• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.288-296
• /
• 2019

Radiation cooling has used ceilings or floors as cooling surfaces. In such cases, to avoid moisture condensation on the surface, the surface temperature needs be higher than the dew point temperature or an additional dehumidifier is added. In this study, with a goal for residential application, intentional moisture condensation on the cooling surface was attempted, which increased the cooling capacity and improved the indoor comfortness. This method included two separate refrigeration cycles - convection-type dehumidifying cycle and the panel cooling cycle. Test results on the panel cooling cycle showed that, at the standard outdoor ($35^{\circ}C/24^{\circ}C$) and indoor ($27^{\circ}C/19.5^{\circ}C$) condition, the refrigerant flow rate was 8.8 kg/h, condensation temperature was $51^{\circ}C$, evaporation temperature was $8.8^{\circ}C$, cooling capacity was 376 W and COP was 1.75. Furthermore, the panel temperature was uniform within $1^{\circ}C$ (between $13^{\circ}C$ and $14^{\circ}C$). As the relative humidity decreased, the cooling capacity decreased. However, the power consumption remained approximately constant. In the convection-type dehumidification cycle, the refrigerant flow rate was 21.1 kg/h, condensation temperature was $61^{\circ}C$, evaporation temperature was $5.0^{\circ}C$, cooling capacity was 949 W and COP was 2.11 at the standard air condition. When both the radiation panel cooling and the dehumidification cycle operated simultaneously, the cooling capacity of the radiation panel cycle was 333 W and that of the dehumidification cycle was 894 W, and the COP was 1.89. As the fan flow rate decreased, both the cooling capacity of the radiation panel and the dehumidification cycle decreased, with that of the dehumidification cycle decreasing at a higher rate. Finally, a possible control logic depending on the change of the cooling load was proposed based on the results of the present study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.376-383
• /
• 2019

This study was conducted to investigate academic self-efficacy, critical thinking disposition, and learning motivation, which influence problem solving ability in nursing students. Data were collected from June 4, 2018 to June 29, 2018, and the final 213 data points were used for analysis. The SPSS/WIN 22.0 program was used to conduct descriptive statics, Pearson's correlation coefficient, t-tests, ANOVA, Scheffe's test and multiple regression analysis. The problem solving ability according to the general characteristics differed among residential type (F=3.930, p=0.021) and satisfaction with major (F=4.618, p=0.011). In the correlation between academic self-efficacy, critical thinking disposition, learning motivation, and problem solving ability of the subject, academic self-efficacy (r=0.573, p<0.001), critical thinking disposition (r=0.620, p<0.001), and learning motivation (r=0.563, p<0.001). The factors affecting the problem solving ability of the study subjects were major satisfaction (${\beta}=.117$, p=0.036), academic self-efficacy (${\beta}=0.314$, p<0.001), critical thinking disposition (${\beta}=0.318$, p<0.001), and learning motivation (${\beta}=0.217$, p=0.004), with an explanatory power of 45.2%. In this study, it is necessary to confirm the effects of the development of the intervention program and the application of the program, which can improve the problem solving ability of nursing students.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.175-183
• /
• 2021

Gongjae Yoon DuSeo(1668~1715), from Haenam in the late Joseon Dynasty, is a scholar-born painter who was active during King Sukjong. He is the person who created the foundation as a pioneer of realist paintings in the late Joseon period during the transition from the middle to the latter period. He was born in Namin's prestigious family, but he ended his career as part of a partisan fight and immersed himself in painting and learning. 18C, the beginning of the late Joseon Dynasty, was a period when Silhak emerged and the Jinkyung era opened with awareness of nationalism. At this time, by incorporating the Silhak thought into the art world, the real reformed aesthetic consciousness was demonstrated to pioneer common people's customs, the application of Western painting methods, the pursuit of realist techniques, and the introduction of Namjongmuninhwa. His view of painting, who thoroughly learned the old things and pursued change, must have both the form and spirit that he can achieve 'HwaDo' only when it has the science of 'learning and knowledge' and the technical elements of 'practice and quality' emphasized. He has worked in a variety of reconciliations. In particular, portrait paintings are characterized by ihyeongsasin's realistic expressions of aesthetics. His masterpiece, 「Self-portrait」, excels in extreme-realistic depiction and innovation in composition, and stands out with an unconventional experimentation spirit that expresses his mind and thoughts in a painting with a sense of resentment. His landscape paintings combine to express the form as it is and mental notions, and beautifully embodied Do as a form, thus achieving ihyeongmido, which reached the level of'joyfulness forgotten even the heart of joy'. On the other hand, the generalization of the common people using various common people's lives as the subject of an open-mindedness aimed at gaining the facts of ihyeongsajin, a passive protest against corrupt power and an expression of a spirit of love. Since then, his painting style has been passed down from generation to generation to his eldest son Yoon Deok-hee and his grandson Yoon Yong, leading the change and revival of calligraphy art in the late Joseon Dynasty.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.319-327
• /
• 2020

Particulate matters (PM) are small particulate pollution that decrease the function of skin barrier, which causes inflammatory skin diseases and extrinsic aging. In this study, we evaluated the effect of preventing the adherence of PMs from several cosmetic products applied to human skin using iron oxide black. The PM floating chamber consists of skin exposure area, PM inlet, floating power device, and an outlet so that PM can be naturally attached to the skin while floating in the chamber. The change in skin brightness according to the floating concentration of alternative fine dust was checked to confirm the optimal floating concentration conditions. The intensity difference (before-after intensity, Δ) before and after adhesion of iron oxide black was proportional to the amount of PM adhered. The anti-adherence effect of iron oxide black on five cosmetic products were evaluated through 20 each subjects by comparing the amount of iron oxide black adhered on the control and treatment. The difference in brightness before and after the iron oxide black attached to the skin was calculated and compared with the control group(p < 0.05). When over 150 mg of iron oxide black was adhered on the skin, the interference of intensity was low and clearly showed the skin adhered pattern. According to the application of the five cosmetics, the intensity difference was significantly lower than the control group. This means that depending on the product, it prevented the attachment of iron oxide black. This study is a safe and useful method to confirm the prevention of PM skin adherence. In conclusion, cosmetics can prevent the adherence of PM on the skin according to the formulation or ingredients characteristics.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.136-143
• /
• 2021

Pacific island countries, including Kiribati, are suffering from a shortage of essential resources as well as a reduction in their living space due to sea level rise and coastal erosion from climate change, groundwater pollution and vegetation changes. Global activities to solve these problems are being progressed by the UN's efforts to implement SDGs. Pacific island countries can adapt to climate change by using abundant marine resources. In other words, seawater plants can assist in achieving SDGs #2, #6 and #7 based on SDGs #14 in these Pacific island countries. Under the auspice of Korea International Cooperation Agency (KOICA), Korea Research Institute of Ships and Ocean Engineering (KRISO) established the Sustainable Seawater Utilization Academy (SSUA) in 2016, and its 30 graduates formed the SSUA Kiribati Association in 2017. The Ministry of Oceans and Fisheries (MOF) of the Republic of Korea awarded ODA fund to the Association. By taking advantage of seawater resource and related plants, it was able to provide drinking water and vegetables to the local community from 2018 to 2020. Among the various fields of education and practice provided by SSUA, the Association hope to realize hydroponic cultivation and seawater desalination as a self-support project through a pilot project. To this end, more than 140 households are benefiting from 3-stage hydroponics, and a seawater desalination system in connection with solar power generation was installed for operation. The Association grows and supplies vegetable seedlings from the provided seedling cultivation equipment, and is preparing to convert to self-support business from next year. The satisfaction survey shows that Tarawa residents have a high degree of satisfaction with the technical support and its benefits. In the future, it is hoped that SSUA and regional associations will be distributed to neighboring island countries to support their SDGs implementations.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.476-484
• /
• 2022

This study was conducted to investigate the effect of closed cultivation and open cultivation method and substrate type on the nutrient ion change pattern and growth of sweet pepper (Capsicum annuum L.) 'Scirocco' according to the reuse of drainage in hydroponics. The sowing, transplanting, and application of the closed and open cultivation method were carried out on August 19 and September 16, and October 21, 2021, respectively. As a result of the analysis of nutrients in the drainage, Na⁺ and Cl^- are representative ions that crops do not absorb properly, and as the growth progresses, they are accumulated in the closed method. In addition, since the content of NH₄-N in the drainage is significantly lower than that of NO₃-N, it is thought that NH₄-N is preferentially absorbed rather than NO₃-N due to the ion selectivity of sweet pepper. The growth and fruit characteristics of sweet pepper did not differ significantly between treatments according to the drainage reuse and the type of substrate. In conclusion, if you take care of poor fruiting due to the weakening of power after the middle period in hydroponic cultivation of sweet pepper according to the cultivation method of closed and open, and the substrate type of coir and rock wool, the difference between treatments is not large, so the sweet pepper can be produced by selecting the cultivation methods and substrate types suitable for the conditions of grower. However, as interest in environmental pollution has recently increased, it is judged that there is no need to worry about a decrease in quantity or quality, even if a closed cultivation method is adopted under the assumption that pathogen infection due to drainage reuse is well managed. It is expected that if coir is applied instead of rock wool, which causes a problem of disposal, it will further contribute to the reduction of environmental pollution.

• Journal of Korean Philosophical Society
• /
• no.125
• /
• pp.63-89
• /
• 2019

The aim of this paper is to examine the so-called theory of automatic action attributed to Plotinus, according to which the sage can act automatically without deliberation or reasoning. Concerns were raised that such a theory runs the risk of turning the agent into an automaton by reducing action to mechanical reflexes to external stimuli. I attempt to show that Plotinus does not hold a theory of automatic action by arguing that the Plotinian sage's non-deliberative action is not automatic at all. For this purpose, I first draw attention to the non-deliberative action of the World-Reason (i.e. the reason of the World-Soul), which is supposed to present an ideal model of action. Indeed, Plotinus mentions that the World-Reason rules the world "as if automatically". This is, however, meant to indicate the spontaneous and natural manner in which the World-Reason rules. In this respect, the way the World-Reason works is compared to the way nature (i.e. the productive power of the World-Soul) works. But Plotinus points out that the World-Reason knows what to do, whereas nature works without knowing. In this connection, Plotinus makes it clear that the World-Reason does not calculate or deliberate about what to do because it already knows it. To clarify this point, I turn to Plotinus' analogy of practical wisdom (phronêsis) and skill, according to which the World-Reason is compared to an accomplished craftsman or artist, who confidently works without any doubt, hesitation or difficulty, thereby expressing her intelligence, unmediated by deliberation. From this perspective, non-deliberative action according to practical wisdom turns out to be superior to deliberative action. Plotinus admits that there are difficult circumstances in which even the skilled craftsman, unlike the World-Reason who always controls the whole situation, needs to deliberate or calculate, but he is nevertheless confident that the craftsman easily finds the solution. This suggests that the sage, who possesses practical wisdom, can act normally like a great master or virtuoso without deliberation, but in an emergency situation he also employs deliberation, but resourcefully and creatively responds to challenge. The attempt is made to elucidate the Plotinian model of sage's action with the help of Csikzentmihalyi's concept of 'flow' and Annas' application of it to the analogy of virtue and skill. Finally, it is shown that the sage's virtuous action, in spite of being a habituated action, is not a passive, routinized, automatic action, but an active, flexible, intelligent action.

• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.371-411
• /
• 2011

In the twenty first century of rapid cultural change performing art requires new mode of expression based on imaginative power and creativity as well as establishing its own identity. The modern technological environment support this with advanced technology and bring about the expansion of reason from new experience. The introduction of digital media on artistic expression in particular, expands the physical ability of human body which is the main subject of performing art. A virtual body from digital technology is freed from physical boundaries and goes over space and time. It also suggests the possibility of new mode of communication with audience. This study aims at examining the subject of performing art and its digitalized movement focusing on EveR, the world's first professional robot actor. The robot actor which came on stage according to the new expression medium, a digital body, stands in need not only of technological value but also of cultural and artistic application for expression in art. In this endeavor to meet the demand, this study examines the development process and function of 'EveR' the robot actor. Also it searches into the performance of Ever which replaced human being as well as the historical significance of the title:the world's first. To be more specific, there is a example research on two performances:a pansori play "EveR is simply stunning(2009)" and children's play "The Robot Princess and Seven Dwarfs(2009)." Through this example research, it is enabled to anticipate the influence of robot actors on performing arts and to search for the better way of them to evolve. Furthermore, it aims at finding ways to create high value through promoting robot actors to be familiar to the public as well as supporting them to become active cultural contents. The performance with robotic technology is one of the artistic experiment that may cause the change of the future of performing art by actualizing technological imagination together with human body and machinery. As a consequence, it is expected that the meeting of performing art and robotic technology gives positive influence on activating performing art as one of the integrated cultural phenomenon which satisfies the taste of modern era. Moreover, this study may also be the beginning of the expansion of performing art to stretch to diverse field.

• Korea Trade Review
• /
• v.48 no.4
• /
• pp.303-320
• /
• 2023

Recently, import and export companies have been using T/T remittance and Surrender B/L more frequently than L/C when selecting the process and method of trade payment settlement. The new trade and logistics environment is thriving in the era of the Fourth Industrial Revolution (4IR). Document-based trade transactions are undergoing a digitalization as bills of lading or smart contracts are being developed. The purpose of this study is to verify whether exporters choose export payment types based on negotiating factors. In addition, we would like to discuss the application of the characteristics of the new trade and logistics environment. Data for analysis was collected through surveys. The collection method consisted of direct visits to the company, e-mail, fax, and online surveys. The survey distribution period is from February 1, 2023, to April 30, 2023. The questionnaire was distributed in 2,000 copies, and 447 copies were collected. The final 336 copies were used for analysis, excluding 111 copies that were deemed inappropriate for the purpose of this study. The results of the study are shown below. First, among the negotiating factors, the product differentiation of exporters did not significantly affect the selection of export payment types. Second, among the negotiating factors, the greater the purchasing advantage recognized by exporters, the higher the possibility of using the post-transfer method. In addition to analyzing the results, this study suggests that exporters should consider adopting new payment methods, such as blockchain technology-based bills of lading and trade finance platforms, to adapt to the characteristics of the evolving trade and logistics environment. Therefore, exporters should continue to show interest in initiatives aimed at digitizing trade documents as a response to the challenges posed by bills of lading. In future studies, it is necessary to address the lack of social awareness in Korea by conducting advanced research abroad.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.