• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2018

It is ten years since the Good Agricultural Practices (GAP) certification system was implemented in Korea, and the government aims to acquire GAP certification up to 25% of the total agricultural areas by 2022. As of the end of 2017, 6.3% of the total cultivated area and 8.1% of the total farm households were certified, which is slower than expected. The purpose of this study was to investigate the causes of the GAP accreditation through the surveys and on site inspections of the GAP certified farmers and to propose the development plans according to the problems analysis of the current system in order to expand the GAP certification. Certified farmers recognized the need for agricultural safety and hygiene, but there were a lot of nonconformities regarding practical practices. This is due to the ambiguity of the certification standards and the wrong ways in the training method for the producers. GAP certification is slow to expand to farmers and low consumer awareness is considered a structural problem of GAP certification system, and improvement measures are needed accordingly. It is necessary to convert the state-led GAP certification system into a state-led private certification system. It is necessary for the government to focus on policy, research and follow-up management. In addition, it is necessary to establish a separate organization in the form of a contribution organization for the certification, education, and public relations. In addition, long-term plan must be established and systematically carried out. It is necessary to integrate too many certification agencies compared to the farming scale of Korea, and it is necessary to realize the application fee for realizing the financial independence of the certification body and correct certification work. In addition, inspector qualification standards should be strengthened and training system should be improved to nurture high quality inspectors. Simplified certification standards based on statutes need to be subdivided into practical action plans. In order to improve the GAP certification system, it is necessary to have a discussion through a committee composed of specialists from industry and academia, and it will be possible to contribute to the safety of the food of the people through the production of safe by drawing concrete development plans.

• Management & Information Systems Review
• /
• v.35 no.3
• /
• pp.57-79
• /
• 2016

It is required to derive various conclusions by identifying the type of power and the relationship between SCMs and presenting practical implications. Thus, we can identify the differential effects of each type of power on SCM performance. We can contribute to develop the practical implications at more sophisticated multi-dimension by comparing results of this study with various SCM theories. Through previous studies, the source of power is largely divided into binding power and non-binding power. Binding power is classified into behavior coercion, binding reward and relationship legitimacy. Non-binding power is classified into work expertise, information superiority and value compliance. Enterprises should fully understand and recognize partners within supply chains including understanding of the source of power, imbalance and results. Thus, we look into types of power and effects on trust and commitment, and identify a causal relationship leading to collaboration and SCM performance. Specific research results are as follows. First, the binding power did not give a significant effect to the trust. However, the binding power gave a positively(+) significant effect to the commitment. Second, non-binding power showed a significant effect on both trust and commitment. As a result of analysis on total effects, it was shown that non-binding power gave indirect effects to collaboration and SCM performance. Third, it was shown that both trust and commitment significantly affected collaboration. From the perspectives of social exchange theory and trading cost theory among inter-organizational relationship theory, it may lead to SCM performance of trust, commitment and collaboration. Moreover, it was found that association of each attribute of power led to the significant result. Fourth, it was shown that trust and collaboration significantly affected SCM performance. However, commitment did not directly affect SCM performance, but it indirectly significantly affected SCM performance through collaboration. Proper use of this power can firmly build partnerships between members of the supply chain and induce the improvement on supply chain performance and satisfaction of members.

• Journal of Home Health Care Nursing
• /
• v.6
• /
• pp.46-58
• /
• 1999

The purpose of this research was to find out the state of the nursing performance of the home care nurses in Seoul in order to provide the data for the practical work guide. The data were collected from fifty home care nurses working in 22 institutions located in Seoul. The research tool used for this research was modified and tested by Song Jong-Rye(1999) which was originally modified the standard tool of American Nurses Association (1998) and was partly supplement and adjusted for this research. The reliability of this tool was Cronbach's $\alpha$=.0982. The collected data were statistically processed using SAS for t-test, ANOVA. $Scheff\'{e}$ test. Among the surveyees, 50% have been working as a home care nurse more than three years and 74.0% of them were married. And 52% have B.S degree with certification of home care nurse from the certification program for Home Care Nurses affiliated at nursing schools. Half of the home care nursing organizations were based on the general hospitals, and most(78%) of the responsible senior personnels of those organizations were nurses. The following results are drawn from this research. 1) The level of nursing performance by the task sectors General performance level of home care nurses was relatively high in grade of 3.06 from total 4.00. Among the task sectors. the ethical field scored the highest points, and the next were nursing intervention, professional training, and data gathering, and the research sector scored the lowest point. 2) The level of nursing performance by general features of home care nurses Statistically relevant correlation between performance according to the duration of working experience as a nurse(p=0.8951) and performance according to the duration of working as home care nurse(p=0.2263) did not emerge. Also, performance by marriage status(p=0.2218), education(p=0.5733), and taking the certification program for home card nurse(p =0.1560) has no statistically meaningful correlation. 3) The level of nursing performance by the type of home care nursing organizations There exists a significant difference(p=0.002) between performances by the types of organizations. Most of the responsible senior personnels of the home care nursing organization were nurses. The level of nursing performance of the home care nursing organization under nurse management was relatively higher than that of home care nursing organizations led by medical doctors or non-medical professional, but this was not proved as statistically meaningful(p =0.3617). 4) The level of nursing performance by task sectors according to the characteristic of home care nursing service organization There exists a significant difference between nursing performances by task sectors according to the characteristics of home care nursing organization(p=0.002). In case of model research center of one College of Nursing, the nursing performance in the sectors of organization, theory, and data gathering were lower than that of in hospital based home care nursing service. And in case of local home care centers, performances in sectors of organization, theory, data gathering, nursing intervention. professional training, and research sectors were significantly low. Based on the obtained results, overall performance of home care nurses can be appraised as relatively good. Especially, performances in sectors of the nursing intervention, nursing plan. and data gathering including the in direct nursing were recorded high scores. From this, it can be concluded that high quality of nursing is relatively practicing for home patients at these days. Since the high quality of nursing for patients was directly related to the level of nursing performances of home care nurses, it is required to improve practical performance level of them by making constant evaluation and running continual education program and supplementing curriculum for the sectors with low scores.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.21-28
• /
• 2017

Practical models for FPGA architectures which include performance- and/or density-enhancing components such as carry chains, wide function multiplexers, and memory/multiplier blocks are being applied to academic FPGA placement tools which used to rely on simple imaginary models. Previously the techniques such as pre-packing and multi-layer density analysis are proposed to remedy issues related to such practical models, and the wire length is effectively minimized during initial analytic placement. Since timing should be optimized rather than wire length, most previous work takes into account the timing constraints. However, instead of the initial analytic placement, the timing-driven techniques are mostly applied to subsequent steps such as placement legalization and iterative improvement. This paper incorporates the timing driven techniques, which check if the placement meets the timing constraints given in the standard SDC format, and minimize the detected violations, with the existing analytic placer which implements pre-packing and multi-layer density analysis. First of all, a static timing analyzer has been used to check the timing of the wire-length minimized placement results. In order to minimize the detected violations, a function to minimize the largest arrival time at end points is added to the objective function of the analytic placer. Since each clock has a different period, the function is proposed to be evaluated for each clock, and added to the objective function. Since this function can unnecessarily reduce the unviolated paths, a new function which calculates and minimizes the largest negative slack at end points is also proposed, and compared. Since the existing legalization which is non-timing driven is used before the timing analysis, any improvement on timing is entirely due to the functions added to the objective function. The experiments on twelve industrial examples show that the minimum arrival time function improves the worst negative slack by 15% on average whereas the minimum worst negative slack function improves the negative slacks by additional 6% on average.

• The Journal of Art Theory & Practice
• /
• no.14
• /
• pp.53-83
• /
• 2012

This thesis is a study of artistic measures and climate refugees, based on Hack's World Climate Refugee Camp project. According to Hack, climate refugees appeared with the process of globalization. Hack claimed that the people who put climate refugees in danger are the industrialized nations, and therefore, their rejection of refugees is nonsense. He also stated that the fundamental solution would be the active participation of such nations. Thus, he travels around the world, encouraging participants and globalizing his project. Interestingly, the practical participation method of his climate calamity project is divided into four methods, which are all related to realizing the danger and presenting various solutions. First, the aesthetic of survival: the reason Hack focused on the warming trend and claimed that we have to accept the climate refugees as refugees comes from the thought that we are all potential refugees, and the anxiety that climate refugees may cause war in the end. The solution Hack found for surviving in such a world is to create "refugee camps" to notify people about the seriousness of climate change, and to put the "aesthetic for survival" in action. Second, a relation-oriented relationship: communication between Hack and the participants was done in various ways. They are experiencing a bond and emotions of an interrelationship through their actions in the experimental field, experiencing a new form of art, which they were not able to experience in a museum. Third, a utopian measure: Hack's utopian measure started from the fear of dystopia but Hack still believes that it is not only a dream, but that it can be realized. He claims that even though the start may be feeble, it is possible to rescue children from starvation and to treat climate refugees as proper human in the end, when communication and cooperation is done the right way and properly. Fourth, the aesthetic of global relation, the internet: the new solution Hack is trying on the internet is to make more people participate in his project. It is fate that "human are the wrongdoer and the victim at the same time", but according to Hack's opinion, social disaster can be avoided through effort and it is optimistic that we can give form to the culture revolution we are experiencing now. Hack's project illustrated the importance of daily life, compared to art inside a museum, through active participation of the people and opened up a new method of art through realistic responses to disasters. This is distinctive from the past exhibitions, where artists gave shape and form to ideals and an imaginary world, in that it shows that the artist and audience aim for creating a community-like structure, just like Bourriaud's art method. Hack's project of climate calamity illustrates that installation and action art is not only an art genre which shows installation and activities, but that it can include social and political issues and that it can be completed with the help of participants, consequently becoming a genre of modern art. Hack raises a question about art's identity through various descriptions. Artists as planners, who base their artworks on their subjectivity or the characteristics of a specific period, the people as participants, the duet of art work and play, human and human, and further, human and nature. The practical participation method, as a measure for "disaster", reveals the new art of the 21st century within Hack's artworks. Even though there are several problems with Hack's usage of art as a measure for disaster, it will actively open up a new page for the 21st century's art with the theme of disaster.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.93-107
• /
• 2014

In this paper, we report what we have observed with regard to user-perspective issue clustering based on multi-layered two-mode network analysis. This work is significant in the context of data collection by companies about customer needs. Most companies have failed to uncover such needs for products or services properly in terms of demographic data such as age, income levels, and purchase history. Because of excessive reliance on limited internal data, most recommendation systems do not provide decision makers with appropriate business information for current business circumstances. However, part of the problem is the increasing regulation of personal data gathering and privacy. This makes demographic or transaction data collection more difficult, and is a significant hurdle for traditional recommendation approaches because these systems demand a great deal of personal data or transaction logs. Our motivation for presenting this paper to academia is our strong belief, and evidence, that most customers' requirements for products can be effectively and efficiently analyzed from unstructured textual data such as Internet news text. In order to derive users' requirements from textual data obtained online, the proposed approach in this paper attempts to construct double two-mode networks, such as a user-news network and news-issue network, and to integrate these into one quasi-network as the input for issue clustering. One of the contributions of this research is the development of a methodology utilizing enormous amounts of unstructured textual data for user-oriented issue clustering by leveraging existing text mining and social network analysis. In order to build multi-layered two-mode networks of news logs, we need some tools such as text mining and topic analysis. We used not only SAS Enterprise Miner 12.1, which provides a text miner module and cluster module for textual data analysis, but also NetMiner 4 for network visualization and analysis. Our approach for user-perspective issue clustering is composed of six main phases: crawling, topic analysis, access pattern analysis, network merging, network conversion, and clustering. In the first phase, we collect visit logs for news sites by crawler. After gathering unstructured news article data, the topic analysis phase extracts issues from each news article in order to build an article-news network. For simplicity, 100 topics are extracted from 13,652 articles. In the third phase, a user-article network is constructed with access patterns derived from web transaction logs. The double two-mode networks are then merged into a quasi-network of user-issue. Finally, in the user-oriented issue-clustering phase, we classify issues through structural equivalence, and compare these with the clustering results from statistical tools and network analysis. An experiment with a large dataset was performed to build a multi-layer two-mode network. After that, we compared the results of issue clustering from SAS with that of network analysis. The experimental dataset was from a web site ranking site, and the biggest portal site in Korea. The sample dataset contains 150 million transaction logs and 13,652 news articles of 5,000 panels over one year. User-article and article-issue networks are constructed and merged into a user-issue quasi-network using Netminer. Our issue-clustering results applied the Partitioning Around Medoids (PAM) algorithm and Multidimensional Scaling (MDS), and are consistent with the results from SAS clustering. In spite of extensive efforts to provide user information with recommendation systems, most projects are successful only when companies have sufficient data about users and transactions. Our proposed methodology, user-perspective issue clustering, can provide practical support to decision-making in companies because it enhances user-related data from unstructured textual data. To overcome the problem of insufficient data from traditional approaches, our methodology infers customers' real interests by utilizing web transaction logs. In addition, we suggest topic analysis and issue clustering as a practical means of issue identification.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.3
• /
• pp.179-200
• /
• 2008

This study is aimed at contributing to the future development of Home Economics Education Department by suggesting basic data of TQM(Total Qualify Management) for evaluating TQM of Home Economics Education Departmeut in education colleges. A survey was conducted involving all junior(3rd year) students of Home Economics Education Department in education colleges either by making a visit to 3 different schools or by sending it in the mail to 10 different schools. Responding answer-sheets, 302 copies(88.3%) out of 342 copies in total were returned. Finally, we used 285 copies(83.3%) as data for analysis. The results of this study are as follows: In terms of Professional Qualification of Home Economics Teachers, the students had passion for their Home Economics Education and also had a great pride and mission to be future Home Economics teachers. However, their ability proved to be poor and low in presenting a vision for Home Economics, in conducting extra-curricular activities, and the computer skills. In the case of college students, their satisfaction showed an average point 3.15 on a scale of 5. Those students who entered school voluntarily or those who hoped for re-entrance showed more satisfaction than those who entered school with good academic records or those who do not hope for re-entrance into school. In terms of professors' leadership, Students are perceived to choose 'Transactional Leadership' instead of 'Transformational Leadership'. Students', who have higher satisfaction and hopes for re-entrance, perception level about their professors' leadership style showed higher satisfaction than average. The students empowerment level showed average point 3.52, which is considered relatively high. Students at the college where professors majored in Home Economics Education are employed showed higher empowerment level than students at the college with professors who did not major in Home Economics Education. The result of evaluating general demand for renovating of Home Economics Education Dept. showed that: they perceived the "Teacher Education Course" of Home Economics Education Dept. as in need of cultivating practical skills in secondary school. They also said, "Teaching Method" is in great need of renovation. In the case of teaching method, they preferred laboratory work, and practical training. In earning credits, they emphasized the importance of faithfully completing the "Study of Content". For the Subject Matter Education, they required a training course to be set up in the secondary school. Finally they claimed that the teachers and students need to take the initiative in developing a Curriculum of Home Economics Education Dept. Based on the findings mentioned above, I would like to suggest further research on how to adopt and evaluate TQM in Home Economics Education, and faculty-centered evaluation methods. I also would like to suggest to vitalize quality research through the form of narrative research.

• Journal of Climate Change Research
• /
• v.5 no.2
• /
• pp.95-107
• /
• 2014

The 'Green Start Movement' is a practical movement of green living to efficiently reduce the greenhouse gases originating from non-industrial fields such as household, commerce, transportation, etc. for the 'materialization of a low carbon society through green growth (Low Carbon, Green Korea)'. When the new government took office, following the Lee Myeongbak Administration that had presented 'Low Carbon, Green Growth' as a national vision, it was required to set up the direction of the practical movement of green life to respond to climate change persistently and stably as well as to evaluate the performance of the green start movement over the past 5 years. A questionnaire survey was administered to a total of 265 persons including public servants, members of environmental and non-environmental NGOs, participants of the green start movement and professionals. In the results of the questionnaire survey, many opinions have indicated that the awareness of the green start movement is increasing and the green start movement has had a positive impact on individual behavior and group behavior in terms of green living. The result shows, however, that the environmental NGOs don't cooperate sufficiently to create a 'green living' effect on a national scale. Action needs to be taken on the community level in order to generate a culture of environmental responsibility. The national administration office of the Green Start Movement Network should play the leading role between the government and environmental NGOs. The Green Start National Network should have greater autonomy and governance of the network needs to be restructured in order to work effectively. Also the Green Start Movement should identify specific local characteristics to support activities that reduce greenhouse gas emissions. Best practices can be shared to reduce greenhouse gas emissions by a substantial amount.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.334-346
• /
• 2022

There is a lack of knowledge and information on the understanding and application of the Process Safety Management (PSM) system, recognized as a major cause of industrial accidents in small-and medium-sized workplaces. Hence, it is necessary to prepare a protocol to secure the practical and continuous levels of implementation for PSM and eliminate human errors through tracking management. However, insufficient research has been conducted on this. Therefore, this study investigated and analyzed the various violations in the administrative measures, based on the regulations announced by the Ministry of Employment and Labor, in approximately 200 small-and medium-sized PSM workplaces with fewer than 300 employees across in korea. This study intended to contribute to the prevention of major industrial accidents by developing a facility maintenance web program that removed human errors in small-and medium-sized workplaces. The major results are summarized as follows. First, It accessed the web via a QR code on a smart device to check the equipment's specification search function, cause of failure, and photos for the convenience of accessing the program, which made it possible to make requests for the it inspection and maintenance in real time. Second, it linked the identification of the targets to be changed, risk assessment, worker training, and pre-operation inspection with the program, which allowed the administrator to track all the procedures from start to finish. Third, it made it possible to predict the life of the equipment and verify its reliability based on the data accumulated through the registration of the pictures for improvements, repairs, time required, cost, etc. after the work was completed. It is suggested that these research results will be helpful in the practical and systematic operation of small-and medium-sized PSM workplaces. In addition, it can be utilized in a useful manner for the development and dissemination of a facility maintenance web program when establishing future smart factories in small-and medium-sized PSM workplaces under the direction of the government.