• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.148-150
• /
• 2002

Recently the demand for electrical power is significantly increased due to the life improvement of customers. Correspond to the result, the transmission capacity is larger, also the fault current is significantly larger. Within the methods of limiting this fault current, the methods of using the fault current limiter is on the rise. If the Superconducting Fault Current Limiter(SFCL) is applied, then the power delivery loss doesn't exist between the plural power systems, also the fault current can be reduce. But for applying the real system, it needs to investigate the effect of SFCL before appling to real power systems. Consequently, the fault of transmission with SFCL was simulated using EMTP. It was investigated to the effect of SFCL at the 345[kV] transmission fault according to compare with the case of appling SFCL and removing SFCL.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4385-4399
• /
• 2021

The Internet of Things (IoT) eHealth systems composed by Wireless Body Area Network (WBAN) has emerged recently. Sensor nodes are placed around or in the human body to collect physiological data. WBAN has many different applications, for instance health monitoring. Since the limitation of the size of the battery, besides speed, reliability, and accuracy; design of WBAN protocols should consider the energy efficiency and time delay. To solve these problems, this paper adopt the end-edge-cloud orchestrated network architecture and propose a transmission based on reinforcement algorithm. The priority of sensing data is classified according to certain application. System utility function is modeled according to the channel factors, the energy utility, and successful transmission conditions. The optimization problem is mapped to Q-learning model. Following this online power control protocol, the energy level of both the senor to coordinator, and coordinator to edge server can be modified according to the current channel condition. The network performance is evaluated by simulation. The results show that the proposed power control protocol has higher system energy efficiency, delivery ratio, and throughput.

• 한국정보과학회논문지:정보통신
• /
• 제33권2호
• /
• pp.165-174
• /
• 2006

매우 제한된 연산능력과 메모리 그리고 소용량 배터리를 가진 센서 노드로 구성된 센서 네트워크에서 플러딩이나 기존에 제안된 애드혹 라우팅 프로토콜을 적용하여 데이타를 전달하는 것은 현실적인 방안이 되지 못한다. 본 논문에서 우리는 ELF(Energy-efficient Localized Flooding)라고 하는 에너지 효율적인 데이타 전달 프로토콜을 제안하고자 한다. ELF 프로토콜은 소스 센서 노드와 이동성을 갖는 싱크 노드 간의 데이타 전달에 있어서 tracking zone이전 까지는 유니캐스트를 통해서 데이타 메시지가 포워딩되며, tracking tone내에서는 지역적인 플러딩을 통해서 데이타가 전달되도록 하여 유니캐스트와 플러딩의 장점을 적절하게 결합하고 있다. 시뮬레이션을 결과에 따르면, ELF는 매우 높은 data delivery ratio를 유지하면서도 average energy consumption 및 average delay는 낮은 특성을 보임으로써 센서 네트워크의 데이타 전달 방법으로써 매우 효과적임을 확인할 수 있다.

• 대한간호학회지
• /
• 제29권3호
• /
• pp.700-710
• /
• 1999

Promoting women's health lifestyles are important due to their connection to family health. The purpose of this study was to analyse women's health lifestyles(HPL) and their effects on women's life-cycle, so in order to develop a program in a women's health care center. The subjects included were 1080 women over 18 years old living in Wonju city, and were selected by stratified and purposive sampling. The data were collected through a questionnaire and interview. The Cronbach $\alpha$, %, mean, ANOVA, Pearson's correlation, and regression in SPSS PC Win. package was used to analyze the data. The sample was sepernted into three groups premarital group 20.2%(premarital women between 18 and 40 years old), delivery and children rearing group 49.9%(marital women between 18 and 40 years old), over middle agedelderly group 29.9%(women over 41 years old). Significant difference were found in the HPL according to group. Also, relating variables, such as self-efficacy, family functions, health locus of control and gender role perception that were considered relating variables to HPL significantly differed among the three groups. HPL significantly correlated with self-efficacy, family functions, HLOC and gender role perception in all participants and at all groups. The regression analysis of HPL was interpreted 40.6% with relating variables, self-efficacy, health attention, family functions, and internal locus of control, health perception, power other locus of control and chance locus of control in all participant. Self-efficacy, family functions, health attention were considered important variables in premarital group, self-efficacy, family functions, internal locus of control, health attention, health perception and power of control were important in delivery-rearing group. Self-efficacy, health attention, internal locus of control, family functions and health perception were important in middle aged-elderly group. As a result, we found the differences HPL scores and relating variables according to life-cycle groups. Therefore, we should prepare health promoting education programs for women according to women's life cycles. Also we suggest that women's health care centers based on communities was needed for proper management of women's health.

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.744-753
• /
• 2017

The sediment delivery ratio (SDR) is widely used to estimate sediment loads by multiplying soil loss through the Revised Universal Equation (RUSLE). In this study, the SDR equation was developed for the Lake Imha watershed using soil loss calculated by RUSLE and sediment loads by the calibrated Hydrological Simulation. Program Fortran (HSPF). The ratio of watershed relief and channel length ($R_f/L_{ch}$), the ratio of watershed relief and watershed length ($R_f/L_b$), curve number (CN), area (A), and channel slope ($SLP_{ch}$) demonstrated strong correlations with SDR. SDR equations were developed by a combination of subwatershed parameters by referring to the correlation analysis. The area based power functional SDR developed in this study showed significant errors at the point right after entering major tributaries, because SDR was unrealistically reduced when the watershed area increased significantly. The $SLP_{ch}$-based power functional SDR also showed extraordinary values when the channel slope was gradual. The SDR equation that showed the highest value of the coefficient of determination also presented unrealistic changes in the sediment loads within a relatively short river distance. The SDR equation $SDR=0.0003A^{0.198}R_f/L{_w}^{1.167}$ was recommended for application to the Lake Imha watershed. Using this equation, sediment loads at the outlet of the Lake Imha watershed were calculated, and the HSPF parameters related to sediment in the uncalibrated subwatersheds were determined by referring to the sediment loads calculated with the SDR equation.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.33-40
• /
• 2017

This paper addresses the assessment methods used to evaluate the magnetic exposure of a human to ELF EMF (Extremely Low Frequency Electromagnetic Field) which is caused by the process of power delivery from 60 Hz commercial power. These days the main concern is primarily focused on the magnetic field. For the exposure assessment, both numerical studies and laboratory experiments were studied and the results of the two compared for methodological suitability. The numerical analyses employ the Impedance Method (IM), Boundary Element Method (BEM), and Finite Element Method (FEM) and the laboratory experiments used various human phantom models made with conductivities congruent to human organs and then exposed to uniform/non-uniform magnetic fields to produce eddy currents. Under these conditions a number of examples have been evaluated and the reliability assessed to present the pros and cons of each methodology.

• ETRI Journal
• /
• 제37권1호
• /
• pp.118-127
• /
• 2015

The power consumption of 3D many-core processors can be reduced, and the power delivery of such processors can be improved by introducing voltage island (VI) design using on-chip voltage regulators. With the dramatic growth in the number of cores that are integrated in a processor, however, it is infeasible to adopt per-core VI design. We propose a 3D many-core processor architecture that consists of multiple voltage clusters, where each has a set of cores that share an on-chip voltage regulator. Based on the architecture, the steady state temperature is analyzed so that the thermal characteristic of each voltage cluster is known. In the voltage scaling and task scheduling stages, the thermal characteristics and communication between cores is considered. The consideration of the thermal characteristics enables the proposed VI formation to reduce the total energy consumption, peak temperature, and temperature gradients in 3D many-core processors.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.215-222
• /
• 1996

This paper reports on theoretical study of the compression process within balanced type vane pump for Electro-Hydraulic Power Steering(EHPS). Equations fo camring profiles are derived, then displacements, velocities, accelerations, and jerks are calculated. Vane side leakages, vane slit leakages, and rotor side leakages are considered and calculated. Numerical integration of flow equation is performed using 4th Runge-Kutta method. As a result of analysis, it is found that chamber pressure depends on rotational speeds, bulk modulus of fluid, notches, camring profiles, and positions of delivery port. Especially, the variation of notch area is the most important factor that prevents pressure from rapid rising.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.430-433
• /
• 2005

Laser bonding between similar and dissimilar thermoplastics has been investigated by making use of laser transmission weld technique. Spot welding of two layers of plastic materials has been demonstrated by using of a high-quality diode-laser with 808nm wavelength. Weld areas increases according to power density, exposure time. The results of peel out test show that peel strengths increase with the area of molten plastics. Layers, which have the same chemical properties, have good bonding qualities. A bonding method which dye film is coated on the interface is used for laser bonding between plastics with high transmission for laser wavelength. Laser transmission bonding is worthy of attention because it is not in contact, requires a few tooling devices, allows a flexible energy delivery and produces nearly invisible welds

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1601_1602
• /
• 2009

본 논문은 SSN(Simultaneous Switching Noise) 이 유전체를 통해 다른 시스템에 유기되는 것을 막기 위한 방법인 EBG(Electromagnetic Band-Gap)에 관한 연구이다. 이에 대한 EBG 구조를 설계하기 위해 PDN(Power Delivery Network)에 주기적인 패턴을 삽입한다. 패키지에 EBG 구조를 적용하기 위해 인쇄 회로기판 범위에서 연구되었던 구조를 변형 및 개조하여 EBG 구조가 내포하고 있는 필터의 차단 주파수의 범위를 넓히며 차단 시작 주파수를 1GHz 아래로 낮추는 소형화 방법을 모색한다. 이 연구에서 실시할 EBG 구조에 대한 간단한 고찰과 인쇄 회로 기판에 적합한 AI-EBG(Alternating impedance Electromagnetic Band-Gap) 구조를 이용한 EBG 의 소형화에 대해 언급하고, 소형화를 위한 3-D EBG 의 설계구조에 대해 설명한다. 그리고 저주파에서 차단특성을 높이기 위한 방법으로 3-D EBG를 사용하고 AI-EBG와 비교하여 차단특성의 변화를 Full-wave 시뮬레이션과 측정으로서 비교한다.