• 척추신경추나의학회지
• /
• 제7권2호
• /
• pp.39-52
• /
• 2012

Objectives : The purpose of this study was to investigate the correlation between lumbar lordotic angle and the power of trunk flexors, extensors in normal adults Methods : 34 normal participants participated in this study. Their lumbar lordotic angle(L1-S1 Cobb's angle and L1-L5 cobb's angle) was measured by x-ray taken on lateral direction, erect cross-arm position. And muscle power of trunk flexors and extensors of each participant measured using Cybex HUMAC NORM. Results : 1. The average of L1-S1 Cobb's angle was $47.21{\pm}8.88^{\circ}$ and the average of L1-L5 Cobb's angle was $36.32{\pm}9.62^{\circ}$(Table IV). 2. The average ratio of trunk flexors/extensors was $6.44{\pm}19.31%$(Table V). The average power of the trunk flexors was $165.18{\pm}55.05$(Newton-Meter/kg), and the power of trunk extensors was $257.18{\pm}85.53$ (Newton-Meter/kg)(Table VI). 3. Lumbar lordotic angle has no relation to the ratio of trunk flexors/extensors(Table VII, Fig. 4). 4. Lumbar lordotic angle has no relation to both the power of the trunk flexors and extensors(Table VIII, Fig. 5, Fig. 6). Conclusions : These results suggest that the lumbar lordotic angle measured by radiograph could not evaluate the power and ratio of trunk flexors, extensors.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.117-122
• /
• 2009

The wedge type rail clamp compresses the rails with small clamping force at first, and with large clamping force when the wind speed increases because of the wedge working. If the supporter is not installed in the rail clamp with V-type wedge when the wind speed increases more and more, the structure will occur overload which leads the structure to fracture. But in the clamp with U-type wedge the supporter is not necessary because the tangential angle of the wedge increases as the sliding distance increases. The proper shape of U-type wedge is determined by the initial clamping force and the tangential angle of the wedge. Accordingly we, first carry out the finite element analysis in order to analyze the relation between the sliding distance and the wedge angle. Next we suggest the proper shape of U-type wedge as analyze the relation between the radius of curvature and the sliding distance.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.680-683
• /
• 1998

In case of the infinite body containing a rigid inclusion with line crack shape, stress intensity factor is determined and the relation between stress intensity factor and stress distribution near a crack tip is developed. Also, the relation between stress intensity factor and Kolosoff stress function is developed. Finally, these results are compared with those that the crack surface is under no traction.

• 한국보건간호학회지
• /
• 제26권3호
• /
• pp.428-439
• /
• 2012

Purpose: The purpose of this study was to define and clarify the concept of 'equilibrium' in community-dwelling elderly persons with chronic diseases. Methods: A hybrid model was used for development of the concept of equilibrium. The model included a field study conducted in Seoul, Korea. Participants in this study included 12 elderly persons with chronic diseases who were taking medicine regularly. Results: The concept of equilibrium was found to be a complex phenomenon having meaning in two dimensions: the family-friendly and social relation-oriented dimensions. Four attributes and nine indicators were defined. Conclusion: Equilibrium was defined as the state of having health recognition, will power, and motive power (family-friendly dimension) and having a feeling of participation (social relation-oriented). Therefore, nurses who work with elderly persons with chronic disease in the community should be aware of the attributes and indicators of equilibrium in order to enhance the equilibrium of their elderly clients with chronic diseases.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1449-1458
• /
• 1994

A new analytical model which can discribe the relationship between the bridging stress and the crack opening displacement was proposed to investigate the microstructural effect on the R-curve behavior in a polycrystalline alumina. The crack opening displacement according to the distance behind the stationary crack tip was measured using in-situ fracture technique in an SEM, and then used for a fitting procedure to obtain the distribution of bridging stress. The current model and an empirical power law relation were introduced into the fitting procedure. The results indicated that the bridging stress function and R-curve computed by the current model were consistent with those computed by the power law relation. The microstructural factor, e.g., the distribution of grain size, was also found to be closely related to the bridging stress. Thus, this model explained well the interaction effect between the distribution of bridging stress and the local-fracture-controlling microstructure, providing important information for the systematic interpretation of microfracture mechanism including R-curve behavior of a monolithic alumina.

• 동력기계공학회지
• /
• 제7권3호
• /
• pp.69-73
• /
• 2003

In this paper, the relation between displacement of piezoelectric disk and electric field was proposed. From Navier-Stokes equation and Reynold's equation, the relation between flow and gap of plate was determined. This models were further verified by experiments. Based on theoretical study and experimental verification, the proposed model between flow rate and voltage can be used in the design of mass flow controller in gas supplying system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1145-1150
• /
• 2000

Concrete behaves as ductile material at high temperature. The existing stress-strain relationship is not valid at high temperature condition. Thus, stress-strain curve of concrete at high temperature is re-established by modifying Saenz's suggestion in this study. A constitutive model of concrete subjected to elevated temperature is also suggested. The model consists of three components; free thermal stain, mechanical strain and thermal creep strain. As the temperature increase, the thermal creep becomes more critical to the failure of concrete. The thermal creep strain of concrete is derived from the modified power-law relation for the steady state creep. The proposed equation for thermal creep employs a Dorn's temperature compensated time theorem

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.29-43
• /
• 1996

In this paper the recent studies of digital governor for the Diesel Engine in Korea is summarized and that of usage in the marine and land field as of power plant is analyzed for the interest and development of the enterprise with relation with relation to this industrial part. Our investigation shows that until now the studies on the digitl governor are mainly carried out in KMU and land usage for the power plants is increased gradually because reliance of digital governor is improved and system for the maneuvering and monitoring the plants is computerized.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.95-97
• /
• 2007

This paper studies on operating limit curve of low voltage electric machinery with respect to source voltage variation or sag. Also, it discusses electric machine and compensation equipment design methodology based on voltage quality effect assessment technology. Voltage quality standards, such as SEMI47, CBEMA, ITIC curve are regarded to examine the relation between time constants of load and sagging time of sag generator, the load(low voltage electric machinery) study. Voltage sag characteristics of loads, time constant and sag relation voltage-time operating limits are tested and verified.

• 대한임베디드공학회논문지
• /
• 제2권3호
• /
• pp.194-201
• /
• 2007

As the performance of the mobile terminal becomes higher, the power consumption gradually increases. As a result, power management is one of the most important issues in mobile system with battery. In this paper, we describe an DPM(Dynamic Power Management) using DVS(Dynamic Power Management) as a power management mechanism in Qplus operating system. DVS generally considers a specific device such as CPU, whereas we consider the relations with other hardware components as well as each component. We specially focus on the relation between CPU, memory and LCD devices. We also designs a kernel monitor to collect information to decide the policy for power management. According to the experimental results, the proposed method enables to save much power.