• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.155-164
• /
• 2001

Textile wet-processing industry usually five rise to environmental pollution problems caused by using chemical substance. The objective of this study is to apply enzymes for wool and reduce the environmental problems. Three commercial protein degradation enzymes and a cellulose degradation enzyme as a reference were treated to prevent the shrinkage of wool fabric on laundering. Shrink resistant effects used change with the kinds of enzyme, the amount of enzyme, assistant chemicals, and the pre-treatment condition of wool fabric. When pre-treated with corona before enzyme treatment under ultrasonic condition, the weight loss was increased and strength was decreased and elongation was increased. Both corona pre-treatment and the addition of $Na_2SO_4$ also decreased shrinkage of wool fabrics on laundering. The existence of assistant chemicals increased alkali solubility of wool fabrics.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.1
• /
• pp.27-34
• /
• 2001

The effects of pre-heat treatment(Q/T) on microstructure and hardness of STD11 and STD61 tool steel nitrided by micro-pulse plasma were investigated. The quenching temperature for obtaining matrix hardness of STD11 and STD61 steel on range of HRC 50 to HRC 60 desired for machine parts is about $1070^{\circ}C$ and $1020^{\circ}C$ respectively. The hardness of STD11 and STD61 quenched at the temperature was HRC 63 and HRC 56 respectively. The nitrided case depth of STD11 and STD61 nitrided at $550^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and the depth was approximately $100{\mu}m$. However, hardness and compactness of nitrided layer on Q/T treated specimen were higher than the annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrided layer decreased with the increase of temperature. Phase mixture of ${\gamma}-Fe_4N$ and ${\varepsilon}-Fe_{2-3}N$ was detected by XRD analysis in the nitrided layer formed at the optimum nitriding condition. The optimum nitriding temperature was approximately $490^{\circ}C$ which was $10^{\circ}C$ lower than the tempering temperature for preventing softening behavior of STD11 and STD61 matrix during nitriding process and the surface hardness of nitrided layer obtained by optimum pre-heat treatment condition was about Hv1400.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.582-587
• /
• 2003

To examine the effect of heat treatment temperature in finishing process on PET/PBT Fabric, PET/PBT Fabrics were treated at different relaxing temp., pre-set temp., and final-set temp.. The dimensions such as thickness and density were measured, and the handles were evaluated by Kawabata system. In relaxing which was wet heat treatment, thickness and bulkiness were increased, and NUMERI, FUKURAMI, SOFUTOSA, and THV also were increased but KOSHI was decreased with elevating temperature. With elevating pre-set temp., thickness and bulkiness were decreased, but KOSHI was increased. NUMERI, FUKURAMI, SOFUTOSA, and THV were the best at 180$^{\circ}C$ pre-set treatment. In final-set which was dry heat treatment like pre-set, thickness, bulkiness, NUMERI, HUKURAMI, SOFUTOSA, and THV were decreased, but KOSHI value was increased with elevating temperature. Therefore the best heat treatment condition was 130$^{\circ}C$ relaxing, 180$^{\circ}C$ pre-set, and 160$^{\circ}C$ final-set. And the handle of PET/PBT Fabric was affected much more by relaxing temp. than pre-set temp. and final-set temp.

• Biomolecules & Therapeutics
• /
• v.24 no.1
• /
• pp.94-98
• /
• 2016

The objective of the present study was to elucidate the effect of bisphosphonates, anti-osteoporosis agents, on glucose uptake in retinal capillary endothelial cells under normal and high glucose conditions. The change of glucose uptake by pre-treatment of bisphosphonates at the inner blood-retinal barrier (iBRB) was determined by measuring cellular uptake of $[^3H]3$-O-methyl glucose (3-OMG) using a conditionally immortalized rat retinal capillary endothelial cell line (TR-iBRB cells) under normal and high glucose conditions. $[^3H]3$-OMG uptake was inhibited by simultaneous treatment of unlabeled D-glucose and 3-OMG as well as glucose transport inhibitor, cytochalasin B. On the other hand, simultaneous treatment of alendronate or pamidronate had no significant inhibitory effect on $[^3H]3$-OMG uptake by TR-iBRB cells. Under high glucose condition of TR-iBRB cells, $[^3H]3$-OMG uptake was increased at 48 h. However, $[^3H]3$-OMG uptake was decreased significantly by pre-treatment of alendronate or pamidronate compared with the values for normal and high glucose conditions. Moreover, geranylgeraniol (GGOH), a mevalonate pathway intermediate, increased the uptake of $[^3H]3$-OMG reduced by bisphosphonates pre-treatment. But, pre-treatment of histamine did not show significant inhibition of $[^3H]3$-OMG uptake. The glucose uptake may be down regulated by inhibiting the mevalonate pathway with pre-treatment of bisphosphonates in TR-iBRB cells at high glucose condition.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.14-17
• /
• 1999

Four designed $Nb_{3}$Sn superconductors have been fabricated in order to investigate the effect of pre-heat treatment for internal tin process. 3 types of sub-elements and 2 types of Sn reservers were fabricated. Diffusion of Sn is better in the strand divided Sn equally than in the strand had one large Sn reserver during pre heat-treatment.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.263-273
• /
• 2011

Digital textile printing(DTP) technology made considerable advances in recent years. In this study, a pre-treatment agent has been prepared for the better coloration of digital textile printing. The ink formulation contained three kinds of 5g thickener (CMC, Sodium alginate, Dextrin), 25g urea, 5g sodium carbonate, and 465g distilled water. The optimal sharpness of outline was found in the 1-3% concentration of the pre-treating agent with a viscosity of 10-15 cSt. Even if the color difference between untreated and treated samples was not apparent in the printing step, the color appearance increased after steaming. The color appearance of cyan, magenta, yellow, black reactive colorants increased in the order of CMC>Sodium alginate>Dextrin. Wash fastness to shade change and staining for the treated samples were 4-5 rating, while untreated sample was 1-2 rating. Also, the pre-treated sample with 1:1 mixtures had 4-5 rating. Both dry and wet rubbing fastness to shade change and staining were excellent in the treated samples, whereas rubbing fastness of untreated sample was 1-2 rating. With exception of 3 rating to black color, light fastness properties were 4 rating for the remaining three colors in the regardless of treatment condition and mixing of pre-treating agents. Dry cleaning fastness of all samples were also 4-5 rating irrespective of treatment condition and mixing of pre-treating agents.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.136-141
• /
• 2000

This study was conducted to analyze the properties of the roasted dandelion tea prepared after various pre-treatments such as pre-drying, steaming and air blast drying. The dandelion tea was prepared by roasting the pre-treated dandelion leaves and its total yield, pH, soluble solid content, turbidity, browning and sensory value were evaluated. Total yield and soluble solid content were the highest in case of air blast drying. Turbidity and browning degree were similar in all the teas regardless of their pre-treatment including pre-drying, steaming or air blast drying. The best palatability in the sensory evaluation was obtained at the steaming condition for 60 sec without pre-drying. Longer air blast drying time resulted in the increase in the a and b values. turbidity, browning degree, total yield and soluble solid content in the air blast dried tea.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3313-3315
• /
• 1999

Si direct bonding(SDB) technology is very attractive for both Si-on-insulator(SOI) electric devices and MEMS applications because of its stress free structure and stability. This paper presents on pre-bonding according to HF pre-treatment conditions in Si wafer direct bonding. The characteristics of bonded sample were measured under different bonding conditions of HF concentration, and applied pressure. The bonding strength was evaluated by tensile strength method. The bonded interface and the void were analyzed by using SEM and IR camera respectively. A bond characteristic on the interface was analyzed by using IT- IR. Si-F bonds on Si surface after HF pre-treatment are replaced by Si-OH during a DI water rinse. Consequently, hydrophobic wafer was bonded by hydrogen bonding of Si $OH{\cdots}(HOH{\cdots}HOH{\cdots}HOH){\cdots}OH-Si$. The bond strength depends on the HF pre-treatment condition before pre- bonding (Min:$2.4kgf/crn^2{\sim}Max:14.9kgf/crn^2$)

• Journal of Fashion Business
• /
• v.11 no.2
• /
• pp.92-101
• /
• 2007

This research was carried out following the preceding research on natural cellulose fabrics dyed with extract of fresh african marigold petals. Dyeability on fabrics was tested by dyeing with wool and silk which are natural protein fibers. Dyeing tests were carried out under different pH of the dye solution and mordants, examining the changes in the surface color, K/S value, and maximum absorption wavelength. The probability of improving dyeability was investigated by pre-mordanting with pre-treated chitosan. Wool fabrics showed color tone of medium or less saturation and brightness, in dark yellow color series. An orange color of high saturation was only obtained by tin mordanting. Wool showed higher K/S value than cellulose fibers. In summary, marigold dye has more affinity for protein fibers. It showed better dye effect in wool than silk. The chitosan pre-treatment and pre-mordanting lowered the K/S value of wool, which showed that chitosan pre-treatment does not improve dye uptake. However, different from the dyeing carried out by pre-mordanting without pre-treatment with chitosan, more diversified colors could be obtained by mordants. Therefore, for the dyeing natural protein fibers with marigold extract, post-mordanting does not require chitosan pre-treatment. However, pre-mordanting with chitosan pre-treatment could implement diverse colors. Considering its dyeing behaviors which are similar in both natural cellulose and protein fibers, african marigold extracts can be evaluated as a stable and highly practical dye.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.429-437
• /
• 1996

This paper surveys extraction condition-temperature, pH, and changes of adsorbance in accordance with extraction condition of curcuma Longa L. solution. Using extracted curcuma Longa L. Solution, dyeing behaviors with natural fiber, effect of mordants to color fastness and color change were investigated. It was found that the amount of absorption (K/S value) was increased by mordants (Fe, Cr) and mordants treatment affected color change of dyed fabric. Among the mordants, effect of citric acid to color change of dyed fabric was the smallest, and color difference of post- mordant treatment is smaller than that of pee-mordant treatment in making use of citric acid as mordant. And K/S value of post mordant was higher than that of pre mordant. It was found that the pre - and post- mordants treatment little affected color fastness, but affected the amound of adsorption and color change of dyed fabric.