• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.422-423
• /
• 2008

배전설계기준에 따르면 관로를 포설할 때 9공 초과시 도로 양측으로 시공하거나 전력구를 시공하게 되어 있으나 현장의 각종 지하 매설물 및 공사 예산 등 여러 가지 문제들로 인해 다회로 공법에 대한 검토가 필요한 실정이다. 본 논문에서는 A지점의 사례를 통해 케이블 허용전류 계산 프로그램(CYMCAP)을 이용하여 관로 이격거리에 따른 허용전류 값을 비교 검토하였다. 향후 전력수요 증가에 따른 대용량 배전선로의 안정적인 전력 확보를 위해서 다회로 공법 개발과 동시에 국내 지역적 환경 특성과 케이블 특성 등을 고려한 파라메타를 정립하여 정확한 허용용량을 산정하는 것이 중요하다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.599-600
• /
• 2015

This paper presents study of recloser operation in distribution system with Energy Storage System(ESS). However, interconnecting of ESS influence power flow and increasing/decreasing of fault current. Recloser provides stability of system and improves power transmitting ability by reclosing in fault current. The single-line to ground fault current simulated by Electromagnetic Transients Program (EMTP). The simulation is implemented for the three different situations about by using EMTP MODELS.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.161-165
• /
• 2006

In this paper, we developed HPF (high pass filter) consists of lumped LC components to decrease the noises that are detected in PD (partial discharge) measuring test, and adapted it to field test. We tested it under laboratory circumstances like the fields, and measured the phase change properties of detected signal in UHF sensor with Lemke Probe and oscilloscope (TDS-3054, Tektronix). As a result, we obtained available data showing the decrease of noises in the experiments with the developed HPF from the joint box of 22.9kV distribution line. The result can be adapted to prevent the degeneration of the XLPE power cable, and to observe and diagnosis the underground power transmission cable at the ultra-high voltage.

• Solar Energy
• /
• v.19 no.4
• /
• pp.63-69
• /
• 1999

The conventional grid connected PV(Photovoltaic) system has a unstable output pattern due to its dependence on the weather condition, although solar-cell array averagely has a regular output characteristics to have a peak output nearly at noon. Therefore assuming the high density grid connection in the future, this unstable output pattern can be one of the main reasons to generate power disturbance such as voltage variation, frequency variation and harmonic voltage generation in low voltage distribution line. However general grid connected solar-cell system do not have functions to cope with these disturbances. Therefore this study proposed a advanced type grid connected PV system with functions to suppress output power fluctuation due to solar-cell array output variation and showed the levelling effect of fluctuation due to instantaneous array output variation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.1
• /
• pp.16-21
• /
• 1999

The analysis of distribution line faults is essential to the proper protections of the power system. A high impedance fault test, which was carried in Korean electric power systems, it was found that a arcing phenomenon occurred during the high level portion of conductor voltage in each cycle. In this paper, we propose a new method for detection of high impedance faults, which uses the arcing fault current difference during high voltage and low voltage portion of conductor voltage waveform. To extract this difference, we diveded one cycle fault current into equal spanned four data windows according to the magnitude of voltage waveform and applied fast fourier transform(FFT) to each data window. The frequency spectrum of current wavefrom in each portion are used as the inputs of neural network and is trained to detect high impedance faults. The proposed method shows improved accuracy when applied to staged fault data and fault-like load.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.31-32
• /
• 2007

In this paper, a fault section detection method is proposed for ungrounded system in the case of a single line-to-ground fault. A conventional method is used for faulted feeder selection according to the angular relationship between zero-sequence currents of the feeders and zero-sequence voltage of the system. Fault section detection is based on the comparison of phase angle of zero-sequence current. Proposed method has been testified in a demo system by Matlab/Simulink simulations. Based on Distribution Automation System(DAS), Feeder Remote Terminal Unit(FRTU) is used to collect those necessary data, at present a demo system is under developing using Manufacturing Message Specification (MMS) in IEC61850 standard.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.35-37
• /
• 2019

본 논문은 배전선로 안정화 구현을 위한 무효전력 보상기의 새로운 무효전력 제어기법을 제안하였으며, 시뮬레이션 및 실험을 통해 무효전력제어 알고리즘의 성능을 검증하였다. 무효전력 제어는 동기좌표계 d축 전류성분 제어를 통해 수행되고, DC 링크 전압을 일정하게 유지하기 위한 전압 제어와 이에 필요한 유효전력은 q축 전류성분 제어를 통해 구현된다. 제안된 무효전력 제어기법에 포함된 DC 리플 보상방식은 추출된 DC 전압의 오프셋 성분을 제거하는 HPF(high pass filter)부와 HPF 위상 특성으로 인해 발생한 위상변화 특성을 보상하기 위한 지연함수부로 구성되며, 리플성분이 보상된 전압을 전압제어기 피드백 성분으로 적용하였다. 시뮬레이션 및 실험을 통해 DC 전압 리플 보상방식이 적용된 무효전력 제어 기법이 적용된 경우 전류 THD가 크게 향상된 결과로부터 제안된 알고리즘의 성능을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.7
• /
• pp.261-271
• /
• 1986

This paper describes a method for the state estimation considering current measurement component and detection of the bad data. The state values are estimated by weighted least square method in which measurement vector included bus injection current and line current. The bad data are detected using standardized variable of normal distribution and identified using sensitivity coefficients. When the bad data were occured by the bad measurement values. The results of the application to the model power system reveal the effectiveness of the presented algorithms.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.72_73
• /
• 2009

The industrial power system has the radial plant distribution system and domestic generators to supply the essential loads. When the system is isolated from the utility tie line, the system frequency drops resulting in the trip of generators. The load shedding scheme shall be properly designed to secure the essential load. In this paper two kinds of load shedding schemes, those are, the Fast Act Load Shedding(FALS) and Under Frequency Load Shedding(UFLS) are simulated and compared taking an example of petrochemical gas separation plant.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.553-555
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. In this paper, the design trend and method polymer insulator are investigated and Aging test method is analysed to know life time of insulator.