• Journal of Information Technology Applications and Management
• /
• v.16 no.4
• /
• pp.205-222
• /
• 2009

Considering time-lag in the performance evaluation of information system (IS) investment is important because its effect reveals after certain period of time passed. Particularly it is more in the systems of e-government informatization projects which the amount of investment and the scale of business are huge. Many methods to solve this issue have been proposed such as system dynamics methods, simulations, structural equations etc. However, it is still difficult and unsolved problem because collecting practical data for time-lag analysis is very hard. In this paper, we analyze IS time-lag effect through factor analysis using the accumulated practical operational DB data. For the performance evaluation of the G4C system, the representative e-government web portal, we selected eleven factors reflecting time passing in G4C DB data. With these factors this paper conduct time-lag analysis in four view points. First, we conducted 'Stabilizing of G4C system' and got a result that IS is needed about three years for the stabilization. Second, we conducted 'Utilization of G4C system' and got a result that the utilization reaches appropriate level after in three years later after the introduction of G4C system. Third, we conducted 'Cost reduction effect' and got a result that cost reduction is stable in the third year after the introduction of G4C system. Lastly, we conducted 'System maturity effect' and got a result that the system reaches to the quality level that users expect after third to fourth years. According to the results of this research, we found that performance of IS improv continuously not immediately, and it needs three or four years of time-lag.

• The Korean Journal of Franchise Management
• /
• v.2 no.1
• /
• pp.119-133
• /
• 2011

The objective of this study is to establish the basic concepts for franchise agreements in consideration of both theoretical and practical conditions, to set the parameters for the discussion regarding the practical business matters pertaining to franchise agreements, and to analyze the criteria for determining the illegality of unfair trade practices based on research into actual practices in franchise transactions and on case studies of the implementation of laws by the Fair Trade Commission. The study aims to thereby contribute to the stabilization of laws in franchise transactions, benefiting all parties including franchise-related institutions, participants in franchise transactions, and related consumers. In conclusion, even in cases where regulatory exceptions are applied within the Fair Franchise Transactions Act when determining the illegality of franchised businesses, it is impossible to eliminate illegality unless all necessary and sufficient conditions have been included, and even if the procedure for evading illegality has been undertaken, illegality may not be eliminated unless the contents thereof are legitimate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.1
• /
• pp.1162-1170
• /
• 2001

This paper proposes a practical gain-scheduling control law considering robust stability and performance of Linear Parameter Varying(LPV) systems in the presence of nonlinearities and uncertainties. The proposed method introduces LMI-based pole placement synthesis and also associates with a recently developed fuzzy control system based on Takagei-Sugenos fuzzy model. The sufficient conditions for robust controller design of linearized local dynamics and robust stabilization of fuzzy control systems are reduced to a finite set of Linear Matrix inequalities(LMIs) and solved by using co-evolutionary algorithms. The proposed method is applied to the longitudinal acceleration control of high performance aircraft with linear and nonlinear simulations.

• Journal of the Korean housing association
• /
• v.13 no.6
• /
• pp.1-10
• /
• 2002

As the elderly population increases, concerns for the elderly's welfare become greater both quantitatively and qualitatively. In order to give a chance for the elderly to live in familiar dwelling and regional context to which they are accustomed, and to participate in their society actively, it is of great importance that suitable living spaces must be provided for the elderly. The practical ways of providing people with good living environment and its easy maintenance for healthy and valuable lives were discussed in this paper. This research is designed to propose pertinent policies related to social issues concerning the elderly. 137 seniors over 60 living in Gwanaju city were sampled and surveyed. The scope of planning for the elderly's lifestyle and welfare is divided into two parts, one is planning of space for the realization of stable and spacious dwellings and another is urban environment planning capable of supporting healthy and affluent lifestyles. Also, the realization of stable housing, the construction of urban structure for a healthy life, and the provision of barrier-free living conditions are investigated. For increasing the degree of stabilization and improvement for the elderly's life, self-governing bodies should grasp the demands of living condition and spatial requirements by taking the lifestyles of the elderly into account in urban or regional levels. Then, a master plan including development, improvement, execution, and maintenance of proper housing facilities and urban environments should be made for the best results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.395-402
• /
• 2000

This paper presents the improvement for speed characteristics of a Brushless DC Motor (BLDCM), it was applied to digital PI control for this. The practical PID control has been widely used to velocity control of DC motors. In this paper, a digital PI controller is used in order to decrease the speed error in constant velocity control of BLDCM. A TMS320C31 DSP is used for the microprocessor of digital PI control. The method using the DSP carry out the real-time control. The DSP has the rapid calculation ability and sampling time used lms. Driving BLDCM used 50W, motor input DC 150V and rotation speed 3000rpm. When BLDCM is to approval for discretion velocity at the acceleration and deceleration driving with any load, it was a feasible for stabilization control. Therefore, the experimental results indicate the superiority and validity of the velocity control by digital PI control.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.15-23
• /
• 2007

In surveillance, monitoring, and target tracking operations, high-resolution images should be obtained even if the target is in a far distance. Frequent movements of vehicles such as boats degrade the image quality of onboard camera systems. Therefore, stabilizer mechanisms are required to stabilize the line of sight of boatboard camera systems against boat movements. This paper addresses design and implementation of a strapdown boatboard camera stabilizer. A two degree of freedom(DOF)(pan/tilt) robot performs the stabilization task. The main problem is divided into two subproblems dealing with attitude estimation and attitude control. It is assumed that exact estimate of the boat movement is available from an attitude estimation system. Estimates obtained in this way are carefully transformed to robot coordinate frame to provide desired trajectories, which should be tracked by the robot to compensate for the boat movements. Such a practical robotic system includes actuators with fast dynamics(electrical dynamics) and has more degrees of freedom than control inputs. Backstepping method is employed to deal with this problem by extending the control effectiveness.

• Carbon letters
• /
• v.10 no.4
• /
• pp.329-334
• /
• 2009

In this work, the effect of carbon nanofibers (CNFs) addition on physicochemical characteristics of CNFs-reinforced epoxy matrix nanocomposites was studied. Poly(amide imide) solutions in dimethylformamide were electrospun into webs consisting of $250{\pm}50$ nm fibers which were used to produce CNFs through stabilization and carbonization processes. As a result, the CNFs with average diameter of $200{\pm}20$ nm were obtained after carbonization process. The nanocomposites with CNFs showed an improvement of thermal stability parameters and fracture toughness factors, compared to those of the specimen without CNFs, which could be probably attributed to the higher specific surface area and larger aspect ratio of CNFs, resulting in improving the mechanical interlocking in the nanocomposites. Also, the applied external loading can effectively transfer to CNFs because strong interactions are resulted between the epoxy matrix and the CNFs.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.453-458
• /
• 2000

The paper describes a study of the variation of the NO production emitted from turbulent propane flames established on a practical combustor where a primary and a secondary fuel lines are installed. The flowrate of the secondary fuel is pulsated or added in addition to that of the primary fuel which constrantly flows to the nozzle of the burner. Two modes depending on the positions of supplying the secondary fuel are performed; one is for its position to be placed at the center of the primary fuel tube and the other around the stabilization baffle. The mean concentrations of gas species, $O_2,\;Co\;CO_2,\;NO$, and HC(unburnt hydrocarbones) have been measured at the exit of the combustor. As equivalence ration $({\Phi})$ is increased the profile of the NO concentration on the latter mode rises slowly less than that on the former one. In the range of ${\Phi}=0.5$ to 0.54 the NO production is reduced by about 35% more on the latter mode than on the former one. The influence of pulsating the secondary fuel on the variation of the NO concentration doesn't appear at both modes.

• Journal of Family Resource Management and Policy Review
• /
• v.11 no.4
• /
• pp.73-92
• /
• 2007

This study explored the integration-support paradigm for transnational marriages and families as a well-grounded service model supporting a transnational family of immigrants in Korea at a time when Korean society showed increased interest in interracial marriages. The research mainly focused on the Dongdaemun-gu Transnational Marriage and Family Support Center, utilizing the relative actual practice at the center and the secondary data of previous studies. The findings were as follows: The integration-support paradigm for transnational marriage and family comprised of the following elements : the institutionalization of welfare and medical services; the systematization of legal institution and execution the settlement of mid- and long-term policies and the practical programs of the government proper approaches to the formation of a healthy marital couple and family relations; total services related to rearing and educating children properly including education cost support to family incomehousing for the stabilization of family life support for socio-cultural exchanges within the family : as well as the radical conversion of social recognition of a transnational family. This paradigm is expected to be a well-grounded service for the integration-support of transnational families.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.113-120
• /
• 2011

Fins are widely used for roll stabilization of passenger ferries and high performance naval ships, among others. The Coanda effect is noticeable when a jet stream is applied tangentially to a curved wing surface since the jet can augment the lift by increasing the circulation. The Coanda effect has been found useful in various fields of aerodynamics and speculated to have practical applicability in marine hydrodynamics where various control surfaces are used to control motions of ships and the other offshore structures. In the present study, numerical computations have been performed to find proper jet momentum coefficients $C_j$ and trailing edge shapes suitable for the application of the Coanda effect to a stabilizer fin. The results show that the lift coefficient of the modified Coanda fin at the zero angle of attack ${\alpha}$ identically coincides with that of the original fin at ${\alpha}\;=\;25^{\circ}$ when Coanda jet is supplied at the rate of $C_j$ = 0.1. It is also shown that a fixed type fin stabilizer utilizing the Coanda effect can be implemented without changing the fin angle to actively control the motions of ships and the other offshore structures.