• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.42-49
• /
• 2005

Our purpose is to develop a precision magnetic displacement sensor that has sub-micron resolution and small size probe. To achieve this, we first have tried to establish mathematical models of a magnetic sensor in this paper. The inductance model that presents basic measuring principle of a magnetic sensor is based on equivalent magnetic circuit method. Especially we have concentrated on modeling of magnetic flux leakage and magnetic flux fringing. The induced model is verified by experimental results. The model, including the magnetic flux leakage and flux fringing effects, is in good agreement with the experimental data. Subsequently, based on the augmented model, we will design magnetic sensor probe in order to obtain high performances and to scale down the probe.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.371-376
• /
• 1994

This paper presents an on-line modeling method approach for the machine condition. the machine condition is continuously monitored with a sensor such as, a vibration, a current, an acoustic emission (AE) sensor. In this study, neural network modeling by radial basis function is designed for analysis a prediction error. An on-line learning algorithm is designed using the RLS(recursive least square) estimation and the existing clustering method of Kohonen neural network. Experimental results show that the proposed RBNN modeling is suitable for predicting simulated data.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.31-36
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.249-252
• /
• 1997

The resolution of analog sensor is determined by its sensitivity and amplitude of noise. This paper presents modeling of inductive gap sensor base on equivalent magnetic circuit and analysis of sensitivity. The model of inductive gap sensor is verified by the experimental results. Then we can simulate static characteristic of inductive gap sensor using this model. Computer simulation show that sensor's sensitivity and linearity are affected by magnetic flux's leakage and fringing, and that they are affected by shape of sensor probe.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.317-322
• /
• 1994

The design and performance verification of collocated capacitance sensor system for magnetic bearing is presented. Noncollocation between actuators and sensors may cause unstable rotor behavior. The capacitance sensor is not affected by magnetic field. PCB type capacitance sensor is installed between magnetic bearing polse. so, collocation of sensors and actuators can be achieved. Experiment of sensor's static and dynamic charactistics is conducted. Modeling of the rotor system supported by magnetic bearing is made. And performance comparison between simulation and experiment is showed.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1393-1405
• /
• 2020

UAV (Unmanned Aerial Vehicle) can acquire high-resolution images due to low-altitude flight, and it can be photographed at any time. Therefore, the UAV images can be updated at any time in map production. Due to these advantages, studies on the possibility of producing large-scale digital maps using UAV images are actively being conducted. Precise digital maps can be used as base data for digital twins or smart cites. For producing a precise digital map, precise sensor modeling using GCPs (Ground Control Points) must be preceded. In this study, geometric models of UAV images were established through a precision sensor modeling algorithm developed in house. Then, a digital map by stereo plotting was produced to evaluate the possibility of large-scale digital map. For this study, images and GCPs were acquired for Ganseok-dong, Incheon and Yeouido, Seoul. As a result of precision sensor modeling accuracy analysis, high accuracy was confirmed within 3 pixels of the average error of the checkpoints and 4 pixels of the RMSE was confirmed for the two study regions. As a result of the mapping accuracy analysis, it satisfied the 1:1,000 mapping accuracy announced by the NGII (National Geographic information Institute). Therefore, the precision sensor modeling technology suggested the possibility of producing a 1:1,000 large-scale digital map by UAV images.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1463-1467
• /
• 2005

This paper proposes an analytical redundancy technique for fault diagnostics of the sensor in steer-by-wire system. We use incorporating vehicle dynamics modeling into the design of a diagnostic system for steer-by-wire system. The use of a model of vehicle dynamics improves the speed and accuracy of the diagnoses. The proposed fault diagnostics algorithm is based on parity-space methods to generate residuals. To reduce the effects of modeling uncertainty and dynamic transients, the residuals are subject to filtering. We construct diagnostic system consisting residual threshold for detection and isolator with using the directional residual vector.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.43-46
• /
• 2000

Optical triangulation displacement sensors(0TDSs) are widely used for their simple struchlre, high resolution, and long operating range. However, there are several factors that must be taken into account in order to obtain high accuracy and reliability Measurement errors from inclinations a？ an object surface, prohe signal fluctuations generated by speckle effects. power vanation of a light source, electronic noises, and so on. Previous models of OTDSs can not show reasonable behavior as change of surface inclination and shape of light intensity distribution on the detector. In this paper, we propose a new and reasonable modeling for diffise-type OTDSs based on a geometrical optics. To verify propriety of new modeling, we take basic experiments. Shape of light intensity distribution is asymmetric in both simulation result and experimental result. Both simulation result and experimental result show same tendency of light intensity distribution movement as changing surface inclination

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.551-552
• /
• 2013

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.88.3-88
• /
• 2001

In this paper, an on-line multi-sensor visual inspection technique for seamless steel pipe´s straightness is developed. The basic principle of the visual measuring method is detailed. The modeling of visual sensor, measurement system and data processing are presented. In order to test the accuracy of the multi-sensor visual inspection, an experiment inspecting the straightness of a 1500mm long seamless steel pipe is made. The experiment results show that the visual inspection technique can achieve on-line measurement and offers high precision and stability.