• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.317-320
• /
• 2003

Nowadays, the study on the ceramic components and modules used in telecommunication system is being performed. Coupler is a microwave passive component used for power coupling or dividing and directional coupler is designed to be possible optional dividing percentage. In our research, We developed 14dB and 19dB directional couplers of DCS band. The good characteristics, the target insertion loss and high isolation, of couplers is obtained by LTCC processing using a ceramic material.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.6
• /
• pp.72-77
• /
• 1980

We analyze several problems concerning the operation of the optical feedback prebias control scheme in the loser diode optical transmitter and present a LD simulation circuit as a way of adjusting the component's optimum value without using the Laser - triode. 1.5% light power decrease was observed between the temperature range of $0^{\circ}C$ and 36$^{\circ}C$ in which the total light power of LD was used for feedback loop and fairly good operation was demonstrated when a star coupler was employed as a beamsplitter by which approximately 1% portion of the light power was feedbacked.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.809-811
• /
• 1993

The load impedance of power lines generally varies with time, areas, and season. Also, the harmonic noises by the power electrical equipments are scattered through the power lines. The received signal level varies with the environment and is not able to detect the PLC(Power Line Carrier) signal. For this reason, it is requried for the signal transmitter to hold the received signal level uniform independently with the variation of the load impedence. In this paper, the power lines are modeled simply and a method keeping the received signal level uniform is suggested through the analysis of the signal transmission characteritics of the PLC coupler using tank circuit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.55-59
• /
• 2008

In this paper, the linearity of Doherty amplifier has been improved by applying a compact slow-wave microstrip branch-line coupler on the output of Doherty amplifier. The proposed branch coupler has four microstrip high-low impedance resonant cells periodically placed inside the branch-line coupler to result in high slow-wave effect. The new coupler not only effectively reduces the occupied area to 30% of the conventional branch-line coupler at 1.8GHz, but also has high second harmonic suppression performance. We obtained the 3rd-order intermodulation distortion ($IMD_3$) of -31.16 dBc for CDMA applications with that of maintaining the constant power added efficiency (PAE). The IMD3 performance is improved as much as -7 dBc compared with a Doherty amplifier.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.175-180
• /
• 2019

The optical characteristics and power transfers between guiding channels of blazed grating-assisted directional coupler (B-GADC) are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. To evaluate the coupling efficiency of B-GADC, the dispersion curves as a function of the grating period and wavelength are analyzed numerically for quasi-TE and quasi-TM modes. Furthermore, symmetric, sawtooth and asymmetric grating profiles are considered to know the effect of blazing characteristics on power transfer of GADC. The numerical results show that the grating period for minimum-gap condition to obtain maximum power transfer decreases gradually as the blazed structure changes from symmetric to asymmetric profile. On the other hand, the coupling length increases reversely.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.445-450
• /
• 2017

In this paper, the directional coupler with half-power division is designed and fabricated by using the vertical coupling structure based on the CPW transmission-line. Even-mode and odd-mode of the vertical coupling structure can be analyzed by the conventional CPW-line and the CBCPW-line, respectively, with half thickness of the substrate. The directional coupler is designed by using the tefron substrate with the dielectric constant of 2.55 and the thickness of 0.76mm. Manufactured directional coupler has the center frequency of 2.45 GHz and the bandwidth of 66.1%. Also, the return loss and isolation are 19.52dB and 19.47dB, respectively, at the center frequency.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.5
• /
• pp.204-212
• /
• 2002

In order to improve the reliability of high voltage rotating machines, it is necessary to understand the breakdown mechanism of stator windings. Especially partial discharge(PD) inception and growth are important in stator winding insulation. Recently, many research on the diagnosis of stator winding insulation for large rotating machines have been developed since the 1970s. Capacitive couplers have been the most widely used sensor for on-line partial discharge detection in rotating machines. This paper deals with the electrical on-line monitor characteristics of ceramic coupler(CC) which has been developed to continuously measure the PD activity in operating high voltage motor stator windings on site. We investigated the electrical characteristics(PD quantity, breakdown voltage and frequency response) to develop CC. This paper presents frequency characteristics and laboratory test result to compare conventional 80([F] epoxy-mica coupler(EMC) and 105[pF] CC for PD measurement with 6.6㎸ model stator windings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.921-928
• /
• 2003

This paper propose a new design of directional couplers with the high directivity. The directional coupler is used to check and verify the power, frequency and antenna reflection of a signal at transmission station for the mobile communications. The performance index of the directional coupler is to which the coupling is strong to reduce the effect on the transmitted power and the directivity is high to suppress the interference of the reflected signals and reduce the nor in the communication. Then, the architectures to gain the high directivity and the studies to get the strong coupling have been proposed However, the conventional architectures lot the high directivity and strong coupling have the directivity by about 20㏈ and the difficulty to achieve the higher directivity than 40㏈ suitable for IMT-2000 [1]. This paper proposes an architecture of the directional coupler which is based on the grounding composed of the strip lines and the comparison results with the conventional directional couplers. The comparison results show that the proposed directional coupler has the directivity more than 40 ㏈ and is adequate for the 2.05GHz IMT-2000

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.52-56
• /
• 2014

In this paper, a high-efficiency power amplifier is implemented using a gate and drain bias control circuit for WPT (Wireless Power Transmission). This control circuit has been employed to improve the PAE (Power Added Efficiency). The gate and drain bias control circuits consists of a directional coupler, power detector, and operation amplifier. A high gain two-stage amplifier using a drive amplifier is used for the low input stage of the power amplifier. The proposed power amplifier that uses a gate and drain bias control circuit can have high efficiency at a low and high power level. The PAE has been improved up to 80.5%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.165-170
• /
• 2016

Nano-scale power splitter based on curved plasmonic waveguides are designed by utilizing the multimode interference (MMI) coupler. To analyze easily the adaptive properties of plasmonic curverd multimode interference coupler(PC-MMIC), the curved form transforms equivalently into a planar form by using conformal transformation method. Also, effective dielectric method and longitudinal modal transmission-line theory are used for simulating the light propagation and optimizing the structural parameters at 3-D guiding geometry. The designed $2{\times}2$ PC-MMIC does not work well for quasi-TM mode case due to the bending structure, and it does not exist 3dB coupling property, in which the power splitting ratio is 50%:50%, for quasi-TE mode case. Further, the coupling efficiency is better when the signal is incident at channel with large curvature radius than small curvature radius.