• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1522-1528
• /
• 2007

Electric Power cable is the apparatus that receives electric power from the Korea Electric Power Corporation and supplies electric power to electric train and annex facilities of each railway station. With substantial ripple effect during power blackout accidents, such power blackout accidents must be coped with by discriminating the status of insulation deterioration of electric power cable in advance. Discrimination of insulation deterioration of the electric power cable is normally executed while the power is disconnected and it is very difficult to discover, at early stage, the insulation deterioration of the power cable in operational state since the duration of inspection is limited. This research aims to consider method of diagnosing the insulation deterioration of electric power cable in On-Line state rather than diagnosis in Off-Line state in order to secure reliability of power supply by reducing duration of power blackout (accidental blackout and blackout during works) and by seeking reduction in equipment and manpower used in diagnosis of deterioration through prevention of the accident itself prior to occurrence through early restoration of accident due to insulation deterioration of the electric power cable and assessment of performance of the cable under operation.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.437-439
• /
• 1991

This paper deals with the development of computer programs that can be used for fuse and relay coordination in power station and also with the characteristics of these protective devices. The coordination of protective devices is determined by caculation from the lowest voltage level back to the power source. The minimum time difference between two different characteristics on the time- current curves is determined by the Golden Section searching routine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.69-72
• /
• 1998

A study to identify the energized status of the 22.9kV underground power cable by the detection of vibration was reformed. We derived that there exists vibration at double the line frequency in live cables by electromagnetic force. The vibration can be picked up by accelerometer sensor. A prototype was tested on the underground distribution system in Chonan Station, KEPCO. The results are presented and suggest the applicability of the detecting device.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2292-2294
• /
• 2004

At satellite communication system for flood forecasting and warning, VSAT system needs to good performance for aquisition of rainfall and water-level data. But, it has difficult for obtaining good performance because of the rainfall attenuation. Thus, in this paper, we introduced the efficiency plan of the transmission power control for Mini-Hub Station.

• KCID journal
• /
• v.5 no.1
• /
• pp.20-31
• /
• 1998

The Power transformation, the modified Power transformation, the logarithmic transformation, the square-root logarithmic transformation, the SMEMAX transformation, the Extreme value type III, the Weibull, the log Pearson type III, the lognormal distributi

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.737-739
• /
• 1998

This presentation describes an experiment to intergrated control, protection and measurement system configulation at KOWACO's Yongdam hydro-power station currently constructed by discrete electronic and electromechenical devices. The experiment is designed to exploit existing microcomputer technologies, digital signal processors, m/w&fiber optic communications. The theory of operation and advantages of the intergrated approach are discussed.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.94-99
• /
• 2013

This paper presents some experimental results about Position Mooring (PM) system applied to the barge ship. In PM operation, the station keeping in surge, sway of vessel is provided by the mooring system. In this paper, a system, consisting of a barge vessel and mooring lines, is mathematically modeled. The position and orientation of vessel is controlled by changing the tensions in the mooring lines. The PID control strategy is applied to evaluate the efficiency of proposed system. Experimental result which corresponds to the applied control strategy is presented and discussed.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2443-2445
• /
• 2000

In this paper, the Intergrated SCADA is used to computer systems designed to perform the following functions for power plant. - to collect data from industrial plant devices or transducers - to process and perform calculations on the collected data - to present collected and derived data on displays on MMI - to accept commands entered by human operators and act on them such as sending control commands to plant devices. This system is characterised by open architectured that is based on the internationally recognized industrial standard for industrial automation control language, the IEC 1131-3

• International Journal of Contents
• /
• v.18 no.1
• /
• pp.76-84
• /
• 2022

Tidal power generation plays a critical role in reducing greenhouse gas emissions. It uses a tidal force generated by gravitational force between the moon, the earth, and the sun. The change of seawater height generates the tide-generating force, and the magnitude of the change is the tide level. The tide level change has the same period as the tide-generating force twice a day, every 29.5 days, every year, and every 18.6 years. Sihwa Lake Tidal Power Station is Korea's first tidal power plant that began commercial power generation in August 2011 and has been accumulating a large volume of data on electricity production, power generation sales, sluice displacement, and tide levels. The purpose of this paper was to analyze the impact of the inefficiency factors affecting production and the tidal level change on tidal power generation and their characteristics using Sihwa Lake Tidal Power's operational performance data. Throughout this paper we show that tidal power generating operation is accurately predicting the trends of magnitude of tidal force to be periodical for each day. determining the drop to initiate the water turbine generator factoring the constraints on the operation of Sihwa Lake, and reflecting the water discharge through the floodgate and water turbine during the standby mode in the power generation plan to be in the optimal condition until the initiation of the next power generation can maximize power generation.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.2 s.3
• /
• pp.39-45
• /
• 1999

Pumped-storage power plants pumps the water from the lower reservoir to the upper reservoir using the extra electric power at night and generates electric power in the daytime. Currently it tends to be a high-head large-capacity machine. In this paper, we developed the computer programs for vibration analysis of the pump/turbine and generator/motor rotor system considering electromagnetic force, hydrodynamic unbalance force, dynamic characteristics of guide bearings and add mass of water. This program was verified by applying it to the real model and calculating the critical speed, natural mode and unbalance response.