• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.501-504
• /
• 2003

A novel prepurification method was developed aiming at increasing yield and purity, also reducing solvent usage for purification of paclitaxel. This method was a simple and efficient procedure, for the isolation and prepurification of paclitaxel from the biomass of Taxus chinensis, consisting of micelle formation, followed by two steps of precipitation. The use of a micelle and precipitation in the prepurification process allows for rapid separation of paclitaxel from interfering compounds and dramatically reduces solvent usage compared to alternative methodologies. This prepurification process serves to minimize the size and complexity of the HPLC operations for paclitaxel purification. This process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. As much as possible, the process has been optimized to minimize solvent usage, complexity, and operating costs.

• Korean Journal of Materials Research
• /
• v.29 no.6
• /
• pp.343-348
• /
• 2019

Structural and mechanical effects of the dynamical precipitation in two copper-base alloys have been investigated over a wide range of deformation temperatures. Basing upon the information gained during the experiment, also some general conclusion may be formulated. A one concerns the nature of dynamic precipitation(DP). Under this term it is commonly understood decomposition of a supersaturated solid solution during plastic straining. The process may, however, proceed in two different ways. It may be a homogeneous one from the point of view of distribution and morphological aspect of particles or it may lead to substantial difference in shape, size and particles distribution. The effect is controlled by the mode of deformation. Hence it seems to be reasonable to distinguish DP during homogeneous deformation from that which takes place in heterogeneously deformed alloy. In the first case the process can be analyzed solely in terms of particle-dislocation-particle interrelation. Much more complex problem we are facing in heterogeneously deforming alloy. Deformation bands and specific arrangement of dislocations in form of pile-ups at grain boundaries generate additional driving force and additional nucleation sites for precipitation. Along with heterogeneous precipitation, there is a homogeneous precipitation in areas between bands of coarse slip which also deform but at much smaller rate. This form of decomposition is responsible for a specially high hardening rate during high temperature straining and for thermally stable product of the decomposition of alloy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.123-123
• /
• 2020

The present study is aimed to correcting radar-based mean areal precipitation forecasts to improve urban flood predictions and uncertainty analysis of water levels contributed at each stage in the process. For this reason, a long short-term memory (LSTM) network is used to reproduce three-hour mean areal precipitation (MAP) forecasts from the quantitative precipitation forecasts (QPFs) of the McGill Algorithm for Precipitation nowcasting by Lagrangian Extrapolation (MAPLE). The Gangnam urban catchment located in Seoul, South Korea, was selected as a case study for the purpose. A database was established based on 24 heavy rainfall events, 22 grid points from the MAPLE system and the observed MAP values estimated from five ground rain gauges of KMA Automatic Weather System. The corrected MAP forecasts were input into the developed coupled 1D/2D model to predict water levels and relevant inundation areas. The results indicate the viability of the proposed framework for generating three-hour MAP forecasts and urban flooding predictions. For the analysis uncertainty contributions of the source related to the process, the Bayesian Markov Chain Monte Carlo (MCMC) using delayed rejection and adaptive metropolis algorithm is applied. For this purpose, the uncertainty contributions of the stages such as QPE input, QPF MAP source LSTM-corrected source, and MAP input and the coupled model is discussed.

• Microbiology and Biotechnology Letters
• /
• v.42 no.1
• /
• pp.25-31
• /
• 2014

Fractional precipitation is a simple method for purifying (+)-dihydromyricetin extracted from biomass. However, the fractional precipitation process has been inherently problematic due to the lengthy precipitation time that is required. The fractional precipitation time was shortened and (+)-dihydromyricetin yield was improved by increasing the surface area per working volume (S/V) of the reacting solution through the addition of a cation exchange resin (Amberlite 200, Amberlite IR 120Na, Amberlite IR 120H, or Amberlite IRC 50). Most of the (+)-dihydromyricetin (>90%) could be obtained after about 16 h of fractional precipitation using Amberlite 200. Since high-purity (+)-dihydromyricetin can be obtained at a high yield and the precipitation time can be reduced by increasing the surface area available for precipitation, this improved method is expected to minimize solvent usage and the size and complexity of the high performance liquid chromatography operation required for (+)-dihydromyricetin purification.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.379-392
• /
• 2021

In this study, an improved acetone-water fractional precipitation process for paclitaxel using ultrasonic cavitation bubbles and gas bubbles was developed. Compared to the conventional method, the time required for precipitation has been reduced by 20~25 times. In addition, the particle size of paclitaxel decreased by 3.5~5.5 times and the diffusion coefficient of paclitaxel increased by 3.5~6.7 times. In the case of precipitation using ultrasonic cavitation bubbles, as the ultrasonic power increased and the temperature decreased, the precipitation rate constant increased. In the case of precipitation using gas bubbles, as the gas flow rate increased and the temperature decreased, the precipitation rate constant increased. Thermodynamic parameters revealed the exothermic, irreversible, and nonspontaneous nature of the improved fractional precipitation.

• Journal of Korea Foundry Society
• /
• v.15 no.2
• /
• pp.194-200
• /
• 1995

Rapidly Solidified (RS) Al-Zr base splats with various alloy contents were prepared by atomization-splat quenching method to understand the continuous and discontinuous precipitation in the aged alloys. And the RS alloys were consolidated by hot extrusion and swaging to analyze the effect of plastic deformation on the precipitation behavior. Discontinuous precipitation dominated at relatively low temperature in the Al-Zr alloy, whereas both V additions to Al-Zr alloys and hot metal working appeared to suppress the discontinuous precipitation. As continuous precipitation is favored in the grain interiors, the driving force for discontinuous precipitation become to disappear with a further process.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.143-150
• /
• 2000

Wet-chemical process using ammonia to precipitate aluminum ion dissolved in a zirconia sol solution is examined. Formation of crystalline bayerite is unfavorable for fine dispersion of zirconia nanoparticles in alumina matrix after heat treatment. To avoid the bayerite formation, it was preferred to make a precipitation with a diluted ammonia or with an ammonia gas flow at high temperature. By optimizing the precipitation process and the calcination temperature, we successfully prepared the uniform microstructure in which tetragonal zirconia particles of ∼30nm is finely dispersed within the alumina grains.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.5
• /
• pp.305-311
• /
• 2005

Effect of Cr contents(Cr: 0.27, 0.45 and 0.65wt.%) on precipitation process has been studied by electrical resistivity measurements, hardness and scanning electron microscope. The first stage of the process consists of the formation of Cr-rich particles, the second stage consists of the competitive growth of these particles. The kinetics of precipitation could be described by Johnson-Mehl-Avrami equation, $f(t)=1-\exp(-kt^n)$. The values of n were found to be in the range from 0.17 to 0.39 at the first stage and from 1.0 to 1.5 at the second stage. The activation energies of Cu-Cr alloys were determined by Cross-Cut method and were 90~136 kJ/mol. The maximum hardness value of $H_RB$ 84 was obtained in Cu-0.65wt.%Cr alloy.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.8-13
• /
• 2002

Controlled precipitation of quasi-binary semiconductor system is newly proposed as an effective and reliable technique for the formation of well-defined and crystallographically aligned semiconductor nanostructures. Using HgTe-PbTe quasi-binary semiconductor system, self-aligned HgTe nanocrystallites distributed three dimensionally within PbTe matrix were successfully formed by the simple three step heat treatment process routinely found in age hardening process of metallic alloys. Examination of the resulting nano precipitates using conventional transmission electron microscopy (CTEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the (100) habit planes making a crystallographic relation of {100}$\_$HgTe///{100}$\_$PbTe/ and [100]$\_$HgTe///[100]$\_$PbTe/. It is also found that the precipitate undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4-5 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for preparing desirable quantum-dot nanostructures.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.13-18
• /
• 2011

In this study, precipitation process was developed for the recovery of the lactic acid from calcium lactate fermentation broth. Calcium lactate yield was improved by decreasing the solubility of calcium lactate through the addition of ethanol (25%, v/v) as a co-precipitant. The optimal lime type, lime concentration, stirrer speed, precipitation time, temperature, and solvent amount for $Ca(LA)_2$ precipitation were CaO, 0.0175 g/mL, 220 rpm, 24 h, $5^{\circ}C$, ethanol 25% (v/v), respectively. Lactic acid was easily and efficiently recovered from precipitated $Ca(LA)_2$ by adding sulfuric acid ($Ca(LA)_2/H_2SO_4$ molar ratio=1:1). In the model solution of organic acids and fermentation broth, the overall yields of recovered lactic acid were 62% and 55%, respectively, under the aforementioned optimal conditions.