• 전기학회논문지P
• /
• 제57권3호
• /
• pp.225-230
• /
• 2008

Reactor starting method has the advantage of simplicity and closed transition in spite of lower starting torque per kVA. This method allows a smooth start with almost no observable disturbance on transition and is suitable for applications such as centrifugal pumps or fans. Reactive power doesn't contribute to work but needs to sustain the electromagnetic field required for the induction motor to operate. Starting power factor of induction motor is specially lower than running power factor. Power factor application is needed to compensate for the lower power factor of induction motor. This power factor compensation systems is occasionally being hit by the effects of the starting reactor connection position at the starting, stopping of high-voltage induction motor. This paper describes voltage and current stress affected by the installation position of power factor compensation application at the reactor starting method.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.458-468
• /
• 2013

Large capacity reactive power compensation and harmonic control in the low-voltage grid of an enterprise, are important technical means to improve power quality and reduce power loss. In this paper, the principle of an efficient power quality controller is analyzed. Then, key application technologies of the HPQC which would influence the performances of the HPQC are studied. Based on an analysis of the harmonic shunt problem, a frequency dividing control strategy of the HPQC continuous subsystem is proposed. A parameter design method of the HPQC discrete subsystem and its installation method are also proposed to ensure the system compensation effect. HPQC systems have been designed for a copper foil plant. The effectiveness of this paper has been verified by the simulation and application results.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2003년도 종합학술대회 논문집
• /
• pp.45-53
• /
• 2003

This paper addresses the issues related to the development of product model and applications fer nuclear power plants based on STEP and PLIB standards. The ISO standards which can be applied are; STEP(Standard for the Exchange of Product Model Data) AP(application protocol) 221/231, AP 230/225, AP 227, ISO 13584 PLIB, ISO 15926 RDL. The data models of the AP's and ISO 15926 RDL are reviewed and an application system is proposed to exchange and share the design data of the nuclear power plant.

• KIEE International Transactions on Power Engineering
• /
• 제4A권1호
• /
• pp.42-47
• /
• 2004

This paper presents the various application programs for the Distribution Automation System (DAS) of the Korea Electric Power Corporation (KEPCO)'s distribution system. These programs are developed to allow for optimal operation in the areas of feeder automation, relay coordination, loss minimization and so on. They are single line diagram auto creation programs for the feeder, service restoration program, protection coordination program, data error detection program, and optimal network reconfiguration program. The details of these programs are presented for validity and effectiveness.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.195-198
• /
• 2017

This research analyzed the electrical characteristics of an 80 V optimal trench power MOSFET (metal oxide field effect transistor) for mobile applications. The power MOSFET is a fast switching device in fields with low voltage(<100 V) such as mobile application. Moreover, the power MOSFET is a major carrier device that is not minor carrier accumulation when the device is turned off. We performed process and device simulation using TCAD tools such as MEDICI and TSUPREM. The electrical characteristics of the proposed trench gate power MOSFET such as breakdown voltage and on resistance were compared with those of the conventional power MOSFET. Consequently, we obtained breakdown voltage of 100 V and low on resistance of $130m{\Omega}$. The proposed power MOSFET will be used as a switch in batteries of mobile phones and note books.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권11호
• /
• pp.411-418
• /
• 2016

상황인지 어플리케이션은 다양한 센서를 이용하여 상황을 추론하므로 전력 소비가 크고 이에 대한 상세한 평가 결과를 제공하는 연구는 미비하였다. 또한 기존의 전력 소비에 대한 정보는 사용자의 사용 패턴을 고려하지 못하고 전체적인 소비량만을 제공하거나, 센서가 사용하는 전력에 대한 정보를 구분하여 제공하지 못하였다. 그렇기 때문에 개발자들이 전력 소비를 고려하여 어플리케이션을 개발하는 데 유의미한 정보가 제공되지 않았다는 문제점이 있다. 개발자들에게 상황인지 어플리케이션이 사용하는 모바일 디바이스의 컴포넌트가 소비하는 전력에 대한 상세한 평가 정보가 제공된다면, 전력 소비를 고려하여 상황인지 어플리케이션의 개발이 가능해 질 것이다. 본 논문에서는 사용자의 사용 패턴을 고려하여 상황인지 어플리케이션의 작동 시 사용되는 다양한 컴포넌트가 소비하는 전력을 평가할 수 있는 BMT(Bench Mark Test) 모델을 제안하고, 이를 통한 상세한 평가 결과를 개발자들에게 제공하고자 한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권7호
• /
• pp.458-461
• /
• 2005

Power dissipated during test application is substantially higher than power dissipated during functional operation which can decrease the reliability and lead to yield loss. This paper presents a new technique for power minimization during test application in full scan sequential circuits. This paper shows freezing of combinational logic parts during scan shift operation in test mode. The freezing technique leads to power to minimization. Significant power reduction in the scan techniques is achieved on ISCAS 89 benchmarks.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.131-131
• /
• 2001

FY2000, Japanese government has started three new projects on superconductive power application. Two are succeeding projects of flywheel energy storage and superconducting generator. The other one is fully new project on ac application of superconductivity. Therefore, there are four national projects in Japan on power application of superconductivity, including SMES project Though each project will be reviewed in detail in my talk, outlines are as follows; SMES : FY1999-FY2003, carried by ISTEC Superconducting generator: FY2000-FY2003, carried by Super-GM AC application: FY2000-FY2004, carried by Super-GM Flywheel energy storage: FY2000-FY2004 carried by ISTEC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.421-423
• /
• 2003

To prevent fault effect in supply of electric power distribution system and plan stable operation of electric power system, must control magnitude of fault current. Although there are various kinds of method to solvethis, approached from super conductivity Fault Current Limiter application viewpoint among them. High Temperature Superconductor-Fault Current Limiter (HTS-FCL) development is progressing according to HTS technology development, and system application is tried. For actual system application of such super conductivity FCL, so that can reflect special quality of actuality supply of electric power distribution system just as it is in this treatise supply of electric power system by two modelling do. Also, by simulation of HTS-FCL action and protection coordination with another equipment appliances, verified the effectiveness in supply of electric power system applying itself super conductivity FCL EMTDC dynamic characteristic model that is develope.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.300-304
• /
• 2017

Due to the introduction of various types of dispersed generations (DGs) with larger capacity in a power distribution system, the short-circuit current is expected to be increased, which more requires for the effective fault current limiting methods. As one of the promising countermeasures, the superconducting fault current limiter (SFCL) has been noticed. However, the decreased fault current by SFCL affects the operation of the overcurrent relay (OCR), representative protective device in a power distribution system. In this paper, the operation of the overcurrent relay due to the application of a SFCL in a power distribution system with DG linked by its bus line was analysed through the short-circuit tests. To analyze the effect of the SFCL application in a power distribution system with DG, the experimental simulated circuits were designed and the short-circuit tests for the power distributed system assembled with the DG, the OCR and the SFCL were carried out. Through the analysis on the short-circuit tests, the application of the SFCL in a power distribution system with DG could be confirmed to be contributed to the operational improvement of overcurrent relay.