• International Journal of Fluid Machinery and Systems
• /
• 제2권3호
• /
• pp.215-222
• /
• 2009

Jets issuing through small holes in a wall into a freestream has proven effective in the control of flow separation. This technique is known as the vortex generator jet (VGJs) method. If a precursor signal of separation is found, the separation control system using VGJs can be operated just before the onset of separation and the flow field with no separation is always attained. In this study, we measured the flow field and the wall static pressure in a two-dimensional diffuser to find a precursor signal of flow separation. The streamwise velocity measurements were carried out in the separated shear layer and spectral analysis was applied to the velocity fluctuations at some angles with respect to the diffuser. The pattern of peaks in the spectral analysis changes as the divergence angle increases over the angle of which the whole separation occurs. This change in the spectral pattern is related to the enhancement of the growth of shear layer vortices and appears just before the onset of separation. Therefore, the growth of shear layer vortices can be regarded as a precursor signal to flow separation.

• The Plant Pathology Journal
• /
• 제15권6호
• /
• pp.313-318
• /
• 1999

Cloning of the 5'untranslated region (5' UTR) and Nterminus of the glycoprotein precursor (G2G1) open reading frame of tomato spotted wilt virus has been problematic, possibly because of the toxicity of a signal peptide at the beginning of th G2G1 protein precursor. The toxicity of the signal peptide to bacterial growth and the reason for the expression of the peptide gene in Escherichia coli were investigated by cloning the 5' UTR and the signal peptide sequence separately. Cells transformed with the plasmid containing both the first 30 amino acids of the glycoprotein and the 5' UTR showed a severe growth inhibition whereas transformants harboring either the plasmid with the signal sequence or the 5'UTR alone did not show any ingibition. An E. coli promoter-like sequence was found in the 5'UTR and tis promoter acivity was confirmed with a promoter-less GUS gene cloned downstream of the 5'UTR. In the cloning of the Tomato spotted wilt virus (TSWV) glycoprotein G2G1 open reading frame all the recovered plasmids contained stop codons in the signal sequence region. However, clones containing no stop codon were recovered when the signal sequence and the 5'UTR were cloned separately.

• BMB Reports
• /
• 제39권6호
• /
• pp.717-721
• /
• 2006

In vitro analyses of type I signal peptidase activities require protein precursors as substrates. Usually, these pre-proteins are expressed in vitro and cleavage of the signal sequence is followed by SDS polyacrylamide gel electrophoresis coupled with autoradiography. Radioactive amino acids have to be incorporated in the expressed protein, since the amount of the in vitro expressed protein is usually very low and processing of the signal peptide cannot be followed by SDS polyacrylamide gel electrophoresis alone. Here we describe a rapid and simple method to express large amounts of a protein precursor in E. coli. We have analyzed the effect of ionophors as well as of azide on the accumulation of expressed protein precursors. Azide blocks the function of SecA and the ionophors dissipate the electrochemical gradient across the cytoplasmic membrane of E. coli. Addition of azide ions resulted in the formation of inclusion bodies, highly enriched with pre-apo-plastocyanine. Plastocyanine is a soluble copper protein, which can be found in the periplasmic space of cyanobacteria as well as in the thylakoid lumen of cyanobacteria and chloroplasts, and the pre-protein contains a cleavable signal sequence at its N-terminus. After purification of cyanobacterial pre-apo-plastocyanine, its signal sequence can be cleaved off by the E. coli signal peptidase, and protein processing was followed on Coomassie stained SDS polyacrylamide gels. We are optimistic that the presented method can be further developed and applied.

• Journal of Photoscience
• /
• 제7권1호
• /
• pp.9-13
• /
• 2000

An alternately assembled polycation-anionic dye film was prepared on a precursor assembly of poly(allylamine)hydrochloride (PAH) and poly(sodium styrenesulfonate) (PSS) or of poly (djallyldimethyl)ammonium chloride (PDDA) and PSS. The (PAH/PSS) precursor assembly gave better adsorptivity to the anionic dye than the (PDDA/PSS) one. Four kinds of anionic dyes (EB-T, AR-17 AR-18, AR-27) with different numbers of sulfonate substituents were compared. The extent of dye assembling was higher for the dye with a smaller number of sufonate substituents. Second harmonic generation (SHG) was clearly observed from the films. The SHG signal and the absorption intensity correlated well up to four polycation/dye bilayers, while further assembly did not increase the SHG signal appreciably. Second order nonlinear coefficients for ten bilayer assemblies were the order of pm/V.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.30-36
• /
• 2009

This paper aims at the precursor analysis and DB development of electrical fires based on thermal and current signals for partial disconnection and poor contact on electric wires through experiments and simulations. Also, DB system required for developing the precursor DB with these data was studied and designed. Firstly, in case of partial disconnection, characteristics were derived and analyzed by experiment and electrical-thermal finite element method(Flux 3D) on the model wires which consist of VCTF and IV electric wires. Based on the characteristics, About 351 partial disconnection precursor patterns were generated by the thermal analysis for electric wire according to deterioration time under normal state and 200% overload state of rated current. Secondly, in order to develop poor contact precursor patterns, temperature value and the current signal were considered. In simulating the poor contact situation on connector area of MCCB, connection torque was changed. Through the experimental analysis, about 251 poor contact precursor patterns were generated. Finally, Using thermal precursor patterns obtained by partial disconnection and poor contact, electrical fire thermal precursor DB was developed.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.13-18
• /
• 2009

This paper is purposed to develop DAQ H/W, S/W and DB which can be used in developing electrical fire alarm system or in analyzing electrical fire cause, by detecting and monitoring precursor signals which have high possibility leading to electrical fire on electrical distribution wires. In this paper, developed was DAQ H/W adopting the C8051FXXX CPU which can analyze the measurement signals of current and voltage in electrical distribution wires, other CPU was investigated in view of the best digital sampling rate on the basis of previous researches for electrical fire alarm system. Also, the S/W which can interface with DAQ H/W's communication protocol and can be applied for electrical fire causes analysis, are embodied by LabVIEW. The combined DAQ H/W and S/W could analyze efficiently normal as well as abnormal electrical signals such as RMS value, instantaneous value of current and voltage, frequency signals etc, on the electrical wires. Also, DB system was constructed for recording various analysis results for precursor signals including voltage and current signals. The results by simulator and experiment showed that the suggested scheme with DAQ H/W, S/W and DB in this paper has high usability.

• Applied Biological Chemistry
• /
• 제41권8호
• /
• pp.572-577
• /
• 1998

The solution conformation of the human insulin precursor, preproinsulin, is described in terms of NMR spectral data. NMR experiments were performed on preproinsulin, whose structure was compared with the NMR structure of native human insulin. Despite the presence of the C-peptide and/or the signal peptide, secondary structure analyses indicate that the native structures of the A and B chains are well conserved even in preproinsulin. The observed relative robustness of the native structure in precursor forms permits further protein engineering experiments where the C-peptide or N-terminal signal sequence can be altered for the purpose of increasing expression or purification yields when producing recombinant human insulin.

• 한국미생물·생명공학회지
• /
• 제36권4호
• /
• pp.314-319
• /
• 2008

Penicillin G amidase(PGA, benzylpenicillinamidohydrolase, EC 3.5.1.11)는 penicillin G를 phenylacetic acid(PAA)와 6-aminopenicillanic acid(6-APA)로 분해하는 효소이다. Escherichia coli(E. coli) ATCC 11105의 PGA는 24 kDa의 small subunit과 65 kDa의 large subunit으로 구성되어 있고, precursor polypeptide에서 signal peptide와 spacer peptide가 절단되어 활성을 가진 heterodimer가 형성된다. 본 연구에서는 E. coli ATCC 11105에서 PCR(polymerase chain reaction)을 통해 증폭한 pga gene을 expression vector에 넣어 pET-pga plasmid를 제작하였고, 이것을 E. coli BL21 (DE3) 균주에 형질 전환하여 PGA를 발현하고 그 활성을 분석하였다. E. coli BL21(DE3)/pET-pga 균주의 고밀도 배양액을 SDS-PAGE로 분석 했을 때, PGA의 precursor, large subunit, 그리고 small subunit으로 보이는 protein band가 나타났으며, PGA가 soluble form의 precursor로 발현되어 processing을 거쳐서 large subunit과 small subunit으로 절단되기도 하고, 일부는 insoluble form의 precursor로 발현되기도 하는 것으로 생각된다. 유가배양시 온도변화 전략을 사용하여 고농도 배양에서 발현을 유도하였다. 온도변화 전략은 $37^{\circ}C$에서 $28^{\circ}C$를 거쳐 $22^{\circ}C$로 3단계로 변화시켰다. 이러한 전략으로 PGA활성은 19.6 U/mL이며 균체량은 600 nm에서 흡광도가 62까지 도달하였다.

• 공업화학
• /
• 제34권2호
• /
• pp.106-110
• /
• 2023

리그닌(lignin)은 고분자와 혼합될 수 있고 탄화도 가능하므로 효용성이 크다. 본 실험에서는, 탄화에 유리한 고분자인 폴리아크릴로나이트릴(polyacrylonitrile, PAN)과 리그닌을 혼합하여 탄소 전구체(precursor)로 제조하고, 탄화(carbonization)하여 안정한 탄소 필름이 제어된 탄화 과정을 통해 제조되었다. 얻어진 탄화 소재의 형태적, 전기적 특성들이 분석되었으며, 흡착 성능이 실험적으로 제시되었다. 탄소 전구체 복합소재의 형성은 적외선 분광기(Fourier-transform infrared, FT-IR)를 통해 확인하였고, 생성된 탄소 필름의 외형적 특성은 주사전자현미경(scanning electron microscope, SEM)을 이용하여 고찰하였다. 이를 통해 전구체 필름의 구조적 안정성이 탄화 이후에도 유지됨을 확인하였으며, 필름 내부에 존재하는 리그닌의 흔적도 고찰할 수 있었다. 탄소 필름의 미세 구조는 라만(Raman) 분광기를 통해 분석하였으며, 표면적 및 기공 구조는 BET (Brunauer-Emmett-Teller) 법으로 측정하여, 비교적 균일한 기공이 형성됨을 확인하였다. 탄소 시료의 전기적 특성도 고찰하여, 흡착 소재로서 사용 가능함을 확인하였고, 흡착(adsorption) 테스트를 통해 금속 양이온을 효율적으로 제거할 수 있음을 증명하였다. 본 연구는 해당 분야 향후 연구에 중요한 정보를 제공할 것이다.

• 농업생명과학연구
• /
• 제45권6호
• /
• pp.201-212
• /
• 2011

인천 연안의 심하게 오염된 갯벌로부터 강력한 세포외 알카리성 단백질 분해효소를 생산하는 호알카리성 Bacillus clausii I-52를 분리하였으며, 이 균주로부터 알카리성 단백질 분해효소의 유전자를 cloning하여 서열 분석을 하였다. Chromosome 서열이 완전히 밝혀진 Bacillus subtilis의 서열을 기초로 하여 알카리성 단백질 분해효소 및 promoter를 포함하도록 primer를 고안하여 PCR을 수행하여 2,277 bp의 DNA 단편을 얻었으며 BLAST 분석 결과 29 개의 아미노산으로 이루어진 signal peptide, 77 개의 아미노산으로 이루어진 propeptide 및 275 개의 아미노산을 갖는 활성형의 BCAP으로 구성된 총 381 개의 아미노산을 코딩하는 1,143 bp의 open reading frame을 확인하였다. 활성형 BCAP의 N-말단 아미노산은 Ala이며, 분자량 및 pI 값은 각각 27698.7 Da과 6.30으로 계산되었다. 아미노산 상동성을 분석한 결과, B. subtilis 유래의 nattokinase precursor 및 B. subtilis BSn5 유래의 subtilisin E precursor와 99%의 서열 상동성을 나타내어 B. clausii I-52 유래의 BCAP은 subtilisin 계열의 단백질 분해효소임을 확인하였다. E. coli BL21(DE3)에서 발현한 재조합 BCAP는 N-Suc-Ala-Ala-Pro-Phe-pNA 를 효율적으로 분해하였다. Refolding한 재조합 BCAP은 전형적인 serine protease inhibitor인 PMSF에 의하여 강하게 효소 활성이 억제됨으로써 serine protease 계열의 단백질 분해효소임을 알 수 있었다.