• 자원리싸이클링
• /
• 제10권4호
• /
• pp.18-23
• /
• 2001

페놀을 함유한 폐 활성탄의 가열 재생시 대기 오염물인 페놀이 생성되어 환경을 오염시키므로 발생하는 페놀 제거에 대한 검토가 필요하다 본 연구에서 실험에 사용하여 페놀을 함유한 S.회사 활성탄(WS-GAC), C.회사 활성탄(WC-GAC), L.회사 활성탄(UL-GAC)의 전해산화는 정전위 전해방식으로 실험하였다. 시료에 함유된 페놀농도는 100 rng/g, 지지 전해질은 1.0% 염화나트륨 용액, Ti-Ir(10$\times$10$ extrm{cm}^2$)전극 간격은 2 cm,전류밀도는 $1.25 A/dm^2$인 조건에서 실험이 이루워졌을 경우 전해 산화 실험에서 얻은 결과 페놀의 잔류물은 검출되지 않았다. 그러므로 전해산화 반응에서 빈응시간, 전류밀도, 지지전해질의 농도, 전극간의 거리가 60 minutes, 1.25 $A/dm^2$, 1.0%, 2 cm 임을 알 수 있었다.

• 자원리싸이클링
• /
• 제26권4호
• /
• pp.34-41
• /
• 2017

황산용액에 함유된 망간(II)의 농도가 Pb-Ag양극의 산화거동에 미치는 영향을 1.8에서 2.0 V의 범위에서 정전위법으로 조사하였다. 산화전위가 높고 망간의 초기 농도가 낮은 조건에서는 망간(III)의 농도가 높았으며, 산화반응 후 용액을 분광학적으로 분석하여 이를 확인하였다. 1.8과 1.9 V에서는 $MnO_2$가 망간(II)의 산화에 의해 생성되나, 2.0 V에서는 망간(III)의 불균등화반응에 의해 형성되었다. 1.8 V에서 용액에 망간(II)이 존재하면 정전위조건에서 산화시킬 때 납이 $PbO_2$로 산화되지 않았다. 그러나 1.9와 2.0 V에서는 망간(II)농도가 증가함에 따라 $PbO_2$가 망간(II)에 의해 화학적으로 환원되어 $PbO_2$의 양이 감소하였다.

• 한국재료학회지
• /
• 제13권9호
• /
• pp.625-630
• /
• 2003

Increasing environmental concerns require to solve the problem produced due to the use of heavy metals in coating formulations. Therefore, it is necessary to develop new coating strategy employing inherently conducting polymers such as Polyaniline(PANI). Polyaniline films were electrosynthesized by oxidation of aniline on cold rolled and weathering sheets using the potentiostatic mode from an aqueous oxalic acid medium. Potentiodynamic polarization curves were obtained for cold rolled and weathering sheets in the aqueous solution of 3% sodium chloride. The structure and properties of polyaniline film were elucidated using SEM, DSC, SST. A high corrosion resistance of polyaniline films were observed with a gain of the corrosion potential around 600-900 mV positive in the substrate covered with polyaniline than in the case without it.

• Journal of Electrochemical Science and Technology
• /
• 제2권2호
• /
• pp.76-84
• /
• 2011

Potentiostatic oxidation of Pb-1.7%Sb alloy used in the manufacture of grids of lead-acid batteries over the potential range from -1.0V to 2.3V in 5M $H_2SO_4$ in the absence and the presence of 0.4M $H_3PO_4$ and the self-discharge characteristics of the oxide layer formed is studied by electrochemical impedance spectroscopy (EIS). Depending on the potential value, sharp variations in resistance and capacitance of the alloy are recorded during the oxidation and they can be used for identification of the various substances involved in passive layer. Addition of $H_3PO_4$ is found to deteriorate the insulating properties of the passive layer by the retardation of the formation of $PbSO_4$. $H_3PO_4$ completely inhibits the current and impedance fluctuations recorded in $H_3PO_4$-free solutions in the potential range 0.5 V-1.7 V. These fluctuations are attributed to the occurrence of competitive redox processes that involve the formation of $PbSO_4$, $PbOSO_4$, PbO and $PbO_2$ and the repeated formation and breakdown of the passive layer. Self-discharge experiments indicate that the amount of $PbO_2$ formed in the presence of $H_3PO_4$ is lesser than in the $H_3PO_4$-free solutions. The start of transformation of $PbSO_4$ into $PbO_2$ is greatly shortened. $H_3PO_4$ facilitates the diffusion process of soluble species through the passive layer ($PbSO_4$ and basic $PbSO_4$) but impedes the diffusion process through $PbO_2$.

• 전기화학회지
• /
• 제17권3호
• /
• pp.179-186
• /
• 2014

Methanol electro oxidation on the surface of carbon paste modified by $NiCl_2/6H_2O$ was studied in 1M NaOH by potentiostatic and potentiodynamic methods. Ni/C catalyst by the concentration of 5% Ni showed about twice higher electro catalytic activity than Ni metal. The amount of monolayer's on the surface of electrode is almost one order higher for Ni/C than Ni electrode. The kinetic parameters and the diffusion coefficient of methanol were derived from chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) measurements.

• 대한화학회지
• /
• 제66권6호
• /
• pp.436-441
• /
• 2022

나노 다공성 구조를 가지는 전극은 매우 큰 전기화학적 표면적을 지니기 때문에 그 형성 방법에 대한 연구가 다양하게 이루어져 왔다. 본 논문에서는 정전위 양극 산화를 이용하여 초미세전극(ultramicroelectrode, UME) 표면에 나노 다공성 금(nanoporous gold, NPG) 구조를 도입하는 방법을 연구하였다. 1M KCl을 포함하는 0.1M 인산완충용액(pH 8)에서 1.3 V의 정전위를 가해 주면 잘 정의된 NPG 구조가 UME 표면에 도입되었다. NPG-UME 형성에서 인가 전위와 반응 시간, 그리고 전극의 크기가 형성된 NPG 전극의 거칠기 인자(roughness factor, R_f)에 미치는 영향을 관찰하여 양극 산화 효율을 조사하였다. 10분 정도의 짧은 시간에 2000정도의 큰 R_f 값을 가지는 NPG-UME를 만들 수 있었는데, 전기화학적 글루코오스 검출에 효과적으로 활용 가능하였다. 본 연구 결과는 적은 시료양으로 전기화학적 분석을 수행하는 경우 응용성이 클 것으로 기대한다.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.10-18
• /
• 2010

Controlled electrodeposition of dendritic nano-structured gold-platinum (AuPt) alloy onto an electrochemically pretreated carbon paper substrate was conducted in an attempt to improve catalyst utilization and to secure an electronic percolation network toward formic acid (FA) fuel cell application. The AuPt catalysts were obtained by potentiostatic deposition. AuPt catalysts synthesized as bimetallic alloys with 60% Au content exhibited the highest catalytic activity towards formic acid electro-oxidation. The origin of this high activity and the role of Au were evaluated, in particular, by XPS analysis. Polarization and stability measurements with 1 mg $cm^{-2}$ AuPt catalyst (only 0.4 mg $cm^{-2}$ Pt) showed 52 mW $cm^{-2}$ and sustainable performance using 3M formic acid and dry air at $40^{\circ}C$.

• 전기화학회지
• /
• 제8권1호
• /
• pp.17-23
• /
• 2005

$Bi_2O_3$를 첨가한 8M KOH용액에서 다결정 Ag전극의 전기화학적인 거동과 생성된 산화물들의 미세조직 변화를 분석하였다. $Bi_2O_3$를 첨가한 8M KOH용액에서 Ag 산화물뿐만 아니라 새로운 Ag-Bi-O화합물들이 생성되는 것을 알 수 있었다. Ag(I) 산화물 생성 전위 영역에서는 $Ag_2O$ 이외에, Ag-Bi-O 화합물이 핵 생성과 3D성장 과정에 의해서 생성되고, Ag(II)산화물 생성 전위 영역에서는 AgO뿐만 아니라 새로운 Ag-Bi-O화합물들이 핵 생성과 3D성장 과정에 의해서 생성되었다. Ag(I) 산화물 생성 전위에서 두 가지 형상의 Ag(I) 산화물이 생성되는 것을 SEM 조직에 의해 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제9권4호
• /
• pp.248-251
• /
• 1988

Mechanism of electrochemical polymerization of pyrrole (Py) on a Pt electrode in acidic aqueous solutions was studied by means of potentiostatic measurements, cyclic voltammetry and chronopotentiometry. Pyrrole molecule appeared to be initially oxidized via two-electron transfer step to produce oxidized pyrrole ion ($Py^+$), which was coupled with a non-oxidized pyrrole to yield a dimerized species, Py-Py. The Py-Py thus formed was further oxidized again via two-electron transfer step, which was followed by coupling with non-oxidized monomer and by concomitant expulsion of a $H^+$. Then the latter chain extension process was repeated. The chain extension and polypyrrole oxidation reactions occurred competitively.

• 한국분말재료학회지
• /
• 제17권3호
• /
• pp.216-222
• /
• 2010

Self-standing $TiO_2$ nanotube arrays were fabricated by potentiostatic anodic oxidation method using pure Ti foil as a working electrode and ethylene glycol solution as electrolytes with small addition of $NH_4F$ and $H_2O$. The influences of anodization temperature and time on the morphology and formation of $TiO_2$ nanotube arrays were investigated. The fabricated $TiO_2$ nanotube arrays were applied as a photoelectrode to dye-sensitized solar cells. Regardless of anodizing temperature and time, the average diameter and wall thickness of $TiO_2$ nanotube show a similar value, whereas the thickness show a different trend with reaction temperature. The thickness of $TiO_2$ nanotube arrays anodized at $20^{\circ}C$ and $30^{\circ}C$ was time-dependent, but on the other hand its at $10^{\circ}C$ are independent of anodization time. The conversion efficiency is low, which is due to a morphology breaking of the $TiO_2$ nanotube arrays in manufacturing process of photoelectrode.