• 한국전기전자재료학회논문지
• /
• 제23권1호
• /
• pp.18-23
• /
• 2010

We demonstrated that the solution processed organic light-emitting diodes (OLEDs) have the high efficiency with pre-treated indium-tin-oxide (ITO). ITO surface was pre-treated with four methods and compared each other. The pre-treatment of ITO surface improves the chemical and physical characteristics of ITO such as the surface roughness, adhesion property, and the hole injection ability. These properties were analyzed by the contact angle, atomic force microscope (AFM) image, and the current flow character in device. As a results, the device with ITO pre-treated by $O_2$ plasma shows the current efficiency of 5.93 cd/A, which is 1.5 times the device without pre-treatment.

• 한국의상디자인학회지
• /
• 제5권3호
• /
• pp.15-23
• /
• 2003

Chestnut trees have been used as a dyeing material, which are grow naturally, are cultivated all the area of Korea. So, there is abundant amount of the materials and they have better colorfastness than other natural dyeing materials. But chestnut husk extract is good at silk and wool fabrics, not cotton fabrics. That's why many methods using chestnut extraction for dyeing are being studied. But most of them depend on treatment method with chemical material which doesn't fit with the aim, using natural materials. Therefore in this research, we used protein pre-treatment method which is dyeing chestnut husk extract after treating at cotton fabrics with bean sap. And we studied the effect of dyeability of chestnut husk extract to cotton fabrics. As a result of pre-treatment of bean sap at cotton fabrics, dyeability was increased. Besides laundering fastness, dry cleaning fastness, perspiration fastness and light fastness were almost increased.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.115-121
• /
• 2006

The purpose of this study was to investigate applicability of pretreatment on the existing biological treatment for domestic wastewater reclamation. From Jar Tests, it was found that optimum dosage of coagulant was PAC 0.5mg/L and $FeCl_3$ 180mg/L for urban sewage. In this study, PAC 0.5mg/L was selected considering sludge production and the amount of coagulant required. In a continuous experiment performed with combining chemical coagulation and biological treatment, a considerable removal efficency was obtained in term of BOD, SS, T-N, T-P and ABS. When the raw sewage was supplied into the pre-chamical treatment facility, the removal of BOD and SS was 48.3% and 81.1%. However T-N removal was very low which means T-N consists of $NH_3-N$ mostly. T-P was almost completely recluced by the chemical addition. The effluent BOD & SS was 57~76 and 21~43mg/L, which could reduce the size of biological treatment facility. From the cost estimation pre-chemical treatment could save around half of the area required for biological treatment with post ceagulation.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.294-303
• /
• 2018

In this study, eco-friendly natural dyeing for pig leather was explored by using onion skin which is food waste. Sodium caseinate was used as a pre-treatment agent to improve dyeability of pig leather and its effect on dye uptake was investigated according to treatment concentration. Dye uptake of the pre-treated pig leather was increased by about two times compared to untreated one at 0.2% pre-treatment concentration. Onion skin colorant imparted YR color on pig leather. After mordanting, the color of pretreated/dyed pig leather was varied from brick-red to khaki shades. However, mordanting did not improved dye uptake of the pre-treated/dyed pig leather significantly. The color-fastnesses of un-mordanted samples to light, dry cleaning, rubbing were grades 3-4, 5, and 4, respectively, which is good enough to meet all Korean Standard for Fastness of leather products. After mordanting, the light fastness of pig leather was improved to 4, 4-5 grade. The efficacy of sodium caseinate as a pre-treatment agent for pig leather was verified by improved dye uptake and good colorfastness. And, the natural dyeing of pig leather using food waste would be a significant sustainable way in terms of eco-friendliness and reuse of biomass to reduce environmental pollution.

• The Journal of Korean Physical Therapy
• /
• 제16권4호
• /
• pp.226-234
• /
• 2004

The purpose of this study was to evaluate effects of neural mobilization on the grip strength. Subjects were consist of 28 people who had no disorder of upper extremity from 19 to 29 years of age(mean age: 21.86) during 7 day from March 22, 2004 to 30 day. All Subjects received Neural mobilization of upper extremity for 15 minutes during 7 days. Digital grip strength dynamometer was used to measure grip strength. All measurements of each patients were measured at pre-treatment and 7 days post-treatment. The results of this study were summarized as follows : 1. The grip strength wasn't significantly increased between pre-treatment and post-treatment at 1 days(p .05). 2. The grip strength was significantly increased between pre-treatment and post-treatment at 7 days(p .05). 3. The results of analyzed effects of neural mobilization on the grip strength between pre-treatment and post-treatment that wasn't significantly increased at 1days(p.05) but significantly increased at 7days(p .05).

• 신재생에너지
• /
• 제10권1호
• /
• pp.20-29
• /
• 2014

The present study investigated the effects of thermal pre-treatment on the enhancement of anaerobic biodegradability of waste activated sludge at varied TS concentration levels. The activated sludges were thermally oxidized for 30 minutes at $80{\sim}200^{\circ}C$ with varied TS concentrations (2%, 4% and 6%). and then, sludge characteristics, solubilization efficiency and methane production yield of thermally pre-treated sludges were analyzed. The higher the temperature in the thermal pre-treatment, the higher the concentration levels of dissolved matters such as $SCOD_{Cr}$, $NH_4{^+}$ and VFAs, which indicates that the thermal pre-treatment facilitates the hydrolysis and acid fermentation. Furthermore, the solubilization efficiency was increased in proportion to the temperature rise at all TS concentrations and was reached at 68.9%, 55.6% and 53.1%, respectively, at $200^{\circ}C$. In the BMP test of the pre-treated sludges, higher methane production yields were observed as 0.313. 0.314 and $0.299m^3\;CH_4/kg\;VS_{add}$ at the condition of TS 2% ($160^{\circ}C$), 4% ($160^{\circ}C$) and 6% ($180^{\circ}C$), respectively, and degradation rate was increased by 84%, 79% and 65% compared with non-pretreated waste activated sludge. These findings suggest the effectiveness of thermal pre-treatment of waste activated sludge for anaerobic biodegradable process.

• 한국작물학회지
• /
• 제59권4호
• /
• pp.406-412
• /
• 2014

The influence of rainfall during the ripening stage on pre-harvest sprouting, seed viability, and seed quality was investigated in two Korean rice cultivars, Shindongjin and Hopum. When the rainfall was artificially treated in a greenhouse, HP started to pre-harvest sprouting at three days of rainfall treatment (DRT), but Shindongjin did not show pre-harvest sprouting at 40 DAH treatment and just 0.3~0.8% at 50 DAH, which was much lower than 15.3~25.8% of Hopum in the same treatment. After harvest, the seed germination of Hopum decreased about 10~25% compared to non-treated seeds, but that of Shindongjin decreased much little rate than that of Hopum. The seed longevity tested by accelerated aging decreased with prolonged rainfall period in both cultivars, but the varietal difference was clear; Shindongjin could withstand longer accelerated aging than Hopum. Shindongjin maintained its germination (>50%) ability after 15 days of accelerated aging regardless of the rainfall treatment period and time, but Hopum dropped below 50% germination ability after only 5 days of accelerated aging. In conclusion, rainfall during the ripening stage induced not only pre-harvest sprouting, but also reduced seed quality and longevity during storage, which varied between two cultivars.

• 대한간호학회지
• /
• 제33권8호
• /
• pp.1153-1160
• /
• 2003

Purpose. 1) To identify the time taken from symptom onset to the arrival at the hospital (pre-hospital delay time) and time taken from the arrival at the hospital to the initiation of the major treatment (in-hospital delay time) 2) to examine whether rapid treatment results in lower mortality. 3) to examine whether the pre- and in-hospital delay time can independently predict in-hospital mortality. Methods. A retrospective study with 586 consecutive AMI patients was conducted. Results. Pre-hospital delay time was 5.25 (SD=10.36), and in-hospital delay time was 1.10 (SD=1.00) hours for the thrombolytic therapy and 50.24 (SD=121.18) hours for the percutaneous transluminal coronary angio-plasty (PTCA). In-hospital mortality was the highest when the patients were treated between 4 to 48 hours after symptom onset using PTCA (p=.02), and when treated between 30 minutes and one hour after hospital arrival using thrombolytics (p=.01). Using a hierarchical logistic regression model, the pre- and in-hospital delay times did not predict the in-hospital mortality. Conclusion. Pre- and in-hospital delay times need to be decreased to meet the desirable therapeutic time window. Thrombolytics should be given within 30 minutes after arrival at the hospital, and PTCA should be initiated within 4 hours after symptom onset to minimize in-hospital mortality of AMI patients.

• Preventive Nutrition and Food Science
• /
• 제17권1호
• /
• pp.46-52
• /
• 2012

This study was performed to investigate the effects of pre-treatment and storage temperature and periods on the quality characteristics of ginger paste. The pH of the ginger paste remained constant during room temperature storage but increased with prolonged refrigerated storage periods. During five months of frozen storage, regardless of pre-treatment, the pH of most of the samples decreased slightly and then remained constant. In the color value of ginger paste stored at room temperature, the samples with and without chemical additives changed in color more prominently than fermented or pasteurized samples. Intriguingly, the color value for samples containing chemical additives changed more dramatically when stored under refrigerated conditions. However, the L, a, and b values of samples stored under frozen storage conditions did not change even after ten months. Most of the samples contained glucose and fructose, except for the fermented samples. The free sugar content of samples slowly decreased with increasing storage periods, while the organic acid content generally decreased also, regardless of sample type. Depending on pre-treatment and storage temperature, the gingerol content of the samples was either retained or decreased with prolonged storage time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.247-247
• /
• 2010

DLC(diamond-like carbon)는 비정질 고상 탄소의 하나로 다이아몬드의 유사한 높은 경도, 내마모성, 윤활성, 전기절연성, 화학적 안정성을 가지고 있는 재료이다. 이러한 우수한 특성 때문에 DLC는 박막의 형태로 여러 종류의 보호코팅에 많이 응용되고 있다. DLC의 광범위한 응용에 있어 가장 큰 문제점은 박막이 갖는 높은 잔류응력과 이에 따른 기판과의 낮은 접착성으로 알려져 있다. 최근 연구에 의하면, plasma pre-treatment를 통해 PTFE기판에 DLC박막의 adhesion strength를 증진 시킬 수 있다고 보고하였다. 또한 ion beam technique를 이용하여 잔류응력을 줄이고 기판과의 접착력을 높일 수 있다는 것도 보고 되었다. 이에 기인하여 pre-treatment가 DLC합성에 잔류응력을 낮추고 기판과의 접착성을 높이는 효과를 보일 것이라고 가정하고 연구하였다. 본 연구에서 pre-treatment가 Diamond-like Carbon의 stainless steel 합성시 stress와 adhesion에 어떤 효과가 있는지 알아보기 위해, pre-treatment시와 synthesis of DLC film시에 13.56MHz 150W RF플라즈마 화학기상 증착 (RF-PECVD) 법을 통해 합성되었다. pre-treatment시에 H2(80 sccm), O2(10 sccm), N2(20 sccm)의 가스 종류를 다르게 하였고, synthesis of DLC film시에는 CH4 (20 sccm), H2 (80 sccm)가스의 유량을 고정하였다. 합성된 DLC 박막은 Contact Angle Analyze, Raman spectroscopy, Scratch tester를 이용하여 접촉각, D peak Position, G peak Position, ID/IG ratio, 접착력을 측정하였다.