• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.159-179
• /
• 2022

Often a network becomes complex, and multiple entities would get in charge of managing part of the whole network. An example is a utility grid. While the entire grid would go under a single utility company's responsibility, the network is often split into multiple subsections. Subsequently, each subsection would be given as the responsibility area to the corresponding sub-organization in the utility company. The issue of how to make subsystems of adequate size and minimum number of interconnections between subsystems becomes more critical, especially in real-time simulations. Because the computation capability limit of a single computation unit, regardless of whether it is a high-speed conventional CPU core or an FPGA computational engine, it comes with a maximum limit that can be completed within a given amount of execution time. The issue becomes worsened in real time simulation, in which the computation needs to be in precise synchronization with the real-world clock. When the subject of the computation allows for a longer execution time, i.e., a larger time step size, a larger portion of the network can be put on a computation unit. This translates into a larger margin of the difference between the worst and the best. In other words, even though the worst (or the largest) computational burden is orders of magnitude larger than the best (or the smallest) computational burden, all the necessary computation can still be completed within the given amount of time. However, the requirement of real-time makes the margin much smaller. In other words, the difference between the worst and the best should be as small as possible in order to ensure the even distribution of the computational load. Besides, data exchange/communication is essential in parallel computation, affecting the overall performance. However, the exchange of data takes time. Therefore, the corresponding consideration needs to be with the computational load distribution among multiple calculation units. If it turns out in a satisfactory way, such distribution will raise the possibility of completing the necessary computation in a given amount of time, which might come down in the level of microsecond order. This paper presents an effective way to split a given electrical network, according to multiple criteria, for the purpose of distributing the entire computational load into a set of even (or close to even) sized computational loads. Based on the proposed system splitting method, heavy computation burdens of large-scale electrical networks can be distributed to multiple calculation units, such as an RTDS real time simulator, achieving either more efficient usage of the calculation units, a reduction of the necessary size of the simulation time step, or both.

• Analyses & Alternatives
• /
• v.7 no.3
• /
• pp.1-26
• /
• 2023

This article will analyze and forecast important variables and dynamics in global power politics after the war in Ukraine. It tries to use several perspectives to analyze international relations, particularly liberal internationalism and structural realism. In short, core variables are as follows; First, how is the US-led liberal international order and globalization being adjusted? Second, how will the U.S.-China strategic competition, which is the biggest and structural variable, cause changes in the international order in the future? The third variable, how stable are Sino-Russia relations in the context of a structuring U.S.-China-Russia strategic new triangle? Fourth, to what extent will third middle hedging states outside the U.S. and China be able to exercise strategic autonomy in the face of multipolarization? To summarize, the first of these four variables is the largest basic variable at the global political and economic level in terms of its impact on the international community, and it has been led by the United States. The second variable, in terms of actors, seems to be the most influential structural variable in global competition, and the US-China strategic competition is likely to be a long game. Thus the world will not be able to escape the influence of the competition between the two global powers. For South Korea, this second variable is probably the biggest external variable and dilemma. The third variable, the stability of Sino-Russia relations, determines balance of global power in the 21st century. The U.S.-China-Russia strategic new triangle, as seen in the current war in Ukraine, will operate as the greatest power variable in not only global power competition but also changes in the international order. Just as the U.S. is eager for a Sino-Russia fragmentation strategy, such as a Tito-style wedge policy to manage balance of power in the early years of the Cold War, it needs a reverse Kissinger strategy to reset the U.S.-Russia relationship, in order to push for a Sino-Russia splitting in the 21st century. But with the war in Ukraine, it seems that this fragmentation strategy has already been broken. In the context of Northeast Asia, whether or not the stability of Sino-Russia relations depends not only on the United States, but also on the Korean Peninsula. Finally, the fourth variable is a dependent variable that emerged as a result of the interaction of the above three variables, but simultaneously it remains to be seen that this variable is likely to act as the most dynamic and independent variable that can promote multilateralism, multipolarization, and pan-regionalism of the global international community in the future. Taking into account these four variables together, we can make an outlook on the change in the international order.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.297-302
• /
• 2015

Replacing a manual switch installed in a feeder for a distribution system with an automatic one increases the reliability of the electric power system. This is because the automatic switch can shorten the duration of a fault the customer experiences by splitting the faulty section faster than the manual one does. However, improving the reliability of the distribution system may increase investment costs. Here, the investment costs include automatic switch cost, replacement work cost and labor cost. For this reason, importance should be attached to the proper balance between the increase of the investment costs and the improvement of the reliability of the distribution system. This article analyzed reliability index and economics when manual switches installed in a feeder (RBTS Bus2 model) was replaced by automatic ones. In addition, it attempted to draw the optimum rate of automation of manual switches by automatic ones using the GRG optimization method, considering the current economic requirements.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.7-12
• /
• 2004

An improved extraction method considering ac current crowding effect is investigated to determine intrinsic ( $C_{\mu}$) and extrinsic ( $C_{\mu}$) base-collector capacitances of bipolar junction transistors separately. The drawbacks of conventional methods are pointed out, and the improved extraction equations are derived from a cutoff mode equivalent circuit with the ac crowding capacitance. The frequency response curves of modeled current and power gains using the extracted values of $C_{\mu}$ and $C_{\mu}$ have much better agreements with measured ones than those of the conventional methods, verifying the accuracy of the improved technique.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.28-30
• /
• 2001

We studied the flux-flow current-voltage characteristics of microwave-generated fluxons formed in serially stacked intrinsic Josephson junctions fabricated on$ HgI_2$-intercalated $Bi_2$$Sr_2$$CaCu_2$O/8+x/(Bi2212) single crystals. With increasing the irradiation power of 73$\square$76 GHz microwave, the supercurrent branch became resistive and split into multiple sub -branches. Each sub-branch represented a specific mode of collective motion of Josephson fluxons. We also observed similar branch splitting In a mesa prepared on an underdoped Bi2212 single crystal in a static magnetic field.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.96-106
• /
• 1998

수평 전기로에서 AgInS2 다결정을 합성하여 HWE 방법으로 AgInS2 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. AgInS2 단결정 박막은 증발원과 기판의 온도를 각각 680℃, 410℃로 성장하였다. 이때 단결정 박막의 결정성이 10 K에서 측정한 광발광 스펙트럼은 597.8 nm(2.0741 eV) 근처에서 엑시톤 방출 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 121 arcsec로 가장 작게 측정되어 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 9.35×1023개/㎥, 2.94×10-2㎡/V·s였다. AgInS2 단결정 박막의 광전류 단파장대 봉우리들로부터 10 K에서 측정된 ΔCr(crystal field splitting)은 0.15eV, ΔSo(spin orbit coupling)는 0.0089 eV였다. 광전도 셀로서 응용성을 알아보기 위해 감도(γ), pc/dc(photocurrent/darkcurrent), 최대허용소비전력(maximum allowable power dissipation: MAPD), 응답시간(response time)등을 측정한 결과, S 증기 분위기에 열처리한 광전도 셀의 경우 γ=0.98, pc/dc=1.02×106, MAPD=312 mW, 오름시간(rise time)=10.4 ms, 내림시간(decay time)=10.8 ms로 가장 좋은 특성을 얻었다.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.541-562
• /
• 2015

This paper aims at developing the knowledge on the seismic behavior of dowel beam-to-column connections, typically employed in precast buildings in Europe. Despite the large diffusion of the industrial buildings, a high seismic vulnerability was exhibited by these structures, mostly due to the connection systems deficiencies, during some recent earthquakes (Emilia 2012, Turkey 2011). An experimental campaign was conducted on a typical dowel connection between an external column and a roof beam. In this paper, the performed cyclic shear test is described. According to the experimental results, the seismic response of the system is evaluated in terms of strength, stiffness and failure mechanism. Moreover, the complete damage pattern of the test is described by means of the instrumentations records. The connection failure occurred due to the concrete cover failure in the column (splitting failure). Such a mechanism corresponds to a negligible energy dissipation capacity of the connection, compared to the overall seismic response of the structure. The experimental results are also compared with the results of a similar monotonic shear test, as well as with some literature relationships for predicting the strength of dowel connections under horizontal (seismic) loads.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.5
• /
• pp.27-37
• /
• 2017

In this study, an artificial solar simulator composed of a 2.5 kW Xe-Arc lamp and mirror reflector was used to carry out the solar thermal two step thermochemical water decomposition cycle which can produce high efficiency continuous hydrogen production. Through various operating conditions, the change of hydrogen production due to the possibility of a dual-zone reactor and heat recovery were experimentally analyzed. Based on the reaction temperature of Thermal-Reduction step and Water-Decomposition step at $1,400^{\circ}C$ and $1,000^{\circ}C$ respectively, the hydrogen production decreased by 23.2% under the power off condition, and as a result of experiments using heat recovery technology, the hydrogen production increased by 33.8%. Therefore, when a thermochemical two-step water decomposition cycle is conducted using a dual-zone reactor with heat recovery, it is expected that the cycle can be operated twice over a certain period of time and the hydrogen production amount is increased by at least 53.5% compared to a single reactor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.134-135
• /
• 2006

$AgInS_2$ single crystal thin filmsl was deposited on throughly etched semi-insulator GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $680^{\circ}C$ and $410^{\circ}C$ respectively, and the thickness of the single crystal thin films is $6{\mu}m$. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $AgInS_2$ single crystal thin film, we have found that the values of spin orbit coupling ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 0.0098 eV and 0.15 eV at 10 K, respectively. In order to explore the applicability as a photoconductive cell, we measured the sensitivity ($\gamma$), the ratio of photocurrent to darkcurrent (pc/dc), maximum allowable power dissipation (MAPD), spectral response and response time. The result indicated that the samples annealed in S vapour the photoconductive characteristics are best. Therefore we obtained the sensitivity of 0.98, the value of pc/dc of $1.02{\times}10^6$, the MAPD of 312 mW, and the rise and decay time of 10.4ms and 10.8ms respectively.

• Journal of Surface Science and Engineering
• /
• v.55 no.2
• /
• pp.63-69
• /
• 2022

Preparing various types of thin films of oxide semiconductors is a promising approach to fabricate efficient photoanodes and photocathodes for hydrogen production via photoelectrochemical (PEC) water splitting. In this work, we investigate the feasibility of an efficient photocathode for PEC water reduction of a p-type oxide semiconductor cupric oxide (CuO) thin film prepared via a facile method combined with sputtering Cu metallic film on fluorine-doped thin oxide (FTO) coated glass substrate and subsequent thermal oxidation of the sputtered Cu metallic film in dry air. Characterization of the structural, optical, and PEC properties of the CuO thin film prepared at various Cu sputtering powers reveals that we can obtain an optimum CuO thin film as an efficient PEC photocathode at a Cu sputtering power of 60 W. The photocurrent density and the optimal photocurrent conversion efficiency for the optimum CuO thin film photocathode are found to be -0.3 mA/cm² and 0.09% at 0.35 V vs. RHE, respectively. These results provide a promising route to fabricating earth-abundant copper-oxide-based photoelectrode for sunlight-driven hydrogen generation using a facile method.