• 무역상무연구
• /
• 제42권
• /
• pp.337-364
• /
• 2009

Trade remedy is the system that additional duty or import quantity restriction would be imposed on the import products, in case that unfair imports damage domestic industry or even proper import products damage significantly domestic industry. The system is secured by the act of unfair trade practice investigation & industrial damage remedy, tariff act, WTO agreement. Anti-dumping duty act is the system that duties are assessed with the equal or less amount of the difference between normal transaction price and dumping price, in case that the product imported under dumping price causes or may cause damages in domestic industry, or the development of domestic industry should be delayed practically. Recently, the problems related with anti-dumping duty imposed as the part of the trade remedy occur frequently. It is necessary to discuss whether the anti-dumping duty act is practically trade remedy which does comply with GATT regulations and WTO agreements as the criteria of international law and is in line with the intent of domestic act in the suffered country, or it does return to protective trade or reduce the protection of consumer. On the basis of this discussion, it would be difficult to impose the antidumping duty on industrial products in order to protect domestic industry, when considering the expected free trade agreements of Korea-US, Korea-China and Korea-Japan. In order to survive under the current severe competition of world trade market, companies should raise the competitiveness by themselves without relying on the current trade acts to provide with a certain protection. This thesis should bring those attentions.

• Advances in aircraft and spacecraft science
• /
• 제2권4호
• /
• pp.427-443
• /
• 2015

The present paper is the follow-on of a former work in which the influence of the gas-surface interaction models was evaluated on the aerodynamic coefficients of an aero-space-plane and on a section of its wing. The models by Maxwell and by Cercignani-Lampis-Lord were compared by means of Direct Simulation Monte Carlo (DSMC) codes. In that paper the diffusive, fully accommodated, semi-specular and specular accommodation coefficients were considered. The results pointed out that the influence of the interaction models, considering the above mentioned accommodation coefficients, is pretty strong while the Cercignani-Lampis-Lord and the Maxwell models are practically equivalent. In the present paper, the comparison of the same models is carried out considering the dependence of the accommodation coefficients on the angle of incidence (or partial accommodation coefficients). More specifically, the normal and the tangential momentum partial accommodation coefficients, obtained experimentally by Knetchel and Pitts, have been implemented. Computer tests on a NACA-0012 airfoil have been carried out by the DSMC code DS2V-64 bits. The airfoil, of 2 m chord, has been tested both in clean and flapped configurations. The simulated conditions were those at an altitude of 100 km where the airfoil is in transitional regime. The results confirmed that the two interaction models are practically equivalent and verified that the use of the Knetchel and Pitts coefficients involves results very close to those computed considering a diffusive, fully accommodated interaction both in clean and flapped configurations.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.65-71
• /
• 2016

Injection rate, injection quantity and injection timing of fuel are controlled precisely by electric control in CRDI system. Particularly, injection rate being influenced with injection pressure affects to spray characteristics and fuel-air ratio, so it is a very important factor in diesel combustion. In this study, injection rates in accordance with injection pressure at a constant ambient pressure were measured with Zeuch's method. Under the same condition, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. Injection start time and injection period were practically affected with injection pressure. Also, initial injection rate, spray penetration, spray angle and breakup of high density droplets region in the spray were affected with injection pressure. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for common rail direct injection system.

• 한국항해항만학회지
• /
• 제37권5호
• /
• pp.511-517
• /
• 2013

UNFCCC was adopted in 1992 in order to prevent global warming. However, as a lack of concrete reduction goal and implementation plan, UNFCCC could not have effectiveness. In 1997, Kyoto Protocol to UNFCCC was adopted and UNFCCC regime started practically binding on the parties. Global warming takes the leading role in changing marine environment such as the rising of water level and sea water temperature. Also, Ocean plays the vital role in storing carbon to prevent global warming. Meanwhile ships which get the propulsion generated by consuming the fossil fuel are identified as GHG source and the discussions regarding the control of GHG emitted from ships are still in progress in IMO. IMO instrument has some legal conflicts with UNFCCC in principle. Therefore, this paper reviews the present UNFCCC regime and UNCLOS. Also, it surveys activities of IMO and analyze the Amendment to MARPOL73/78 Annex VI which entered into force on January 1, 2013. Finally, conclusions suggest the improvements in order to ensure effectiveness the new Amendment to MARPOL73/78 practically.

• Journal of Community Nutrition
• /
• 제2권1호
• /
• pp.36-49
• /
• 2000

Evaluation of nutritional status is an essential element in providing appropriate intervention strategies to achieve the highest level of health, Nutritional assessment of the older population is complicated by many factors which do not significantly affect the nutritional status in young adults, therefore, it should be considered in two ways; community-dwelling elders group and hospitalized or institutionalized elderly group. To sort out the individuals with nutritional problems in a community efficiently, nutrition screening tools must be simple, relatively inexpensive, and applicable to a large number of subjects. Combination of tools and indicators such as 24-hour food recall, body weight and height, and questionnaires on eating practices, and the presence of chronic diseases is practically applicable as basic tools of nutritional screening of older age group. However, the lack of validated screening techniques remains a barrier in improving nutrition. Validation is only limited to energy, BMI, protein intake of the older populations living in western countries. Further refinement of nutritional assessment tools is demanded to figure out whether those are practically applicable to community-living older adults in Asian Society. A careful and systematic evaluation of nutritional assessment tools should be carried out prior to implementation of stepwise nutrition service to the heterogeneous older population. For an in-depth nutritional assessment at the individual level, we need to extend research efforts to clarify the requirements of nutrients due to aging and diseases. More cost-effective method that will allow rapid analysis of survey results are needed so that information can be readily available to policymakers.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.133-146
• /
• 1999

The charge operation of an ice storage system has been analyzed in this paper. The thermal characteristics of major components of the ice storage system. i.e., the refrigerator and the ice storage tank are evaluated from performance tests on an existing ice storage system. Based on the measured data for thermal characteristics, a simulation is carried out for the charge operation and the effect of the refrigerator size on the system performance is investigated. The results indicate that the larger the refrigerator size for a given storage capacity, the lower the inlet temperature of the ice storage tank so that the lower the efficiency of charge operation. It is also found that there exists an optimal size of the refrigerator with which the ice storage at the end of the charge operation is maximized, but the complete charge is not possible even with the optimally sized refrigerator. This leads to the result that the design capacity of the storage tank should be larger than the required amount of cold energy for the daytime cooling considering the practically chargeable amount of cold energy during the nighttime. Where the cooling load sharing of the storage is 40%, the nominal capacity of an ice storage tank needs to be larger than the required storage amount by 30%.

• ETRI Journal
• /
• 제38권5호
• /
• pp.922-933
• /
• 2016

IP header compression schemes offer a valuable measure for bandwidth preservation. Such schemes have been practically implemented in infrastructure-based IP networks for point-to-point links. However, minimal research and practical implementation efforts have been conducted in the direction of an IP header compression strategy that can meet the peculiar requirements of multi-hop ad hoc wireless networks. In this paper, we present a practically implemented multi-hop IP header compression scheme using the Robust Header Compression (ROHC) protocol suite. The scheme runs on a novel identifier (ID) based networking architecture, known as an ID-based ad hoc network (IDHOCNET). IDHOCNET additionally solves a number of bottlenecks of pure IP-based ad hoc networks that have emerged owing to IP address auto-configuration service, distributed naming and name resolution, and the role of an IP address as an identifier at the application layer. The proposed scheme was tested on a multi-hop test bed. The results show that the implemented scheme has better gain and requires only O (1) ROHC contexts.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.21-28
• /
• 2014

The studies of the spray characteristics for a CRDI engine had been advancing by many researchers, because the performance and exhaust emission were significantly affected with the spray characteristics. But most experiments of the studies would be done at low ambient pressure conditions under 2MPa. In this study, injection rates were measured with Zeuch's method at various ambient pressures to 5MPa and a constant injection pressure of 130MPa. On the same conditions, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. The initial injection rate, penetration, angle, velocity and breakup of the spray were practically affected with a variation of the ambient pressure, but the injection start time and injection period were scarcely affected. As the ambient pressure was higher, the breakup of a high density droplet region in the spray was happened slowly and the main position of breakup was shifted from a front of the spray to a upstream around a nozzle. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for a CRDI.

• Natural Product Sciences
• /
• 제4권1호
• /
• pp.45-50
• /
• 1998

Seven triterpenoid saponins such as oleanolic acid 28-O-{\beta}-D-glucopyranosyl$ ester, hederagenin $28-O-{\beta}-D-glucopyranosyl$ ester, chikusetsusaponin IVa, udosaponin A, salsoloside C, udosaponins F and C were isolated from the aerial parts of Aralia continentalis, among which two $28-O-{\beta}-D-glucopyranosyl$ esters of oleanolic acid and hederagenin are isolated for the first tome from this plant. These results suggested that the chemical components of Korean Dokwhal are practically identical to those of japanese Udo supporting the chemotaxonomical point of view.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.301-308
• /
• 1998

Eight dimensions of quality suggested by Garvin are well-known. It can serve as a framework for strategic analysis to obtain leverage of quality in a competitive market. However, some practically important dimensions such as usability, cost, etc. are not included in the Garvin's. Based on a survey of newly introduced products, we suggest another framework for dimensions of quality: function, time, limitation, usability, problem prevention, economy, maintainability, nativeness, These dimensions are explained with examles.