• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1054-1057
• /
• 1993

A direct method of fuzzy inference and a fuzzy algorithm with learning function are applied to the steam generator level control of nuclear power plant. The fuzzy controller by use of direct inference can control the steam generator in the entire range of power level. There is a little long response time of fuzzy direct inference controller at low power level. The rule base of fuzzy controller with learning function is divided into two parts. One part of the rule base is provided to level control of steam generator at low power level (0%∼30% of full power). Response time of steam generator level control at low power level with this rule base is shown generator level control at low power level with this rule base is shown to be shorter than that of fuzzy controller with direct inference.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.358-364
• /
• 2018

In this study, the theoretical methodology is presented for estimating cost function based on operating modes for Combined Cycle Power Plant. The proposed method has estimated cost functions using the relationship between the gas turbine heat input and the output ratio of the steam turbine. In order to verify the proposed method, a regression analysis was performed using the single cost function estimated by the existing performance test method and the cost function for each operating mode estimated by the proposed method. The results of case studies using the 2016 generator input and output data are presented to show the effectiveness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.772-774
• /
• 1998

MMIS System of KNGR is composed of systems by using of digital equipment in general, and also interface function among systems is completed by a network. According to this, KNGR PCS also got rid of many kinds of interface cards which have been used for hardwired interface to outside system, and most of function in these cards is to be programmed by PLC. This paper defines the function and method which is to be programmed to PLC. And this paper presents new function which is to be added for operator's interface by using network. It is expected that PCS logic cabinet will be more simplified, satisfy KNGR design concept, and operation convenience will be increased.

• 대한통합의학회지
• /
• 제9권3호
• /
• pp.203-211
• /
• 2021

Purpose : It was to compare changes in respiratory function (pulmonary function, inspiratory function) after four weeks of inspiratory muscle strengthening training (diaphragmatic breathing with upper arm exercise, Power-Breathe breathing) for 36 healthy people. Methods : Subjects were randomly assigned to diaphragmatic breathing with upper arm exercise (Group I) and Power-breathe breathing (Group II) was conducted by the protocol for four weeks five times per week. As the main measurement method for comparison between groups For pulmonary function, Forced Vital Capacity (FVC) and Forced Expiratory Volume at One second (FEV1) were used, and for inspiratory function, Maximum Inspiratory Capacity (MIC), Maximum Inspiratory Pressure (MIP), and Maximum Inspiratory Flow Rate (MIFR) were used. Results : In changes in pulmonary function between groups, FVC and FEV₁ showed no significant difference, and in inspiratory function changes, MIC showed no significant difference, but in MIP and MIFR, Group B significantly improved over Group A. Conclusion : The progressive resistance training using the Power-breath device applied to the inspiratory muscle did not show a significant difference in the increase in the amount of air in the lungs and chest cage compared to the diaphragmatic breathing training accompanied by the upper arm exercise. However, by increasing the air inflow rate and pressure, it showed a more excellent effect on improving respiratory function.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.567-574
• /
• 2009

A linear transfer function for the output current control of frequency-controlled resonant inverters is proposed in this paper. The circuit of resonant inverters can be transformed into two coupled circuits through the complex phasor transform. The circuits consist of cross-coupled power sources and passive elements. The circuits are used to induce the state space equation, which is transformed into the $4^{th}$ order cross-coupled transfer function. The $4^{th}$ order cross-coupled transfer function is modeled into a $2^{nd}$ order linear transfer function based on a behavior analysis of the pole and zero locations that facilitate a simple and intuitive linear transfer function. The feasibility and validity of the proposed linear transfer function were verified by simulation and experiment.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.693-702
• /
• 1994

This paper deals with direct voltage stability analysis using a power system energy function. The structure preserved energy function is proposed as an energy function for voltage stability analysis. With the use of the proposed energy function voltage collapse conditions are derived, which yields the exactly same results with the Jacobian matrix approach. The voltage collapse phenomenon is analyzed by several methods, which shows that all of the methods produce the same voltage condition. This study also investigates the voltage collapse dynamics by using the proposed energy function. As a result, it has been found that the voltage collapse can be classified into two categories: static and dynamic instablilties which have quite different behaviors. In addition a new method is presented to calculate the power capacity limit of transmission lines with respect to voltage stability. The proposed method is tested for a 2-bus sample system, which shows the characteristics of voltage collapse phenomenon via the energy function.

• 한국건설관리학회논문집
• /
• 제19권6호
• /
• pp.135-143
• /
• 2018

건설 프로젝트를 성공하기 위해서는 핵심 이해관계자인 발주자와 시공사의 협력적 관계가 무엇보다 중요하다. 거래 상대방의 행동에 영향을 미치거나 통제 할 수 있는 권력은 건설 프로젝트에서 이해관계자간에 협력적인 행동을 유발 할 수 있는 요소로 간주될 수 있다. 또한, 거래 비용 이론에 따르면 계약은 효과적으로 거래 상대방의 행동에 영향을 미친다. 권력에 추가하여 계약 또한 시공자의 협력적 행동을 설명 할 수 있는 요소라고 할 수 있다. 건설 프로젝트에서 시공사의 협력적 행동을 유발하기 위해 발주자의 권력이 유효한 영향력을 미치는지는 매우 흥미로운 주제이다. 한편, 계약의 기능에 대한 심층적인 이해는 성공적인 건설 프로젝트 관리에 있어 필수적인 부분이다. 본 연구에서는 국내 건설 프로젝트에서 발주자의 권력 및 계약의 기능과 시공자의 행동 사이의 매커니즘을 탐색 해 보고자 한다.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.922-930
• /
• 2011

In this paper, two radial basis function neural networks (RBFNNs) are used to dynamically identify harmonics content in converter waveforms based on the p-q (real power-imaginary power) theory. The converter waveforms are analyzed and the types of harmonic content are identified over a wide operating range. Constant power and sinusoidal current compensation strategies are investigated in this paper. The RBFNN filtering training algorithm is based on a systematic and computationally efficient training method called the hybrid learning method. In this new methodology, the RBFNN is combined with the p-q theory to extract the harmonics content in converter waveforms. The small size and the robustness of the resulting network models reflect the effectiveness of the algorithm. The analysis is verified using MATLAB simulations.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.233-239
• /
• 2013

This paper proposes an accurate approach for predicting transferred power from a noise source to integrated circuits based on the characteristics of the power transfer network. A power delivery trace on a package and a printed circuit board are designed to transmit power from an external source to integrated circuits. The power is demonstrated between an injection terminal on the edge of the printed circuit board and integrated circuits, and the power transfer function of the power distribution network is derived. A two-tier calibration is applied to the test, and scattering parameters of the network are measured for the calculation of the power transfer function. After testing to obtain the indispensable parameters, the real received and tolerable power of the integrated circuits can be easily achieved. Our proposed estimation method is an enhancement of the existing the International Electrotechnical Commission standard for precise prediction of the electromagnetic immunity of integrated circuits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2108-2110
• /
• 2001

Used analog control systems have been converted into digital control systems due to performance degradation and difficulty of maintenance. There are few domestic DCS (Distribued Control System)s that have been applied to power plant. To apply a domestic DCS to power plant, the reliability, redundacny, and fault tolerance of DCS is important. Besides those items, the control action of control function block is also important. In this paper, we describe the requirements that PID control function block has to have, and implement a PID control function block that satisfies those requirements. Finally, real control result using an implemented PID function block in thermal power plant shows the validity of an implemented PID control function block.