• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6C
• /
• pp.603-613
• /
• 2006

Low-power design is one of the most important challenges encountered in maximizing battery life in portable devices as well as saving energy during system operation. In this paper we propose a low-power DCT (Discrete Cosine Transform) architecture using a modified Computation Sharing Multiplication (CSHM). The overall rate of Power consumption is reduced during DCT: the proposed architecture does not perform arithmetic operations on unnecessary bits during the Computation Sharing Multiplication calculations. Experimental results show that it is possible to reduce power dissipation up to about $7\sim8%$ without compromising the final DCT results. The proposed low-power DCT architecture can be applied to consumer electronics as well as portable multimedia systems requiring high throughput and low-power.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.60-65
• /
• 2017

This paper describes the low noise and low power IC using the opamp sharing technique for the capacitive micro-sensor sensing platform. The proposed IC reduces noise using correlated double sampling (CDS) and reduces power consumption using the opamp sharing technique. The IC is designed to be fully programmable, and can be digitally controlled by serial peripheral interface (SPI). The power consumption and the integrated input referred noise are 1.02 mW from a 3.3 V supply voltage and $0.164aF_{RMS}$ with a bandwidth of 400 Hz. The capacitive sensitivity, the input-output linearity and the figure of merits (FoM) are 2.5 mV/fF, 2.46 %FSO, and 8.4, respectively.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.390-393
• /
• 2007

The reliability as well as the power capability of the UPS system can be increased by replacing a single UPS unit with multiple small UPS units in parallel, resulting in a so-called module UPS. This module UPS system allows that a new module can be added or replaced while maintaining power to loads, which is a hot-swappable operation. In addition, it has desirable features such as ease of output power expandability, convenience of maintenance and repair, and high reliability. To realize the module UPS, load sharing without interconnection among parallel connecting modules as well as a small scale and lightweight topology is necessary. The frequency and voltage droop method is applied to parallel operation control to achieve load sharing. 5kVA modules are designed and implemented to confirm the effectiveness of the proposed approaches. Experimental results show that the module UPS system has a high power factor, a low distortion of output voltage and input current, hot-swappable operations and good load sharing characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5803-5819
• /
• 2017

In this paper, we proposed a contract theory based cooperative spectrum sharing scheme with joint power and bandwidth optimization under asymmetric information, where the primary user (PU) does not know the secondary users' (SUs) private information. To improve performance, PU needs to provide incentives to stimulate nearby SUs to help forward its signal. By using contract theory, PU and SUs' negotiations are modeled as a labor market. PU and SUs act as the employer and employees, respectively. Specifically, SUs provide labor (i.e. the relay power, which can be used for forwarding PU's signal) in exchange for the reward (i.e. the spectrum access bandwidth which can be used for transmitting their own signals). PU needs to overcome a challenge how to balance the relationship between contributions and incentives for the SUs. We study the optimal contract design which consists of relay power and spectrum access bandwidth allocation. We show that the most efficient SUs will be hired by the PU to attend the cooperative communication. PU can achieve the same maximum utility as in the symmetric information scenario. Simulation results confirm that the utility of PU is significantly enhanced with our proposed cooperative spectrum sharing scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2015-2028
• /
• 2016

In this paper, we propose a sum transmission rate maximization based cooperative spectrum sharing protocol with quality-of-service (QoS) support for both of the primary and secondary systems, which exploits the situation when the primary system experiences a weak channel. The secondary transmitter ST_b which provides the best performance for the primary and secondary systems is selected to forward the primary signal. Specifically, ST_b helps the primary system achieve the target rate by using a fraction of its power to forward the primary signal. As a reward, it can gain spectrum access by using the remaining power to transmit its own signal. We study the secondary user selection and optimal power allocation such that the sum transmission rate of primary and secondary systems is maximized, while the QoS of both primary and secondary systems can be guaranteed. Simulation results demonstrate the efficiency of the proposed spectrum sharing protocol and its benefit to both primary and secondary systems.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.741-752
• /
• 2015

This study proposes a new solution for the parallel operation of microgrid inverters in terms of circuit topology and control structure. A combined three-phase four-wire inverter composed of three single-phase full-bridge circuits is adopted. Moreover, the control structure is based on adaptive three-order sliding-mode control and wireless load-sharing control. The significant contributions are as follows. 1) Adaptive sliding-mode control performance in inner voltage loop can effectively reject both voltage and load disturbances. 2) Virtual resistive-output-impedance loop is applied in intermediate loop to achieve excellent power-sharing accuracy, and load power can be shared proportionally to the power rating of the inverter when loads are unbalanced or nonlinear. 3) Transient droop terms are added to the conventional power outer loop to improve dynamic response and disturbance rejection performance. Finally, theoretical analysis and test results are presented to validate the effectiveness of the proposed control scheme.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.294-304
• /
• 2017

This paper proposes a point of common coupling (PCC) voltage compensation method for islanding microgrids using an improved power sharing control scheme among distributed generators (DGs) without communication. The PCC voltage compensation algorithm is implemented in the droop control scheme to reduce the PCC voltage deviation produced by the droop controller itself and the voltage drop on the line impedance. The control scheme of each individual DG unit is designed to use only locally measured feedback variables and an obtained line impedance to calculate the PCC voltage. Therefore, traditional voltage measurement devices installed at the PCC as well as communication between the PCC and the DGs are not required. The proposed control scheme can maintain the PCC voltage amplitude within an allowed range even to some extent assuming inaccurate line impedance parameters. In addition, it can achieve proper power sharing in islanding microgrids. Experimental results obtained under accurate and inaccurate line impedances are presented to show the performance of the proposed control scheme in islanding microgrids.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.394-405
• /
• 2015

This paper considers a wideband cognitive radio network which can simultaneously sense multiple narrowband channels and thus aggregate the detected available channels for transmission and proposes a novel cognitive radio system that exhibits improved sensing throughput and can save power consumption of secondary user (SU) compared to the conventional cognitive radio system studied so far. More specifically, under the proposed cognitive radio system, we study the problem of designing the optimal sensing time and power allocation strategy, in order to maximize the ergodic throughput of the proposed cognitive radio system under two different schemes, namely the wideband sensing-based spectrum sharing scheme and the wideband opportunistic spectrum access scheme. In our analysis, besides the average interference power constraint at primary user, the average transmit power constraint of SU is also considered for the two schemes and then a subgradient algorithm is developed to obtain the optimal sensing time and the corresponding power allocation strategy. Finally, numerical simulations are presented to verify the performance of the two proposed schemes.

• The Southeast Asian review
• /
• v.23 no.1
• /
• pp.1-44
• /
• 2013

This study examined the constitutional engineering of the Philippine democracy in terms of power sharing and accountability, and the effectiveness and stability of the Philippine democracy as a result were assessed. Based on the analysis, the nature of the present Philippine democratic system since 1986 was brought to light. This study argues that the system of power sharing between the President and the congress in the Philippines tends to serve for negotiating political interests among the power elites rather than functioning in a constructive way. And the public accountability system is not functioning as it was designed to do. Due to the defects the Philippine democracy continuously suffers the lack of political effectiveness and stability. Despite of the problem, the reason not to break down the system would be the fact that the system served for the oligarchic power elites to circulate and recreate the political power exclusively. The direction of the Philippine constitutional engineering should be weakening the present traditional elite dominated political system, and strengthening the chances of political participation from the various classes. Some concerned people suggested the constitutional change to parliamentary system in order to strengthening party politics, and federal system to cope with the problems of regional conflicts, but such efforts failed repeatedly due to the conflict of political interests. Considering the present circumstance, it would be advisable to reform political party law and election system in the direction of strengthening political party system, and to expand the scope of local government system in the direction of devolving the centralized political power.

• The Southeast Asian review
• /
• v.23 no.1
• /
• pp.45-87
• /
• 2013

This paper aims to study Thai democratic deepening and the constitutional engineering with the analytical concepts of 'power sharing' and 'accountability' focusing on the 1997 and 2007 Constitution. With regard to power sharing, the 1997 Constitution had the characteristics of majoritarian principle including a two-party system, strengthening of prime minister and the executive's power etc. It enhanced significantly the aspects of accountability compared with the previous constitutions. The institutions such as Constitutional Court, Commission on Election, Administration Court, Commission on Human Right, Ombudsman, Commission on Anti-corruption, and the Measure for Anti-money Laundering were established by the 1997 Constitution. However, such empowered accountability system were often abused by the political power groups in the political process. The 2007 Constitution has the characteristics of consensual principle including a multiparty system, proportional representation system, weakened prime minister's power, balancing of cabinet and parliament's power, pushing ahead with decentralization. However, the consensual principle of the 2007 Constitution came, in part, from the factional interests. It is similar to the 1997 Constitution in terms of accountability system, which enhanced in law but abused often in practice. One of the critical reasons for the failure of the 1997 and 2007 constitutions to consolidate democratic system was the political game played around the so-called network for the monarchy composed by the military, the civilian bureaucracy, Constitutional Court and the privileged classes. The future of the Thai democratic deepening depends on the constitutional engineering in which the factional interests should be excluded, and the rules of power sharing and accountability which traditionally played around the network for the monarchy should be effectively institutionalized.