• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.303-309
• /
• 2019

A hybrid control of a rectifier/regulator of wireless power transfer systems for electric vehicles is studied. A combined rectifier/regulator is used for charging control. The hybrid control comprises integral cycle control and pulse width modulation control to cope with the variations in the induced voltage due to clearance and alignment. The hybrid control has good control capability and does not cause severe switching loss. A 22 kW prototype of the Wireless Power Transfer class 4 charging system defined by the Society of Automotive Engineers is constructed and tested to verify the proposal.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.277-288
• /
• 2018

Wireless inductive power transfer (IPT) technology is used in many applications today. A compact and high-frequency primary side inverter is one of the most important parts of a WPT system. In this study, a modified class EF-type voltage-fed multi-resonant inverter has been proposed for WPT application at a frequency range of 85-100 kHz. Instead of an infinite input choke inductor, a resonant inductor is used to reduce loss and power density. The peak voltage stress across the MOSFET has been reduced to almost 60% from a class-E inverter using a passive clamping circuit. A simple yet effective design procedure has been presented to calculate the various component values of the proposed inverter. The overall system is simulated using MATLAB/SimPowerSystem to verify the theoretical concepts. A 500-W prototype was built and tested to validate the simulated results. The inverter exhibited 90% efficiency at nearly perfect alignment condition, and efficiency reduced gradually with the misalignment of WPT coils. The proposed inverter maintains zero-voltage switching (ZVS) during considerable load changes and possesses all the inherent advantages of class E-type inverters.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2202-2211
• /
• 2016

In certain applications, such as IPT-based EV charger (IPTEC), any variation in alignment and distance between pickup and charger primary leads to a change in leakage and magnetic impedance magnitudes. The power transmission capacity is not always at the maximum level because of these variations. This study proposes a new low-cost tracking method that achieves the Maximum Inductive Power Transmission Capacity (MIPTC). Furthermore, in the proposed method, the exchange of information between load and source is not required. For an application such as IPTEC, the load detected by the IPTEC varies continuously with time because of the change in state of the charge. This load variation causes a significant variation in IPT resonant circuit voltage gain. However, the optimized charging output voltage should be kept constant. From the analysis of the behavior of the IPT circuit at different working frequencies and load conditions, a MIPTC operation point that is independent of load condition can be identified. Finally, the experimental results of a developed prototype IPT circuit test show the performance of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.558-563
• /
• 2008

Optical axis misalignment, which represents the position deviation of the objective lens from the optical axis, is an inevitable assembly error in an optical pick-up. Since the laser power intensity varies with respect to the distance from the optical axis, the misalignment leads to variation of the laser spot power intensity, which is one of the critical factors increasing data bit-error-rate in optical disc drives. In this paper, an auto-adjustment scheme for optical axis alignment is proposed to eliminate the undesirable variation of the laser spot power intensity in optical disc drives. An envelope of the data RF signal is extracted and utilized to detect the optical axis misalignment. Then an adjustment input is added to the driving input of the tracking actuator to shift the objective lens to the optical axis. Finally, the feasibility is verified by experiments.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제13권1호
• /
• pp.21-30
• /
• 2024

최근 자율주행차 시장이 지속해 성장함에 따라 충전 인프라에 대한 필요성이 커지고 있다. 그러나 무선 충전 시스템의 경우 기존 유선 충전에 비해 대출력이 요구되어 안정성 문제가 제기되고 있다. 자율주행차 무선 충전 인프라를 구축하기 위한 표준으로는 SAE J2954가 존재하며 해당 표준에서는 차량과 전력 전송 시스템 간의 통신 방법에 대해 정의한다. SAE J2954에서는 자율주행차량의 무선 충전 통신 방법으로 Wi-Fi, Bluetooth 및 UWB와 같은 물리적 미디어를 사용해 차량과 충전 패드 간의 통신을 활성화할 것을 권장한다. 특히 UWB는 실내 환경에서 견고한 통신 능력을 보이고 간섭에 민감하지 않기 때문에 실내외 충전 환경에서 적합한 솔루션이다. 해당 표준에서는 무선전력전송 시스템을 구축하기 위한 프로세스로 충전 시작부터 충전 완료까지를 여러 단계로 구분하였다. 본 연구에서는 UWB 기술을 사용하여 무선전력전송 시스템의 한 가지 프로세스인 Fine alignment의 수단으로 사용한다. 실제 자율주행차 무선전력전송 시스템에 적용 가능성을 판단하기 위해 거리에 따라 실험을 수행하였으며 UWB로부터 거리 정보를 수집하였다. UWB로부터 얻어진 거리 데이터의 정확도를 향상시키기 위해 수집한 데이터를 세 단계의 전처리 과정을 거쳐 머신러닝과 딥러닝 기법을 적용한 Single Model과 Multi Model을 제안한다.

• 스마트미디어저널
• /
• 제3권1호
• /
• pp.22-27
• /
• 2014

전 세계적으로 석유자원의 고갈로 인해 석유가격의 상승 및 중국, 인도 등 거대개도국의 에너지 수요 폭발로 국내외 에너지환경은 새로운 도전과 변화의 국면에 처해 있다. 그러나 태양광 발전은 기존 발전방식에 비하여 발전 단가가 높고 에너지 밀도가 희박하여 일정한 전력을 이용하기 위해서는 넓은 면적의 태양전지모율 설치 장소가 필요하다. 또한 기상조건 및 자연조건에 절대적인 영향을 받기 때문에 태양광 발전의 효율적인 발전을 위해서는 지리적인 위치와 태양의 위치 등을 고려하여 태양전지모듈이 지속적으로 많은 양의 발전을 할 수 있게 하는 기술이 필요하다. 이에 본 연구에서는 기존 추적 시스템의 문제점을 해결하기 위해 새로운 형태의 태양 추적 시스템을 제안하고자 한다. 또한 제안된 기법의 유용성을 확인하기 위해 제작된 시제품에 알고리즘을 구현하여 실제 실험을 수행하고자 한다.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.652-659
• /
• 2016

In this study, the efficiencies for both the angular aligned and unaligned positions of the receiver and transmitter coils of wireless power transfer (WPT) systems are examined. Some parameters of the equivalent circuit were calculated with Maxwell 3D software. The analytical solution of the circuit was calculated in MATLAB program through the composition of the system's mathematical modeling. The numerical solution of the system, however, was calculated using PSIM, which is circuit simulation software. In addition, with the use of the finite element method (FEM) in Maxwell 3D software, transient analysis of the three-dimensional system was performed. The efficiency of the system was estimated through the calculation of input and output power. The results demonstrated that power was efficiently transmitted to a certain extent in aligned and unaligned positions. The results also revealed that, for aligned positions, high efficiency with air gaps of 15-20 cm can be obtained and that the efficiency quickly dropped with air gaps of more than 20 cm. For spatially unaligned positions, it was observed that wireless power transfer could be realized with high efficiency with air gaps of up to 10 cm and that efficiency quickly dropped with air gaps of more than 10 cm.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 임시총회 및 하계학술연구발표회
• /
• pp.35-35
• /
• 2014

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.1-3
• /
• 1999

The implementation of the compact gearless elevator system with Permanent Magnet Synchronous Motor is presented. For the purpose of the voltage suppression in the motor input side, the LRC filter is used. The automatic encoder alignment algorithm with rotor pole position is developed, and it is available in the full range of the load. The implemented system makes 11% energy savings comparing the system with the induction motor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.539-543
• /
• 2001

Almost all rotating machinery has bearings. Bearing is one of the most important part of rotating machinery. Vibration of rotating machinery depend on its bearing conditions. Bearing conditions are followings ; oil gap, bearing type, bearing temperature, bearing oil condition. Especially, bearing oil condition influences on rotating machinery vibration directly. In this paper we have discussed the abnormal vibration of turbine due to oil condition. oil whip problem was occured in the certain power plant. and we had sloved this problem through the control of operating values and alignment.