition properties of TEMAHf precursors and its effect on the formation of $HfO_2$ thin films. FT-IR experiments were performed before deposition in order to analyze the thermal decomposition properties of the precursors. The measurements were taken in the range of $135^{\circ}C-350^{\circ}C$. At temperatures higher than $300^{\circ}C$, there was a rapid decrease in the absorption peaks arising from vibration of $Sp^3$ C-H stretching. This showed that the precursors experienced rapid decomposition at around $275^{\circ}C-300^{\circ}C$. $HfO_2$ thin films were successfully deposited by Atomic Layer Deposition (ALD) at $50^{\circ}C$ intervals between $150^{\circ}C$ to $400^{\circ}C$; the deposited films were characterized using a reflectometer, X-ray photoelectron spectroscopy (XPS), Grazing Incidence X-ray Diffraction (GIXRD), and atomic force microscopy (AFM). The results illustrate the relationship between the thermal decomposition temperature of TEMAHf and properties of thin films.

• Rapid Communication in Photoscience
• /
• v.4 no.4
• /
• pp.79-81
• /
• 2015

The influence of the grain size of the $CH_3NH_3PbI_3$ on the solar cell performance is investigated by controlling the ratio between $CH_3NH_3I$ and $PbI_2$ precursors. As the concentration of the precursors increased from 1.0M to 2.0M, the $CH_3NH_3PbI_3$ grain size increased from ~100nm to ~400nm. The solar cell utilizing the $CH_3NH_3PbI_3$ with large grain size shows improved photocurrent compared to the solar cell utilizing $CH_3NH_3PbI_3$ with small grain size, which is ascribed to the reduced recombination at the boundaries of grains.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.142-151
• /
• 1995

Complex alkoxides were synthesized using metal alkoxide method and were then hydrolyzed to prepare the precursors using sol - gel method. Then, the precursors were calcined in order to make barium hexaaluminate. Factors affecting the material properties of the barium hexaaluminate precursors were studied and they are the kinds and amount of alcohols, and reaction time. In addition, in the course of hydrolysis, the effects of the amount of water, reaction temperature and aging time were also studied in terms of the specific surface area and average particle size of the barium hexaaluminates.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1319-1320
• /
• 2006

Several practical applications of melt-textured bulk superconductors require the complex-shaped products such as curved, ring-shaped, and drilled blocks rather than simple shaped pellets. However, melt-textured bulk superconductors are often damaged when they are cut, grinded, or drilled. With the aim of reducing such damages, we have investigated the preparation of the complex-shaped bulk superconductors by previously machining binder-added precursors and pre-sintered precursors. We could produce various complex-shaped bulk superconductors without cracking from these machined precursors

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2776-2782
• /
• 2010

Newly developed Horner-Wadsworth-Emmons (HWE) reagents 5 having triphenylphosphorane ylide subunits readily condensed with various carbonyl compounds under mild reaction conditions to afford $\beta,\gamma$-unsaturated $\alpha$-keto triphenylphorane ylides in good to excellent yields, which were hydrogenated over Pd-C (10%)/$H_2$ (1 atm) to give the corresponding $\alpha$-keto triphenylphorane ylides in quasi-quantitative yields. These triphenyphosphorane ylides have been utilized as the precursors to $\alpha$-keto amide/ester and vicinal tricarbonyl units in Wasserman's synthetic protocols, and have previously been prepared only from carboxylic acids/acid chlorides. Our new approaches provide excellent alternatives for the synthesis of triphenylphosphorane ylide precursors to $\alpha$-keto amide/ester and vicinal tricarbonyl units directly from carbonyl compounds in good to excellent yields.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.891-894
• /
• 2010

Thermal properties of a series of Co $\beta$-diketonates have been systematically investigated and it is found that tris(3,5-heptanedionato) cobalt(III) ($Co(hd)_3$) with the lowest melting point among them can be a better precursor than tris(2,2,6,6-tetramethyl-3,5-heptanedionato cobalt(III) ($Co(tmhd)_3$), one of the most popular precursors to date, under suitable conditions. Isothermal TGA study shows that $Co(hd)_3$ would work better at higher temperature, while $Co(dmhd)_3$ would be a better precursor at lower temperature.