• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.195-202
• /
• 2002

Lap splices of longitudinal reinforcement steels were practically located in the potential plastic hinge region of most bridge columns that were constructed before the 1992 seismic design provision of Roadway Bridge Design Specification in Korea. The objective of this research is to evaluate the seismic performance of shear-critical reinforced concrete(RC) bridge piers with poor detailing of the starter bars in the plastic hinge region, and to develop the enhancement scheme of their seismic capacity by retrofitting with fiber composites. Seven test specimens in the aspect ratio of 2.5 were made with three confinement ratios and two types of lap splices. Quasi-static test was conducted in a displacement-controlled test mode. A significant reduction of displacement ductility ratios were observed for test columns with lap splices of longitudinal steels.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.14-17
• /
• 2002

A configuration for radio-over-fiber transmission, with remote LO delivery from the central office, and a simple, cost-effective, base station solution is proposed. It is shown that using practically available components, and even with a fiber dispersion of 17 ㎰/nm/km, it is possible to transmit, without repeaters, bit rates of up to 622 Mbit/s for about 20 km at a bit-error rate of 10$\^$-9/, with 0㏈m laser power and a modest optical gain of 6㏈. By increasing the optical gain to 25 ㏈, the link length can be increased to ∼80 km.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.49-56
• /
• 1992

In this paper a band-pass filter using dielectric resonators with tuning screw and spacer at Ku-band is designed and constructed. For the filter design and construction, the coupling coefficient K between two resonators is numberically evaluated. The external quality factor Q$_{ex}$ is also calculated with a microstrip line which is necessary for the field excitation of dielectric resonator. The coupling between dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter in band-pass filter. The Q$_{ex}$ and K data which are evaluated by numberical analysis are practically applied to the filter construction. The theoretical Band-pass filter responses are given by Chebyshev approximation and they are nearly similar to the experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.197-201
• /
• 2001

The influence of argon, oxygen, and nitrogen admixtures on the dissociation of $Cl_2$ molecules in a glow discharge low-temperature plasma under the constant pressure conditions was investigated. For $Cl_2/Ar$ and $Cl_2/O_2$mixtures, the concentration of chlorine atoms was observed to be a practically constant at argon or oxygen concentrations up to 50%. This invariability is a most pro bably explained by relative increase in rate of $Cl_2$ direct electron impact dissociation due to the changes in electrophysical parameters of plasma such as EEDF, electron drift rate and mean energy. For all the considered mixtures, the contribution of stepwise dissociation involving active species from gas additives (metastable atoms and molecules, vibrationally excited molecules) was found to be negligible.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.841-844
• /
• 2005

Multi-output VC-TCXO (Voltage Controlled-Temperature Compensated Crystal Oscillator) for WCDMA has integrated the additional CMOS inverter, so it can be normal clipped sinewave output and additional CMOS output and it can be satisfied the VC-TCXO Characteristics that WCDMA system required. In this paper, however 26MHz is used for reference frequency, similarly and practically, it is usable from 10MHz to 40MHz, Most important factor to integrate CMOS inverter internally is the isolation between normal output and additional output. For this, it is separated in package design, due to this, when it isn't used additional output, it shows the same electrical performance, when it is used additional output, it has minimum-rized the interference. and then the important characteristics in reference oscillator are met to WCDMA system's requirements, like phase noise and frequency short term stability.

• 대한전자공학회논문지
• /
• 제11권4호
• /
• pp.30-38
• /
• 1974

Moment법에 의하여 임의형상으로 굴곡된 선형 안테나의 전류분포와 임의의 급전점에 대한 인력임피던스를 구하는 방법을 제시하고 그 이론을 정강파형으로 굴곡된 안테나에 적용하여 전류분포와 입력임피던스를 구했다. 실험결과가 그의 타당성을 뒷 받침하고 있어 다른 형태의 안테나 문제를 분석하는데 널리 이용 될 수 있다.

• 산업기술연구
• /
• 제17권
• /
• pp.137-143
• /
• 1997

The objective of this study is to find the strength properties of concrete using blast furnace slag. Its mechanical strength properties investigated include compressive strength, flexural strength, and tensile strength. The main expeirmental variables were cement type, coarse aggregate size(19, 25mm), and water/cement ratio(28, 32, 36%). The principal results obtained from this study are as follows ; it was possible to obtain the compressive strength of $500{\sim}700kg/cm^2$ concrete by using the blast furnace slag. Therefore, blast furnace slag was proved to be superior to ordinary portland cement in manufacturing the high strength concrete with the same mix conditions. In the near furture, concrete using blast furnace slag is expected to be practically used in the field.

• 한국전자거래학회지
• /
• 제1권2호
• /
• pp.1-25
• /
• 1996

This study aims to provide conversion process to acquire IETM and fundamental IETMDB construction necessary for IETM. As the weapon system and other equipments are highly advanced and electronically sophisticated, the amount of information necessary to operate and maintain the systems is being dramatically increased. Thus, it is theoretically and practically impossible to maintain the huge amount of information in the paper-based manual. Furthermore, the vast amount of paper based-technical information makes it difficult to share them in real time. This paper discuss how to solve these prolems by using highly advanced information technology such as network, database, data communication, etc First, we propose an effective conversion process for the decision of IETM classes from Class 1 to Class 5. Second, we also propose a construction of IETMDB and IETM system by using CALS standard and Content Data Model (CDM).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3689-3700
• /
• 2016

It is not practically feasible to apply hardware-based fault-tolerant schemes, such as hardware replication, in mobile devices. Therefore, software-based fault-tolerance techniques, such as checkpoint and rollback schemes, are required. In checkpoint and rollback schemes, the optimal checkpoint interval should be applied to obtain the best performance. Most previous studies focused on minimizing the expected execution time or response time for completing a given task. Currently, most mobile applications run in real-time environments. Therefore, it is extremely essential for mobile devices to employ optimal checkpoint intervals as determined by the real-time constraints of tasks. In this study, we tackle the problem of determining the optimal inter-checkpoint interval of checkpoint and rollback schemes to maximize the deadline meet ratio in real-time systems and to build a probabilistic cost model. From this cost model, we can numerically find the optimal checkpoint interval using mathematical tools. The performance of the proposed solution is evaluated using analytical estimates.

• 한국조리학회지
• /
• 제20권5호
• /
• pp.71-75
• /
• 2014

The purpose of this study is to verify antecedent variables that affect emotional labor. The results are as follows. First, display rules positively affected deep acting and negatively affected surface acting. Second, customer contact time positively affected deep acting but did not affect surface acting. Third, the interaction between display rules and customer contact time did not have significant effects on surface acting but negatively affected deep acting. The implications based on these results are as follows. First, theoretically, this study extends the range of leading variables that affect emotional labor and verifies the moderation effects between these variables. Next, practically, this study suggests that presenting harmonious criteria with regards to display rules and customer contact time that fit well into the concept of food service company is a very useful tool to manage emotional labor of the employees. The limitation of this study is that the causal relationship between variables demonstrated in this study cannot be generalized due to convenience sampling and cross sectional research.