• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.412-424
• /
• 2015

The purpose of this study was to analyze the meaning of soul fashion in American pop culture. This study was conducted using a literature research method based on the prior theses, journals and relevant books. Soul as a concept, originated in African-American communities and evolved from the ideology of Black Power, which prompted Black Nationalism. Soul fashion, which took on two styles in African American culture began to embody black resistance and community pride in the late 20th century. One of these, hip-hop style represented the message of resistance and a sense of beauty outside the mainstream. The other, African-inspired fashion, which utilized a look inspired by African tradition, rejected white supremacy by expressing a proud dignity. As a result, the meaning of "soul" in soul fashion represented by American pop culture resulted in contrasting appearance due to different elements. First, one of its meanings is ironic and sarcastic, and it expressed historical trauma, cultural stereotypes, self-hatred, and self-degradation and, the self-mutilation of African-American by cynically distorting their silhouettes and, using modified materials and patterns, fantastic colors, and extraordinary accessories. Second, the other meanings is the pride and dignity of Black Power, which visualized the concentration of ideas implied by the tradition of African-American, through soul fashion by using fierce traditional of African costumes, unique patterns and accessories.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.36-40
• /
• 2017

With an attempt to enhance the visibility of laser beam, we have investigated a black matrix with scattering particles by ray tracing simulations. As the scattering particle density is increased, the detected power by the receiver is increased, thereby enhancing the visibility. In reality, the visibility is reduced with increasing incident angle (away from the normal incidence) of laser beam, a phenomenon also observed by ray tracing simulations. It is due to the fact that the mean path is increased within a highly absorptive BM layer or a smaller number of rays hit the BM area when the incident angle is high. Embedding a number of scattering particles into BM may bring in crosstalk among pixels. However, it is negligible because scattered rays inside highly absorptive BM are re-scattered due to the high scattering particle density, decreasing the power of scattered rays into the active areas.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1449-1454
• /
• 2003

For many industrial processes there are good static models used for process design and steady state operation. By using system identification techniques, it is possible to obtain black-box models with reasonable complexity that describe the system well in specific operating conditions [1]. But black-box models using inductive modeling(IM) is not suitable for model based control because they are only valid for specific operating conditions. Thus we need to use deductive modeling(DM) for a wide operating range. Furthermore, deductive modeling is several merits: First, the model is possible to be modularized. Second, we can increase and decrease the model complexity. Finally, we are able to use model for plant design. Power plant must be able to operate well at dramatic load change and consider safety and efficiency. This paper proposes a simplified nonlinear model of an industrial boiler, one of component parts of a power plant, by DM method and applies optimal control to the model.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.161-163
• /
• 2002

Service restoration following a complete or partial collapse starts with reenergizing a transmission line from black-start generators. Voltage problems can arise from Ferranti effect as unloaded transmission line is reenergized. This Paper presents system analyser to develop for verifying the primary restorative transmission system. The algorithm which has been used in the analyser is to handle load pick-up compensating Ferranti effect. and terminal voltage and reactive capability limitation of black-start generators about self-excitation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.136-137
• /
• 2005

To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EBA/carbon black composite showed by changing the content of carbon black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1 [Hz]. The modulus of specimens was increased according to an increment of carbon black content And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of carbon black content.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.2
• /
• pp.45-50
• /
• 2005

To improve mean-life and reliability of power cable, in this study, we have investigated electrical properties and stress-strain showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the nine of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the pre-heated oven of both 25±1 [℃] and 90±1 [℃]. And stress-strain of specimens was measured by TENSOMETER 2000. A speed of measurement was 200[mm/min], ranges of stress and strain were 400[Kgf/㎠] and 600[%]. In addition tests of stress-strain were progressed by aging specimens in air oven. From this experimental results, volume resistivity was high according to increasing the content of carbon black. And yield stress was increased, while strain was decreased according to increasing the content of carbon black. And stress-strain were decreased some after aging because of oxidation reaction of chemical defect. We could know EEA was excellent more than other specimens from above experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.301-307
• /
• 2004

To improve mean-life and reliability of power cable in this paper, we have investigated stress-strain and smoothness showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Stress-strain of specimens was measured by TENSOMETER 2000. A speed of measurement was 200[mm/min], ranges of stress and strain were $400(Kgf/cm^2)$ and 600[%]. In addition tests of stress-strain were progressed by aging specimens at air oven. Finally we wished to look for protrusion of specimens by using smoothness tester. According to increasing the content of carbon black from this experimental result, yield stress was increased, while strain was decreased. And stress-strain were decreased some after aging because of oxidation reaction of chemical defect. Lastly surface of specimens smoothed generally.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.89-96
• /
• 2005

To improve the mean-life and reliability of power cables, we have investigated the volume resistivity and thermal properties demonstrated by changing the content of carbon black, an additive of the semiconductive shield for underground power transmission. Nine specimens were made of sheet form for measurement. Volume resistivity of the specimens was measured by a volume resistivity meter after 10 minutes in a preheated oven at temperatures of both 25$\pm$1[$^{\circ}C$] and 90$\pm$ 1[$^{\circ}C$]. As well, specific heat (Cp) and thermal conductivity were measured by Nano Flash Diffusivity and DSC (Differential Scanning Calorimetry). The ranges of measurement temperature were from 0[$^{\circ}C$] to 200[$^{\circ}C$], and heating temperature was 4[$^{\circ}C$/min]. From these experimental results, volume resistivity was high according to an increase of the content of carbon black. Specific heat was decreased, while thermal conductivity was increased according to a rise in the content of carbon black. Furthermore, both specific heat and thermal conductivity were increased by heating temperature because the volume of materials was expanded according to a rise in temperature.

• The Journal of Fisheries Business Administration
• /
• v.37 no.1 s.70
• /
• pp.95-110
• /
• 2006

Japan's frozen shrimp future market is the only fisheries future commodity market in the world. This empirical study examines the lead and lag relationship between Japan frozen shrimp spot and future markets using the daily prices from August 1, 2002 to December 31, 2005. Frozen shrimp future contract is listed on Japan Kansai Commodities Exchange. Japan imports approximately 250,000 tons of frozen shrimp annually, of which just under 70,000 tons, nearly 30%, are black tiger shrimp. Approximately 90% of black tiger shrimp are caught in Indonesia, India, Thailand and Vietnam, and the two largest consumers of these shrimp are Japan and the U.S.A. Kansai Commodities Exchange adopts the India black tiger shrimp as standard future commodity. We use unit root test, Johansen cointegration test, Granger causality test, Vector autoregressive analysis and Impulse response analysis. However, considering the long - term relationships between the level variables of frozen shrimp spot and futures, we introduced Vector Error Correction Model. We find that the price change of frozen shrimp futures with next 1, 2, 3, 4, 5 month maturity have a strong predictive power to the change of frozen shrimp spot and the change of frozen shrimp spot also have a predictive power to the change of frozen shrimp with next 1, 2, 3 month maturity. But, the explanatory power of the frozen shrimp futures is relatively greater than that of frozen shrimp spot.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.191-196
• /
• 2010

Power system restoration following a massive or complete blackout starts with energizing the primary restorative transmission system. During this primary restoration process, unexpected overvoltage may happen due to nonlinear interaction between the unloaded transformer and the transmission system. In the case of the Myanmar electric power system, there are so many wide outage experiences, including complete blackout cases, caused by 230kV line faults and so on. Consequently, Myanmar's system operators have been well trained to deal with wide blackouts. Howver, system blackout restoration has been conducted by relying on the experience of only a few specialists. So, more scientific analysis is required to meet the requirements necessary to ensure fast and reliable system restoration. This paper presents analytical results on the primary restorative transmission system of Myanmar, focusing on the problems during the early restoration process. Methodologies are presented that handle load pick-up, terminal voltage and the reactive capability limitation of black-start generators to compensate the Ferranti effect. Static and dynamic simulation with the PSSolution and EMTDC programs respectively for the six cases are performed in order to select the primary restorative transmission lines.