• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.775-778
• /
• 2008

In general, forecast tsunami heights announced for tsunami warning are computed by using a linear tsunami model with coarse grids which leads the underestimation of inundation area. Thus, an accurate tsunami inundation map corresponding to the forecast tsunami height is indispensible for an emergency evacuation plan. A practical way to construct a relatively accurate tsunami inundation map was proposed in this study for the quantitative forecast of inundation area. This procedure can be introduced as in the followings: The fault dislocations of potential tsunami sources generating a specific tsunami height near an interested area are found by using a linear tsunami model. Based on these fault dislocations, maximum inundation envelops of the interested area are computed and illustrated by using nonlinear inundation numerical model. In this study, the tsunami inundation map for Imwon area was constructed according to 11 potential tsunami sources, and the validity of this process was examined.

• 한국해안·해양공학회논문집
• /
• 제22권5호
• /
• pp.287-294
• /
• 2010

본 연구에서는 지진해일 실시간 정량 대응을 위해 발생원 위치 및 지진규모에 따른 해안침수예상도 작성 방법을 제안하였으며 그 방법은 다음과 같다. 관심지역에 지진해일 피해를 발생시킬 것으로 예상되는 발생원을 선정하고 지진규모에 따른 수치모의를 수행하여 각 발생원별 지진규모별 침수예상도를 작성하는 것이다. 본 연구에서는 시범적으로 동해안 임원항을 대상으로 일본 서안에 위치한 11개의 잠재 지진해일 발생원과 7개의 지진규모에 대하여 침수예상도를 작성하였다.

• 한국해안·해양공학회논문집
• /
• 제20권2호
• /
• pp.194-202
• /
• 2008

일반적으로 지진해일 경보 발령 시 예상해일고를 산정하기 위해 큰 격자의 선형모형을 사용하게 되므로 범람역이 과소 산정된다. 그러므로 비상대피 계획을 위해 예보해일고에 상응하는 정도 높은 범람도를 필요로 한다. 본 연구에서는 범람역의 정량예보를 위해 상대적으로 정도 높은 지진해일 범람도를 작성하는 실용적인 방법을 제안하였다. 이 방법은 다음과 같다. 선형 지진해일 수치모형을 사용하여 대상지역 주변에 특정 지진해일고를 유발시키는 잠재 지진해일 발생원의 단층 변위를 산정한다. 이렇게 구해진 단층 변위에 대해 비선형 범람 수치모형을 이용하여 대상지역의 최대 침수포락선을 계산하고 범람도를 작성한다. 본 연구에서는 임원항을 대상지역으로 11개의 잠재 지진해일 발생원에 대해 예상범람도를 작성하여 제안된 기법의 타당성을 검토하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3064-3094
• /
• 2018

Currently, the Underwater Sensor Networks (UWSNs) is mainly an interesting area due to its ability to provide a technology to gather many valuable data from underwater environment such as tsunami monitoring sensor, military tactical application, environmental monitoring and many more. However, UWSNs is suffering from limited energy, high packet loss and the use of acoustic communication. In UWSNs most of the energy consumption is used during the forwarding of packet data from the source to the destination. Therefore, many researchers are eager to design energy efficient routing protocol to minimize energy consumption in UWSNs. As the opportunistic routing (OR) is the most promising method to be used in UWSNs, this paper focuses on the existing proposed energy efficient OR protocol in UWSNs. This paper reviews the existing proposed energy efficient OR protocol, classifying them into 3 categories namely sender-side-based, receiver-side-based and hybrid. Furthermore each of the protocols is reviewed in detail, and its advantages and disadvantages are discussed. Finally, we discuss potential future work research directions in UWSNs, especially for energy efficient OR protocol design.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.11-25
• /
• 2015

The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011, caused by an earthquake and a subsequent tsunami, resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation, leakage from primary containment boundary to the reactor building, improper functioning of standby gas treatment system (SGTS), unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous, aqueous, and solid materials available for interaction, e.g., gas components, decontamination paint, aerosols, and water pools. In the light of the Fukushima accident, additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally, as more and more passive safety systems, such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors, identified hydrogen and fission product issues will need to be coupled with the operation of passive safety systems in phenomena oriented and coupled effects experiments. In the present paper, potential hydrogen and fission product issues raised by the Fukushima accident are discussed. The discussion focuses on hydrogen and fission product behavior inside nuclear power plant containments under severe accident conditions. The relevant experimental investigations conducted in the technical scale containment THAI (thermal hydraulics, hydrogen, aerosols, and iodine) test facility (9.2 m high, 3.2 m in diameter, and $60m^3$ volume) are discussed in the light of the Fukushima accident.