• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.799-801
• /
• 1988

This paper was studied on the effects of Ca-La-Nb substitution and Zr/Ti ratio variation to Pb(Zr, Ti)$O_3$ system on structural, electrical, optical and sound level characteristics in order to develope the piezoelectric and electrooptic ceramic devices. Also the specimens were prepared by the two stage sintering technique. The molecular formular was X($CaO{\cdot}1/4La_{2}O_{3}{\cdot}1/4Nb_{2}O_{5}){\cdot}(1-X)Pb(Zr_{Y}Ti_{1-Y})O_{3}$(x=100X, y=100Y), and the variation of x was $6{\sim}12$, y was 60${\sim}$49 and second stage sintering time was 20${\sim}$40 hours. The experimental results obtained from this study are as follows : 1. The density was decreased, the grain size was increased according to increase of Ca-La-Nb substitution. 2. The crystal structure was rhombohedral in composition 6/60/40, and the crystal structure was tetragonal and cubic according to increase of Ca-La-Nb substitution. 3. The Ca substitution of PZT system enhanced the sintering property. The Pb site vacancy resulting from the substitution of La-Nb increased the dielectrical constant, the piezoelectric charge constant, the dielectric loss and decreased the coercive field. 4. The resistivity of PZT system which has the P type conduction mechanism increased according to substitution of La-Nb because of the substituent acting as donor. 5. The PZT ceramics varied from ferroelectric substance according to increase of Ca-La-Nb substituent. The coercive field and saturation remanent polarization decreased, and at last straight line according to increase of La-Nb substitution. 6. The amount of Ca-La-Nb substitution to improve the light transmittance of speciment was 10 mol%, the Zr/Ti ratio was 49/51, and the second stage sintering time was 40 hours. 7. According to Ca-La-Nb substitution, the specimens was to be transparent. The 7.5/51/49 specimen was suitable for transparent sound vibrator because it had 58% light transmittance (thick 0.2[mm], wave length 700[mm]) and 48% electromechanical coupling factor.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.548-553
• /
• 2004

본 논문에서는 높은 지향성을 갖는 1∼3단까지의 마이크로스트립 방향성 결합기 구조를 제시하였다. 마이크로스트립 구조의 우, 기모드의 위상차에 의한 지향성 특성이 저하되는 구조적인 문제점을 개선하고자 결합선로의 입출력단에 위상 보상용 커패시턴스를 구현해 주어 격리특성을 개선하였다. 용량성 보상은 결합선로의 보조선로에 형성해준 개방 스터브를 이용하여 구현되었다. 따라서 개방 스터브에 의한 삽입손실의 증가, 입사전력제어에 영향을 받지 않는다. 위상 보상용 커패시터는 평면형으로 구현되어 제작이 편리하고 재현성이 우수하며 다른 소자와 연계가 쉬워 집적화를 가능하게 한다. 제작된 1∼3단 방향성 결합기는 마이크로스트립 구조임에도 불구하고 각각 30 ㏈, 27 ㏈, 25 ㏈의 높은 지향성을 얻을 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.

• 한국광학회지
• /
• 제20권4호
• /
• pp.249-254
• /
• 2009

본 연구에서는 파라핀이 코팅된 Rb원자 증기 셀을 이용하여 $^{87}Rb$ $D_1$전이선의 Hanle스펙트럼과 비선형 광자기 효과 신호를 조사하였다. 파라핀 코팅 증기 셀의 효과에 의한 좁은 스펙트럼 폭을 가진 영역과 순수 증기 셀에서 얻을 수 있는 넓은 스펙트럼폭을 가진 이중구조의 Hanle 스펙트럼을 관측할 수 있었다. 스펙트럼에 나타난 이중구조에서 좁은 선폭 영역의 선폭은 1 kHz로 측정되었고, 스펙트럼 크기는 전체 스펙트럼에 대해서 10%로 측정되었다. 또한, Hanle 스펙트럼에 대응되는 이중 미분형태의 비선형 광자기 신호를 관측하였으며, 기울기가 급격하게 변하는 비선형 광자기 신호의 기울기는 레이저의 출력이 $200{\mu}W$일 때 대략 10 mV/${\mu}T$였다.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.174-180
• /
• 2012

In this study, the feasibility of spectral domain optical Doppler tomography for measuring blood flow characteristics in a micro-tube was demonstrated through several experiments. The use of an SD-ODT system in blood flow measurement can provide high resolution images (5 microns resolution). We prepared three capillary tubes to reveal the effect of different concentrations of hematocrit ratio (HR). One tube serves as the control. The two other tubes contained different concentrations of HR (5%, 25%). Three different capillary tube inlet flow velocities were tested in the present study. The Reynolds number (Re) which is based on the capillary tube inner diameter ranges from Re=6 to 48. We calculated a Doppler shift of the power spectrum of the temporal interference fringes with Kasai autocorrelation function to achieve the velocity profile of the flow. As a result, SD-ODT systems could not detect the cell depletion layer in the present study due to the limitation of spatial resolution. Nevertheless, these systems were proven to be capable of observing the RBCs of blood.

• Nuclear Engineering and Technology
• /
• 제27권1호
• /
• pp.53-66
• /
• 1995

현재 사용중인 Non-LOCA 해석용 인허가 코드들은 특정한 형태의 가압경수로에 맞게 짜여진 것들이어서 모든 형태의 가압 경수로에 적용할 수 있는 범용 코드의 개발이 필요한 실정이다. 이를 위하여 한국원자력연구소에서는 웨스팅하우스 및 CE형 발전소에 공히 적용할 수 있는 과도현상 해석 코드인 TASS 로드를 개발하고있다. 이 TASS 코드는 실시 간 보다 빠르게 핵증기계통에 대한 모의 계산을 수행하며 대화식의 입출력을 통하여 사용자가 원하는 과도현상을 정확히 모사할 수 있다. 본 논문에서는 웨스팅하우스형 발전소에 대하여 TASS 코드를 적용하여 Non-LOCA 인허가 해석을 하기 위한 검증을 위해, 교류 전원 상실사고와 부하상실사고에 대하여 발전소 실측자료와의 비교계산을 수행하였고 주급수관 파단사고, 펌프축 고착사고, 증기발생기 세관 파열사고 및 주증기관 파단사고들에 대하여 대형코드인 RELAP5 /MOD3 코드와의 비교계산을 수행하였다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1996년도 봄 학술발표회 초록집
• /
• pp.22-22
• /
• 1996

;The Kwinana Shoreline Fumigation Experiment(KSFE) took place in Fremantle, WA, Australia between 23 January and 8 February, 1995. All measurement systems performed to expectation. The CSIRO DAR(Division of Atmospheric Research) LIDAR measured plume sections from near the Kwinana Power Station(KPS) stacks to up to about 5 km downstream. It also measured boundary layer aerosols and the structure of the boundary layer on some occasions. Both stages A and C of KPS were used as tracers at different times. Radiosonde and double theodolite sounding systems measured temperature, humidity, air pressure and wind structure at the coast(Woodman Point) and at the inland(ALCOA residue dump) site at intervals of roughly two hours. These were supplemented by mid afternoon soundings(radiosonde and single theodolite) by Department of Environmental Protection(DEP) at Swanbourne. The Flinders aircraft measured wind, turbulence and temperature structure of the atmospheric boundary layer, concentrations of $C0_2,\;0_3,\;S0_2\;and\;NO_x$ in the smoke plumes and surface radiation over both land and sea. CSIRO DCET(Division of Coal and Energy Technology) vehicle successfully interceptde many smoke plumes and using a range of tracers will be able to identify the various sources much of the time. Routine data from the DEP and Kwinana Industrial Council(KIC) air quality monitoring networks were also automatically logged. Murdoch University measured surface heat flux at Hope Valldy monitoring station and also at Wattleup monitoring station for the last five days. The heart of the LIDAR system is a Neodymium-doped Yttrium-aluminumgarnet(Nd:Y AG) laser operating at a fundamental wavelength of 1064 nm, with harmonics fo 532 nm and 355 nm. A small fraction of the laser beam is scattered back to the LIDAR, collected by a telescope and detedted by a photomultiplier tube. The intensity of the signal as a function of time is a measure of the particle concentration as a function of distance along the line of the laser shot. The results of nine days special field observations are summarized in detail.etail.

• 한국안광학회지
• /
• 제5권2호
• /
• pp.193-199
• /
• 2000

수소화된 비정질 탄소 박막은 PECVD 방법으로 제작하였으며 박막의 증착률은 아세틸렌 가스의 함량에 의존하였다. 이것은 메탄 기체를 사용하였을 때와 비교해 조금 높았다. 박막의 광학적 밴드 갭은 1.4~1.8eV였으며 아세틸렌 함량에 밀접한 연관성을 보여주었다. Raman과 FTIR 분광에 의하여 $sp^3/sp^2$의 정성적인 분율을 결정할 수 있었으며 이러한 결과로부터 아세틸렌 함량 13.8%의 박막이 최적의 조건이었다.

• 융합신호처리학회논문지
• /
• 제5권4호
• /
• pp.308-316
• /
• 2004

실내 환경에서 자율이동 로봇은 방향의 전환과 움직임에 있어서 많은 제약이 따른다. 본 연구는 이런 제약을 해결하기 위하여 수평, 대각이동이 가능한 Omni-Directional Wheel을 로봇 구동부에 적용하였다. 하지만 Slip에 의해서 동력을 얻는 Omni Directional Wheel 구동방식은 Slip에 의한 오차가 발생하는 문제점이 있었다. 이 문제점을 해결하기 위해 개발된 Slip 보정 알고리즘은 하나의 타일을 지날 때마다 외곽선을 추출하고, 추출된 외곽선과 로봇의 절대방위가 이루는 각도를 비교하여 오차가 발생할 경우 로봇의 절대방위를 수정하게 한다. 또한 로봇은 보안기능과 서비스 기능을 수행한다. 보안기능은 차 영상을 이용하여 움직임을 감지한다. 서비스 기능으로는 로봇에 입력되는 영상을 일반사용자에게 다중전송 하고, 간단한 이동명령이 있다. 본 연구에서 제안한 로봇 시스템은 실제 사무실에서 사용가능한 하나의 모델이 될 수 있다.

• 대한안전경영과학회지
• /
• 제9권1호
• /
• pp.197-211
• /
• 2007

The power of semiconductor, Korea is continuously constructing semiconductor production line for keeping a front-runner status. however, studies and data about potential risks in semiconductor factory are still short. If fire does not initially suppressed, the fire causes a great damage. To decrease fire risk factors, in addition to fire fighting safety equipment, more important thing is how to design and construct fire protection system. The current fire protection codes about semiconductor factory come under functional law, and this law is short of consideration about particularity of factory. The existing prescriptive fire codes depending on experience compose without evident engineering verifications, thus equipments which is created by the current prescriptive fire code may bring about a variety of problems. For example, the design under the current regulation can not cope with the excessive investments, low efficiencies, and the diversifying construction designs and be applied to the quick changes of new technologies. Ergo, an optimal design for fire protection is to equip fire protection arrangements with condition and environment of production field. Manufacturing factory of semiconductors is a windowless airtight space. And for cleanliness, there exists strong flow of cooperation. Therefore, there is a need for fire safety design that meets the characteristic of a clean room. Accordingly, we are to derive smoke flow according to cooperation process within a clean room and construction plan of an optimal sensor system. In this study, in order to confirm the performance of proposed smoke-exhaust equipment and suggest efficient smoke exhaust device when there is a fire of 1MW of methane in the clean room of company H, we have implemented fire simulation using fluid dynamics computation.