• 한국연소학회지
• /
• 제17권4호
• /
• pp.11-20
• /
• 2012

The Blow-off characteristics of LPG/air lean pre-mixed flames were experimentally investigated using a double and a multiple concentric coflow burners. Experiments were conducted to understand the effects of recirculation motion, thermal interaction between flames, and stratified flame configuration. Here, the stratified premixed flame is a "new concept" of a flame that sequentially contains fuel rich, stoichiometric, and fuel lean reaction zones in a flame. The blow-off from a lean premixed flame was significantly suppressed with recirculation motion. The recirculation motion by itself, however, was not sufficient to prevent the blow-off when the equivalence ratio became low. The existence of a inner premixed flame could also help to prevent the blow-off of lean premixed flame; however, the blow-off suppression effect was rather diminished by weakened recirculation motion with the presence of inner flame. The inner flame could be separated from an outer flame on a multiple concentric coflow burner, causing recirculation motion as well as thermal interaction between flames to become effective; therefore, the blow-off was further suppressed. The lean premixed flame could be stabilized with a fuel rich premixed flames that was produced with the supply of fuel through an inner nozzle. The penetration of lean premixed gas from outside into the fuel stream produced a lifted rich premixed flame. Chemiluminescence images of OH, CH, and $C_2$ radicals confirmed the structure of a stratified premixed flame. The stable premixed flames could be obtained at the very fuel lean condition by applying the stratified premixed flame concept.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.122-128
• /
• 1999

CARS(Coherent anti-Stokes Raman Spectroscopy) temperature measurement under engine-like condition was validated by measuring unburned gas temperatures of premixed propane-air flame in a constant volume combustion chamber. The measured temperatures were compared with predictions of 2 zone flame propagation model. End-gas temperatures were measured were measured by CARS technique in a conventional 4 cylinder DOHC spark-ignition engine fueled with PRF 80. Cylinder pressure was measured simultaneously with CARS signal and used as a parameter on fitting CARS spectrum to library of theoretical spectra. There was a good agreement between the measured temperature and adiabatic core temperature calculated from measured cylinder pressure. Significant heating by pre-flame reaction in the gas was observed in the late part of compression stroke.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.76-83
• /
• 2002

Mathematically and chemically simplified reaction scheme for n(heptane that simulates autoignitions of the end gases in spark ignition engines has been developed and studied computationally. The five(equation model is described, to predict the essential features of hydrocarbon oxidation. This scheme has been calibrated against autoignition delay times measured in rapid compression machines. The rate constants, activation temperatures, Ta, Arrhenius pre-exponential constants, A, and heats of reaction for stoichiometric nheptane/air has all been optimized. Comparisons between computed and experimental autoignition delay times have validated the present simplified reaction scheme. The influences of heat loss and concentration of chain carrier at the beginning of compression upon autoignition delay times have been computationally investigated.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.99-109
• /
• 2006

In order to obtain the maximum flame retardancy as well as the minimum deterioration of physical properties of PU flame-retardant coatings, chlorine and phosphorus functional groups were introduced into the pre-polymer of modified polyesters. In the first step, the tetramethylene bis(orthophosphate) (TBOP) and neohexanediol dichloroacetate (DCA-adduct) intermediates were synthesized. In the second step, 1,4-butanediol and adipic acid monomers were polymerized with the two kinds of intermediates to obtain copolymers. The modified polyesters containing chlorine and phosphorus (ATBA-10C, -20C, and -30C) were synthesized by adjusting that the content of phosphorus compound was fixed as 2wt% and the contents of chlorine compound (dichloroacetic acid) were varied as 10, 20, and 30wt%. Average molecular weight and polydispersity index of the preparation of ATBAs were decreased with increasing DCA content because of the increase in hydroxyl group that retards reaction.

• 한국추진공학회지
• /
• 제21권3호
• /
• pp.10-17
• /
• 2017

빠른 반응성 및 자체전파특성을 가지는 보론/티타늄 나노 다층박막구조를 대상으로 박막층 수평방향으로의 이종금속간 화학반응 및 화염 전파현상 해석 모델링을 수립하였다. 이종금속간 화학반응은 Arrhenius 반응식을 가정하여 모델링하였으며, 열 및 화학종 확산, 발열 화학반응에 따른 화염 자체전파 현상에 대하여 2차원적 전산해석을 수행하였다. 보론 및 티타늄 박막층의 두께 및 두께비 등 나노구조 형상의 영향을 비롯하여 접촉층 예혼합 정도가 화염 자체전파속도에 미치는 영향을 분석하였다.

• 접착 및 계면
• /
• 제11권1호
• /
• pp.15-25
• /
• 2010

본 연구에서는 레이온직물에 대하여 $180^{\circ}C$ 및 $200^{\circ}C$의 비교적 낮은 온도영역에서 장시간 동안 등온 안정화공정을 수행하였다. 등온 안정화공정 전과 후의 변화된 레이온직물의 중량감소율, 치수변화율, X-선 회절, 그리고 전자현미경을 사용하여 섬유 형태를 관찰한 결과, 레이온 프리커서 섬유의 화학적, 물리적 변화는 $200^{\circ}C$ 이하의 안정화온도에서도 지속적이면서 서서히 진행되는 것으로 확인되었다. 그리고 안정화공정 전에 사용한 네 종류의 화학전처리제는 레이온직물의 특성변화에 서로 다른 영향을 주는 것으로 조사되었다. 결과적으로, 주어진 안정화 조건하에서 $H_3PO_4$와 $Na_3PO_4$$는 레이온직물의 안정화 반응을 촉진시키는 역할을 하는 반면, $NH_4Cl$과 $ZnCl_2$는 안정화 반응을 더디게 하거나 지연시키는 역할을 하는 것으로 판단되었다. 또한 $350^{\circ}C$에서 행한 2차 안정화에서는 $H_3PO_4$가 상대적으로 가장 낮은 직물의 중량감소율을 보여주었으며, 난연 기능을 가지고 있는 인산이 2차 안정화 단계에서도 후속 반응을 다소 더디게 하는데 기여한 것으로 사료되었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1557-1561
• /
• 2006

The use of chemically modified silica-salen$(NEt_2)_2$ was studied for the separation and concentration of the metal ions from an aqueous solution by a solid phase extraction. After the salen(NEt2)2 was synthesized, it was chemically bonded to silica gel by a diazonium coupling reaction. The adsorption capacities and binding constants were obtained with respect to Cu(II), Mn(II), Pb(II) and Zn(II) by a graphical method. Some experimental conditions were optimized for the determination of the trace elements. After the silica-salen(NEt2)2 was pulverized in a sample solution of which the pH was adjusted, the solution was stirred to pre-concentrate the metal ions. The metal ions adsorbed were desorbed with nitric acid solution. And the concentrated analytes were determined by a flame AAS. The method proposed here was so rarely influenced by a sample matrix that the procedure was applied to 3 types of water samples. The reproducible results of less than 10% RSD were obtained at the concentration level of ca. 100 ng/mL and the recoveries of 95-109% were obtained in the spiked samples in which given amounts of analytes were added.

• 한국추진공학회지
• /
• 제23권5호
• /
• pp.36-42
• /
• 2019

본 연구에서는 리오셀 섬유를 사용하여 탄소직물을 제조함에 있어, 인계 난연제인 Phosphoric Acid(PA)와 가교제인 Melamine resin (MR)을 사용하여 섬유의 전처리를 수행하고 TGA, FT-IR, XRD, 중량 분석을 통하여 물리적, 화학적 구조 변화에 대하여 고찰하였다. 전처리를 통하여 내염화 및 흑연화된 직물의 경우 미처리 직물과 비교하여 중량 수율이 14.7%, 직물 폭과 길이의 수율이 각각 15%, 15.5% 증가함을 확인하였다. 이러한 결과는 셀룰로오스의 탈수반응을 촉진과 함께 섬유 표면에 char를 형성하고, 셀룰로오스 분자 내의 가교반응을 유도하여 내염화 시 안정한 구조 형성에 의한 효과로 설명할 수 있다.

• 한국화재소방학회논문지
• /
• 제27권4호
• /
• pp.41-46
• /
• 2013

본 연구는 가구류를 구성하는 주요 재료의 열적조건에 따른 반응특성과 화염전파해석에 필요한 열해리 물성을 제공하기 위해 열중량분석을 수행하였다. 실험대상 시편은 가구류에 널리 적용되는 MDF 판재와 코팅재, 합성피혁과 쿠션재 등이며 가열율 $10^{\circ}C/min$, 최대 온도 $600^{\circ}C$까지 실험을 수행하였다. 실험결과 MDF 소재의 경우 $324^{\circ}C$에서 피크 반응을 나타냈었으며 MDF 코팅재의 경우 초기 피크반응온도가 $270{\sim}280^{\circ}C$로 감소하였다. 합성피혁과 폼 소재의 경우 재료를 구성하는 폴리머의 종류에 따라 기준온도와 기준 반응율이 차이를 보였으나 기준온도는 $270^{\circ}C$와 $420^{\circ}C$ 정도로 비교적 유사한 경향을 나타냈다. Lyon 등이 제시한 방법에 의해 반응상수와 활성화 에너지를 산정하기 위해 시편의 기준 온도와 기준 반응율을 제시하였으며 이러한 기초 물성연구를 통해 화염전파특성을 이해함과 동시에 화재해석의 신뢰성을 향상시키는데 기여하고자 한다.