• Title/Summary/Keyword: preamble detection

Search Result 50, Processing Time 0.023 seconds

Synchronization Scheme for CCSK based LPD Systems (CCSK 변조방식을 사용하는 LPD 시스템을 위한 동기 기법)

  • Kang, Donghoon;Kim, Haeun;Oh, Wangrok
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.52 no.7
    • /
    • pp.3-9
    • /
    • 2015
  • In this paper, we propose an initial timing and frequency synchronization scheme for low probability detection (LPD) systems with cyclic code shift keying (CCSK). The performance of the LPD system with CCSK highly depend on initial timing and frequency offset. On the other hand, the operating SNR (Signal-to-Noise Ratio) of LPD systems is usually very low. Hence, to guarantee a reliable performance of the LPD system, it is crucial to develop suitable initial synchronization algorithms. In this paper, we propose an initial timing and frequency synchronization scheme suitable for CCSK based LPD system using a repeated preamble pattern.

A Channel Estimation and Detection Method for Multi-Cell Signals Using the PN Sequence Pilot in Time-Varying Channel Environments (시변 채널 환경에서 PN 수열 파일럿을 활용한 다중 셀 신호의 채널 추정 및 검출 방법)

  • Kim, Seong-Min;Chang, Jae-Won;Sung, Won-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.5C
    • /
    • pp.351-360
    • /
    • 2008
  • In cellular mobile radio systems with frequency reuse, the interference signals degrade the channel estimation and signal detection performance due to the low signal-to-interference ratio near coverage boundaries. When the preamble pilot sequences from different cells are orthogonal or located in disjointed positions, they can be used for multi-cell channel estimation and interference cancellation. In time-varying channels caused by Doppler spread, data pilot symbols are needed for channel estimations. However, data pilot symbols are usually located in identical positions for the overhead reduction, which degrades the channel estimation performance. In this paper, we demonstrate a significant amount of performance improvement is achieved by multiplying different pseudonoise(PN) sequences to the data pilot symbols from adjacent interference cells. In particular, for detection scheme using maximal ratio combining(MRC) and inter-cell spatial demultiplexing(ISD), quantitative performance gain of spectral efficiency for different values of Doppler frequency and interference power is presented.

MAC Layer Protocol for Improvement in Power Consumption and Time Delay in a Sensor Network (센서 네트워크에서 전력소모와 지연시간 개선을 위한 MAC 계층 프로토콜 연구)

  • Shin, Jae Kwan;Park, Dong Chan;Kim, Suk Chan
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.2
    • /
    • pp.366-368
    • /
    • 2015
  • This paper proposes a MAC protocol for sensor networks such as disaster detection system which generate the non-periodic packet. B-MAC has been used to solve delay problem for sensor networks, however, the power loss occurs due to excessive preamble and over-hearing. In contrast, S-MAC has a number of drawbacks in power consumption due to synchronization. In this paper, we propose H-MAC and analyze its performance which has improved power consumption compared to S-MAC and overhead and over-hearing compared to B-MAC.

Beamformer-based Acquisition in CDMA-MIMO Communication Systems (CDMA-MIMO 통신 시스템에서 빔형성기 기반의 코드 동기 획득 기술)

  • Kim, Sang-Choon;Baek, Sun-Young;An, Jin-Young;Son, Kyoung-Soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.7
    • /
    • pp.1271-1277
    • /
    • 2008
  • This paper proposes the code acquisition scheme on a MIMO channel for preamble search in a CDMA-MIMO uplink system. The multiple transmit/receive antennas are used for beamforming. The performance of a ML code acquisition technique based on transmit and receive beamforming is analyzed by considering rho detection probability. The acquisition performance and MAT for a MIMO code acquisition system are numerically evaluated. It is shown that multiple transmit antennas can give the code acquisition system a transmit beamforming gain and result in much better performance than a SIMO case.

Selective-Weighted Energy Detector(S-WED) and Synchronization algorithm for IR-UWB systems (IR-UWB 시스템을 위한 선택적 가중치 결합 에너지 검출기(S-WED)와 동기 알고리즘)

  • Ji, Sinae;Kim, Jaeseok
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.7
    • /
    • pp.3-9
    • /
    • 2013
  • This paper proposes a selective-weighted energy detection (S-WED) and a synchronization algorithm appropriate for it in IR-UWB system. Energy detectors that are practical in terms of implementation are employed widely for noncoherent reception in IR-UWB systems. However, they show low performance due to using the energy samples captured at symbol rate. For this reason, weighted energy detectors are developed to improve the performance of EDs. Hence, for WED, not only synchronization but also the weight coefficients are needed to be obtained prior to data detection. Meanwhile, the optimal weighting coefficients of WEDs are known to be energy values. Therefore, synchronization and the weighting coefficients can be obtained simultaneously. This paper proposes an S-WED and a simple synchronization algorithm for it in which sub-intervals having energies under a certain level are excluded in energy accumulation resulting in a simpler WED with a bit performance increase in low SNR region. The proposed algorithm is verified through simulations using the preamble symbol and channel models defined in the IEEE 802.15.4a.

Maximizing the capacity of the IoT-based WSNs by employing the MIM capability (MIM 적용을 통한 IoT 기반 무선 센서 네트워크 성능 최대화 방안)

  • Kang, Young-myoung
    • Journal of Convergence for Information Technology
    • /
    • v.10 no.11
    • /
    • pp.9-15
    • /
    • 2020
  • Wireless sensor nodes adopting the advanced preamble detection function, Message-In-Mesage (MIM), maximize the concurrent transmission opportunities due to the capture effect, result in improving the system performance significantly compared to the legacy IEEE 802.15.4 based sensor devices. In this paper, we propose an MIM capture probability model to analyze the performance gains by applying the MIM function to the wireless sensor nodes. We implemented the IEEE 802.15.4 and MIM by Python and performed extensive simulations to verify the performance gains through MIM capture effects. The evaluation results show that the MIM sensors achieve 34% system throughput gains and 31% transmission delay gains over the legacy IEEE 802.15.4-based sensors, which confirm that it was consistent with the analysis result of the proposed MIM capture probability model.

A Study on the FSK Synchronization and MODEM Techniques for Mobile Communication Part II : Performance Analysis and Design of The FSK MODEM (이동통신을 위한 FSK 동기 및 변복조기술에 관한 연구 II부. FSK 모뎀 설계 및 성능평가)

  • Kim, Gi-Yun;Choe, Hyeong-Jin;Jo, Byeong-Hak
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.3
    • /
    • pp.9-17
    • /
    • 2000
  • In this paper we implement computer simulation system of 4FSK signal MODEM using Quadrature detector and analyze overall tranceiver system. We follow the FLEX wireless paging system standards and construct premodulation filter and data frame. We propose an efficient open loop symbol timing recovery algorithm which takes advantage of 128 bit length preamble pattern and also propose a 32 bit UW pattern which Is based on the optimal UW detection method, and excellent aperiodic autocorrelation characteristic. The BER simulation in the fading channel as well as AWGN is performed with BCH coding and Interleaving to the Quadrature detector system and it is shown that a high coding fain occurs in the fading channel rather than AWGN channel.

  • PDF

Deep Learning based Frame Synchronization Using Convolutional Neural Network (합성곱 신경망을 이용한 딥러닝 기반의 프레임 동기 기법)

  • Lee, Eui-Soo;Jeong, Eui-Rim
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.24 no.4
    • /
    • pp.501-507
    • /
    • 2020
  • This paper proposes a new frame synchronization technique based on convolutional neural network (CNN). The conventional frame synchronizers usually find the matching instance through correlation between the received signal and the preamble. The proposed method converts the 1-dimensional correlator ouput into a 2-dimensional matrix. The 2-dimensional matrix is input to a convolutional neural network, and the convolutional neural network finds the frame arrival time. Specifically, in additive white gaussian noise (AWGN) environments, the received signals are generated with random arrival times and they are used for training data of the CNN. Through computer simulation, the false detection probabilities in various signal-to-noise ratios are investigated and compared between the proposed CNN-based technique and the conventional one. According to the results, the proposed technique shows 2dB better performance than the conventional method.

Design and Implementation of Receiver Algorithms for VDL Mode-2 Systems (VDL Mode-2 시스템을 위한 수신 알고리듬 설계 및 구현)

  • Lee, Hui-Soo;Kang, Dong-Hoon;Park, Hyo-Bae;Oh, Wang-Rock
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.46 no.10
    • /
    • pp.28-33
    • /
    • 2009
  • In this paper, we propose the receiver algorithms suitable for the VHF (Very High Frequency) digital link mode-2(VDL Mode-2) system. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in the VDL Mode-2 system. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link for the VDL Mode-2 system. Also, frequency offset due to the carrier frequency difference between transmitter and receiver and doppler frequency shift must be estimated and compensated for reliable communication. In this paper, the optimum receive filter, packet detection and frequency offset compensation algorithms are proposed and the performance of the VDL system employing the proposed algorithms are evaluated.

Frame Synchronization Algorithm based on Differential Correlation for Burst OFDM System (Burst OFDM 시스템을 위한 차동 상관 기반의 프레임 동기 알고리즘)

  • Um Jung-Sun;Do Joo-Hyun;Kim Min-Gu;Choi Hyung-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.10C
    • /
    • pp.1017-1026
    • /
    • 2005
  • In burst OFDM system, the frame synchronization should be performed first for the acquisition of received frame and the estimation of the correct FFT-window position. The conventional frame synchronization algorithms using design features of the preamble symbol, the repetition pattern of the OFDM symbol by pilot sub-carrier allocation rule and Cyclic Prefix(CP), has difficulty in the detection of precise frame timing because its correlation characteristics would increase and decrease gradually. Also, the algorithm based on the correlation between the reference signal and the received signal has performance degradation due to frequency offset. Therefore, we adopt a differential correlation method that is robust to frequency offset and has the clear peak value at the correct frame timing for frame synchronization. However, performance improvement is essential for differential correlation methods, since it usually shows multiple peak values due to the repetition pattern. In this paper, we propose an enhanced frame synchronization algorithm based on the differential correlation method that shows a clear single peak value by using differential correlation between samples of identical repeating pattern. We also introduce a normalization scheme which normalizes the result of differential correlation with signal power to reduce the frame timing error in the high speed mobile channel environments.