• Journal of Advanced Marine Engineering and Technology
• /
• 제40권3호
• /
• pp.191-197
• /
• 2016

선박이 고출력화, 대형화 됨에 따라 추진축의 강성은 증가한 반면에 선체는 고장력 후판을 사용하므로 이전의 선체보다 훨씬 더 쉽게 변형되는 실정이다. 흘수변화에 따른 선체변형은 축계를 구성하는 각각의 베어링 옵셋 및 반력에 연쇄적인 영향을 미치게 된다. 이는 기존의 선박보다 더욱 정교한 축계정렬이 요구됨을 의미한다. 본 연구에서는 최근 친환경 고효율 선박으로 등장한 5만 DWT급 석유화학제품운반선을 대상으로 선박의 흘수 변화에 따른 선미부 구조해석을 실시하고 구조해석으로부터 얻어진 축계의 상대변위를 이용하여 축계정렬 해석을 수행하였다. 구조해석은 선박의 통상 운항조건에서 최대 흘수 변화를 고려한 2개 조건에서 수행하였다. 이를 바탕으로 선체변형에 따른 베어링 옵셋 변화가 축계정렬에 미치는 영향을 검토하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.42-42
• /
• 2008

Considerable attention has been focused on the applications of flexible liquid crystal (LC)-based displays because of their many potential advantages, such as portability, durability, light weight, thin packaging, flexibility, and low power consumption. To develop flexible LCDs that are capable of delivering high-quality moving images, like conventional glass-substrate LCDs, the LC device structure must have a stable alignment layer of LC molecules, concurrently support uniform cell gaps, and tightly bind two flexible substrates under external tension. However, stable LC molecular alignment has not been achieved because of the layerless LC alignment, and consequently high-quality images cannot be guaranteed. To solve these critical problems, we have proposed a PDMS pixel-wall based bonding method via the IB irradiation was developed for fasten the two substrates together strongly and maintain uniform cell gaps. The effect of the IB irradiation on PDMS with PI surface was also evaluated by side structure configuration and a result of x-ray photoelectron spectroscopic analysis of PDMS interlayer as a function of binder with substrates. large number of PDMS pixel-walls are tightly fastened to the surface of each flexible substrate and could maintain a constant cell gap between the LC molecules without using any other epoxy or polymer. To enhance the electro-optical performance of the LC device, we applied an alignment method that creates pretilt angle on the PI surface via ion beam irradiation. Using this approach, our flexible LCDs have a contrast ratio of 132:1 and a response time of about 15 ms, resulting in highly reliable electro-optical performance in the bent state, comparable to that of glass-substrate LCDs.

• 한국통신학회논문지
• /
• 제39A권3호
• /
• pp.161-163
• /
• 2014

K개의 셀과 각 셀에서 2개의 단말간 직접 통신(device-to-device communication: D2D communication) 링크 간에 셀룰러 하향 링크 자원을 재사용하는 다중셀 간섭 시스템에 중첩되어 있는 D2D 통신 모델을 고려한다. 본 논문에서는 현재의 셀 또는 인접 셀에 간섭을 미치지 않는 다수 개의 링크를 선택하거나 또는 전력 제어를 통해 다수 개의 링크가 어떤 기지국에도 간섭을 미치지 않는다고 가정했을 때, 간섭 정렬(interference alignment: IA)를 통해 셀간 및 셀 내의 하향링크 간섭을 효과적으로 없앨 수 있다는 것을 보인다. 특히, 2개의 D2D 통신 쌍에 대해서는 간섭채널에서 이론적으로 가능한 최대 자유도를 실현할 수 있는 방법을 제시하며, 기지국과 모든 단말의 송신 및 수신 안테나 개수가 각각 M일 때 그 자유도는 (K+1)M로 주어지는 것을 보인다.

• 한국통신학회논문지
• /
• 제31권11A호
• /
• pp.1053-1058
• /
• 2006

본 논문은 GE-PON 등 FTTH용 광액세스망 시스템에 사용되는 저가격 광모듈 제작을 위하여, 1.31/1.49um 양방향 구성의 하이브리드집적 PLC칩을 사용한 효율적인 광모듈 패키징 기술을 제안하였다. 수동 광섬유정렬기술과 nonhermetic 플라스틱 패키지 기술을 적용하여 광모듈을 제작하였으며, 광결합효율과 전기-광학적 특성을 측정하였다. 제작된 광모듈의 광결합효율은 광축정렬 허용오차 40um내에서 0.5dB이하의 광결합손실을 나타내었고, -24dBm 이하의 수신감도와 광출력 1.5mW이상, 소광비 10dB이상, tracking error 0.3dB이하의 온도특성이 GE-PON ONU용 광모듈 규격을 만족함을 확인하였다.

• Communications for Statistical Applications and Methods
• /
• 제19권1호
• /
• pp.77-84
• /
• 2012

반복이 있는 랜덤화 블록 계획법을 검정하는 비모수 검정방법에는 Mack과 Skillings (1980)가 제안한 검정법이 있다. 이 방법은 각 블록의 처리에서 반복된 각 관측값 대신에 반복된 관측값들의 평균을 이용하여 순위를 매기기 때문에 정보의 손실이 있을 수 있다. 본 논문에서는 Hodges와 Lehmann (1962)이 제안한 정렬방법을 이용하여 새로운 비모수 검정법을 제안한다. 또한 모의실험을 통하여 여러 비모수 검정방법들의 검정력을 비교하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1130-1132
• /
• 2009

We propose a novel way for enhancement of efficiency on a quasi solid-state dye-sensitized solar cell (DSSC). It contained gel type electrolyte mixing the liquid crystal (LC) of specific concentration and applied voltage for alignment of the LC. Aligned LC is supported charge transfer inside electrolyte and efficiency is increased in DSSC. We made a quasi solid-state DSSC which applied DC voltage or not and have measured the power conversion efficiency (PCE) and the fill factor. From measurement, we obtain high performances in case of cell applied voltage compare to reference cell.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.287-289
• /
• 1993

Recently semiconductor technology is widely used in biotechnology fields and one of the represetatives is electric cell-fusion-device. In this paper. some basic researches required in the development of this fusion system was performed and they are as follows: 1) preparation of protoplast and selection of the fittest plant cell, 2) development of high frequency AC power supply for cell-alignment by using class-E resonant circuit. As a result, cabbage cell is selected and pearl-chain, which shows cell-alignment. can be observed by the applied AC field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1610-1612
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for vehicle such as the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. Also, a model of power collector and parallel winding structure and a model of concentration/decentralization winding are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.313-321
• /
• 2014

A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

• 말소리와 음성과학
• /
• 제6권3호
• /
• pp.149-153
• /
• 2014

In frequency domain ICA, the frequency bin permutation problem falls off the quality of separated signals. In this paper, we propose a new algorithm to solve the frequency bin permutation problem using the covariance of power ratio of separated signals in multi-channel FD-ICA. It makes use of the continuity of the spectrum of speech signals to check if frequency bin permutation occurs in the separated signal using the power ratio of adjacent frequency bins. Experimental results have shown that the proposed method could fix the frequency bin permutation problem in the multi-channel FD-ICA.