• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.134-137
• /
• 2008

현재 에너지 시장은 신흥 개발 도상국의 화석 에너지 사용량 급등 등의 요인으로 인해 고유가 시대가 지속될 것으로 전망되고 있다. 또한 화석 에너지 사용으로 지구 온난화가 지속되고 있으며, 이에 온실가스 배출을 규제하기 위한 유엔기후변화협약 및 환경변화 문제 해결을 위한 사회적인 합의가 이뤄지고 있다. 그러므로 다양한 신재생 에너지원의 연구 개발 및 사용이 가속화되고 있으며, 그중 기술적으로 가장 근접한 것이 태양광 발전이다. 본 논문은 당사에서 개발하는 50kW 태양광 PCS의 운전 상태를 감시하고, 필요 요소를 제어하며, 취득된 데이터를 eRTU 등의 상위 시스템에 개방된 프로토콜로 통신을 통해 올려주는 태양광 PCS HMI Unit에 대해 논하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.132-135
• /
• 1996

This study is to develop an ammonia based chemical heat pump(STELF) for a freezing and refrigeration system coupled to gas, fuel and/or waste from industrial processes as heat sources. Recently it has been continually taking a growing interest in chemical heat pumps without electric power and having higher COP's than those of existing compression type refrigeration systems using freon. By introducing STELF technology, efficient heat recovery utilizing enormous amount of waste heat in energy consuming large scale industries or building for their own refrigeration purposes is possible. Moreover, air-conditioning systems coupled to city gas for small scale industries or building can be realized. Therefore, STELF technology can contribute much for overall energy savings and efficient energy management.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.992-993
• /
• 2006

본 논문에서는 계통연계형 인버터에서 요구되는 전력품질 개선 기능, 부하수요관리 기능, 무정전전원공급 기능 등을 전류제어형 전압원 인버터 시스템에서 통합적으로 수행할 수 있는 UPS를 고려한 계통연계형 전류제어 인버터를 제안한다. 제안된 시스템은 평상시에는 무효전력 보상, 고조파 저감, 부하수요관리 등의 PCS(Power Conditioning System) 기능을 수행하고 계통 고장시에는 배터리에 저장된 에너지를 이용하여 부하에 즉시 정전압을 공급하는 UPS 기능을 수행한다. 본 연구에서는 제안된 시스템의 동작원리 및 제어 알고리즘을 이론적으로 해석하고 시뮬레이션을 통하여 유용성을 확인한다.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.193-198
• /
• 2005

The present experiments have been performed for obtaining the melting heat transfer characteristics of micro-encapsulated solid-liquid phase change material and water mixed slurry flow in a circular tube heated with constant wall heat flux. The phase change material having a low melting point was selected for a domestic cooling system in the present study. The governing parameters were found to be latent heat material concentration, heat flux, and the slurry velocity. The experimental results revealed that the increase of tube wall temperature of latent microcapsule slurry was lower than that of water caused by the heat absorption of fusion.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.199-204
• /
• 2005

The decrease of summer peak electric load of our country is very important. The government is arranging a lot of support policies and statutes. etc. to decrease of peak electric load. And ice storage system is known as one of the alternatives. The purpose of this study is to collect basic data for operating characteristics to plan the most suitable operation of capsule-type ice storage system. The storaging tank is designed to take charge 40% of total cooling load in building, In operation condition the storage tank took charge 50%. Coefficient Of Performance of daily screw refrigerator is around 4.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1007-1012
• /
• 2008

Demand for the highly efficient and high performance urban energy supply system having been continuously increased according to the rise of quality of life and continuously increased energy cost all over the world. The district heating and cooling system is very effective way for energy saving, cost reduction, and demand side management of energy. There are several district cooling supply technologies such as chilled water direct transportation, installation of absorption type chiller in the user side, and desiccant cooling. This study investigates the advantage and technical problems of each district cooling technology. Also, it is necessary political and financial support system for the extension of district cooling system.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1172-1177
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW steam supply and power generation system. Three different test geometries have been chosen for the numerical simulation. The existing design for 300 kW HRSG system (CASE B) has been improved by geometry and position changes of inlet guide vanes along with gas velocity entrance angle at the diverging channel inlet (CASE C). Both cases has been compared with the case where hot combustion gas is directly injected without any guide vanes (CASE A). Improved design shows overall uniform velocity and temperature distribution compared to existing design.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.14-14
• /
• 2004

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.267-271
• /
• 2010

Photovoltaic system simulator is under being developed for the performance test of Power conditioning system (PCS). The photovoltaic system simulator is required to emulate real system, which can be obtained by fast response controller. In this paper, we suggest a robust control method as a tool to design the simulator controller. The performance of the controller is determined by weighting functions, sensitivity function $W_1$ complementary sensitiviey function $W_3$, and a control signal shaping function $W_u$. Experimental results show that robust control method is promising for obtaining better performance of the photovoltaic system simulator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.860-865
• /
• 2014

This paper proposes the method for determination of the capacities of ESS (Energy Storage System) and PCS (Power Conditioning System) for the peak load shaving based on the load data in the substation of urban railway. In addition, this paper analyze the actual measurement of loads in the substation of urban railway. The load of a weekday in the substation of urban railway is high around rush hours in the morning and evening, which is different from that of a normal substation. The required capacities of ESS and PCS become larger as the amount of peak load shaving is higher, and are affected from the patterns of daily load in the substation.