• 제목/요약/키워드: potential evaporation

검색결과 178건 처리시간 0.024초

Pentacene을 활성층으로 이용한 유기 TFT의 특성 연구 (Study on the Characteristics of Organic TFT Using Pentacene as a Active Layer)

  • 김영관;손병청;김윤명;표상우
    • 한국응용과학기술학회지
    • /
    • 제18권3호
    • /
    • pp.191-196
    • /
    • 2001
  • Organic semiconductors based on vacuum-deposited films of fused-ring polycyclic aromatic hydrocarbon have great potential to be utilized as an active layer for electronic and optoelectronic devices. In this study, pentacene thin films and electrode materials were deposited by Organic Molecular Beam Deposition (OMBD) and vacuum evaporation respectively. For the gate dielectric layer, photoacryl (OPTMER PC403 from JSR Co.) was spin-coated and cured at $220^{\circ}C$. Electrical characteristics of the device were investigated, where the channel length and width was 50 ${\mu}m$ and 5 mm. It was found that field effect mobility was 0.039 $cm^{2}V^{-1}s^{-1}$, threshold voltage was -8 V, and on/off current ratio was $10^{6}$. Further details will be discussed.

Numerical Study of SF6 arc with Copper Contamination

  • Liau Vui-Kien;Lee Byeong-Yoon;Song Ki-Dong;Park Kyong-Yop
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제5C권6호
    • /
    • pp.233-241
    • /
    • 2005
  • The present model of a SF6 arc accounts for the copper vapour contamination from the electrodes inside a Laval nozzle of a circuit breaker. Steady state simulations have been done for the arc with electrode gap of 60mm and DC electric current of 500A, 1000A and 1500A for both cases with and without copper contamination. The effects of electrode polarity are considered for the arc current of 1000A. It was found out that evaporation of copper from the anode results in a cooling of the arc in a region close to the electrodes. The electrical potential across the electrodes is not sensitive to the presence of copper vapour, typically less than $4\%$ difference. Transient analysis has been done in order to obtain the arc properties at current zero. The arc current is increased linearly from -1000 to 0A when the upstream electrode is cathode with constant dI/dt of $27.0A/{\mu}s$ (or decreased linearly from 1000 to 0A when upstream electrode is anode). It has been predicted that the presence of copper vapour reduces the interruption capability of the breaker.

고인습성 약물인 피리도스티그민의 마이크로캅셀화에 의한 분체 특성의 개선 (Improved Micrometric Properties of Pyridostigmine Bromide, a Highly Hygroscopic Drug, through Microenccapsulation)

  • 김대석;김인화;정석재;심창구
    • Journal of Pharmaceutical Investigation
    • /
    • 제32권1호
    • /
    • pp.41-45
    • /
    • 2002
  • The purpose of this study is to microencapsulate a highly hygroscopic drug, pyridostigmine bromide (PB), with a waterproof wall material, in order to increase the flowability of the drug particles. Polyvinylacetaldiethylaminoacetate (AEA), Eugragit E and Eugragit RS were examined as the wall materials. Microcapsules containing PB were prepared by the evaporation technique in an acetone/liquid paraffin system using aluminum tristearate as a core material, and evaluated for drug encapsulation efficiency, surface morphology, particle size and drug dissolution. The encapsulation of PB in the wall material was almost complete. Among the wall materials examined, AEA exhibited the most excellency in shape, surface texture, flowability, size distribution of microcapsules. Above results suggest that AEA would be a potential wall material for microcapsulation of highly hygroscopic drugs, such as PB. Through microencapsulation with AEA, inconvenience of handling of PB powders encountered in the process of weighing and packing the powders to tableting die or capsule body could be greatly improved.

정적연소실내의 디젤분무증발과 연소특성에 관한 연구 (A Study on the Diesel Spray Evaporation and Combustion Characteristics in Constant Volume Chamber)

  • 김상호;김석준;이만복;김응서
    • 한국자동차공학회논문집
    • /
    • 제2권6호
    • /
    • pp.102-109
    • /
    • 1994
  • As a fundamental study to apply high pressure injection system to direct injection diesel engine, fuel injection system and constant volume combustion chamber were made and the behaviors of evaporating spray with the variation of injection pressure and the ambient gas temperature were observed by using high speed camera, and the combusion characteristics with the variation of injection pressure and A/F ratio were analyzed. As injection pressure increases, spray tip penetration and spray angle increase and, as a results spray volume increases. This helps an uniform mixing of fuel and air. Spray liquid core length decreases as ambient gas temperature increases, while it decreases as injection pressure increases but the effect of ambient gas temperature is dorminant. As injection pressure increases, ignition delay is shortened and combustion rate being raised, maximum heat release rate increases. It become clear that High injection pressure has high level of potential to improve the performance of DI-diesel engine.

  • PDF

공액성 소중합체를 이용한 유기 박막 트랜지스터 제작 및 특성에 관한 연구 (A Fabrication and Characterization of Organic Thin Film Transistor Using Conjugated Oligomers)

  • 김옥병;김덕영;김영관;손병청;김정수
    • 한국응용과학기술학회지
    • /
    • 제16권4호
    • /
    • pp.313-316
    • /
    • 1999
  • Organic semiconductors based on conjugated thiophene oligomer have great potential to be utilized as an active layer for electronic and optoelectronic devices. In this study, a conjugated oligomer such as ${\alpha}$-sexithiophene (${\alpha}$-6T) thin films was prepared by the Organic Molecular Beam Deposition (OMBD), and various electrode materials were also deposited by a simple vacuum evaporation, respectively. Those films were photolithographically patterned for the electrical measurements. Electrical charact-erization of the thin film transistor with various channel length were executed and the field effect mobility of these thin film transistors were also calculated by the formula using the experimental data.

배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능- (Drainage Performance of Various Subsurface Drain Materials-)

  • 김철회;이근후;유시조;서원명
    • 한국농공학회지
    • /
    • 제21권3호
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

식품포장의 항산화제 첨가 플라스틱의 용도 (The Applications of Antioxidant Impregnated Polymers to Food Packaging)

  • 이윤석
    • 한국포장학회지
    • /
    • 제8권2호
    • /
    • pp.49-59
    • /
    • 2002
  • 플라스틱 포장재의 주요 기능은 식품을 수송, 보관과정에서 안전하게 보존하는 것이다. 식품과 플라스틱 포장재간의 반응은 식품의 품질과 안전성 문제에 있어서 상당한 이슈가 되고 있는데 이는 주로 플라스틱에 남아있는 잔류용제, 단량체, 첨가물 등이 식품으로 전이되는 문제들이다. 플라스틱 포장재에 항산화제를 첨가하는 것은 필름의 열화는 물론 포장된 식품, 특히 유지가 많은 제품의 산화를 막을 수 있다. 현재 BHT와 같은 항산화제를 플라스틱 포장재에 적용하는 것이 상업화되어 제품의 유통기간을 연장시키는 방법으로 사용되고 있다. Alpha tocopherol은 가장 중요한 자유기 제거제의 하나로 생물 시스템에는 잘 알려져 있는데 이것을 포장재에 사용함으로써 생산자와 소비자 모두 매우 긍정적인 반응을 보이고 있다. Alpha tocopherol은 폴리올레핀계 레진에 적용되어 BHT를 대체하고 있다. 이 연구는 포장재와 제품간의 증발-흡착 메카니즘을 이용한 항산화제의 효과와 그 적용, 그리고 이러한 메카니즘을 예측할 수 있는 분석기법을 설명하였다.

  • PDF

대두포장(大豆圃場)에서 수분흡수(水分吸收)에 관(關)한 수치해석학적(數値解析學的) 모형(模型) (Numerical Simulation of Water Uptake of Soybean Field)

  • 정영상
    • 한국토양비료학회지
    • /
    • 제14권1호
    • /
    • pp.8-16
    • /
    • 1981
  • Ohm의 법측(法測)을 이용(利用)한 물 이동(移動) 방정식(方程式)의 해(解)를 수치해석법(數値解析法)으로 구(求)하여 대두(大豆)의 물 소모양상(消耗樣相)을 추정(推定)하여 실측자료(實測資料)와 비교(比較)하였다. 본(本) 모형(模型)은 고속전산기(高速電算器)를 사용(使用)하기 위(爲)하여 FOPTRAN으로 쓰여졌으며 모형(模型)의 검정(檢定)은 미(美) Iowa 주서부농업시험장(洲西部農業試驗場)에서 얻어진 자료(資料)를 사용(使用)하여 시도(試圖)되었다. 모형검정치(模型檢定値)와 실측치간(實測値間)에 잘 맞는 경향(傾向)이었으나 다소(多少)의 오차(誤差)가 시기적(時期的)으로 인정(認定)되었다. 계산(計算)된 토양증발량(土壤蒸發量)은 작물생육초기(作物生育初期)에는 약(約) 2mm/day이었으나 후기(後期)에는 0.4mm/day로 감소(減少)하였으며, 한발기(旱魃期)에 0.1mm/day까지 감소(減少)되었다. 증발량(蒸發量)은 최대(最大) 5mm/day이었다. 토심(土深) 180cm와 210cm 층위(層位)에서 이루어지는 지하배수량(地下排水量)은 약(約) 0.2mm/day이었고, 후기(後期)에는 역전되어 모관상승(毛管上昇)을 보였으며 이 양(量)은 약 0.07mm/day로 근계(根系)의 물 소모량(消耗量)을 충족(充足)시키지는 못하였다. 따라서 심토(深土)의 물 이용(利用)을 위(爲)해서는 근계(根系)의 확장(擴張)이 더 중요(重要)하다.

  • PDF

유연 전자소자용 금속 전극 제조를 위한 Ag Nanowire 용액의 Brush 코팅 및 플라즈마 공정을 이용한 어닐링 (Effects of Brush Coating of Ag Nanowire Solution and Annealing using Plasma Process for Flexible Electronic Devices)

  • 김경보
    • 산업융합연구
    • /
    • 제21권3호
    • /
    • pp.189-194
    • /
    • 2023
  • 최근에 유연 전자소자에 대한 다양한 연구가 이루어지고 있다. 본 연구에서 유연 전자소자용 금속기반의 투명 전도막으로 Ag 나노와이어로 그 가능성을 평가하였다. 이를 위해 신개념의 브러시 코팅법과 상압플라즈마 기반의 아르곤 플라즈마 증발법으로 Ag 나노 물질을 글라스에 형성시켰다. 먼저 브러시로 Ag 용액을 글라스에 코팅하고, 남아있는 용매는 상압플라즈마로 제거한다. 이 용매 증발 과정에서 상압플라즈마와 용매의 반응에 의해 소리가 발생하기 때문에 용매의 남아있는 정도를 확인할 수 있다. 막의 코팅 횟수에 따른 반사도, 투과도, 흡수도와 같은 광특성 및 전기적인 결과들을 관찰하기 위하여 최대 5번 코팅하여 그 결과들을 분석하였다. 광에 의한 Ag 나노와이어와의 상호작용을 조사할 목적으로 빛의 파장을 200nm부터 800nm까지 변화시키면서 반사도 및 투과도를 측정하였으며, 반사도와 투과도 모두 5번 코팅한 샘플에서 가장 큰 변화를 나타내었다. 특히 흡수도의 경우 반사도나 투과도의 데이터와는 다르게 코팅에 따라 Ag 나노와이어의 빛에 대한 흡수도 증가 추이를 명확하게 확인할 수 있었다. 전기적인 특성은 4번 이상 코팅했을 때부터 큰 변화가 있었으며, 특히 5번 진행시 kΩ/cm2보다 낮아진 저항값을 보였다. 이러한 광 및 전기적인 결과들을 기반으로, 향후 전자소자에 적용하여 투명 전도막으로의 가능성을 검증할 계획이다.

대학 캠퍼스 유역의 물순환 특성 변화에 관한 연구: 관악산 유역 잠재증발산량 개선을 중심으로 (A study on changes in water cycle characteristics of university campus catchment: focusing on potential evapotranspiration improvement in Mt. Gwanak catchment)

  • 김현주;김영오
    • 한국수자원학회논문집
    • /
    • 제55권12호
    • /
    • pp.1077-1089
    • /
    • 2022
  • 도림천의 최상류인 관악산에 서울대학교가 건설되면서 관악산 유역은 일종의 도시화를 겪어왔으며, 폭우 시 하류 하천의 수량과 수질에 악영향을 미치는 사례 등 물순환 왜곡이 우려되어왔다. 대부분의 캠퍼스 유역이 그렇듯 물순환과 관련된 자료가 절대적으로 미흡하였기에 복합기상관측장비 Atmos-41을 도입함으로써 수문·기상학적 자료를 구축하여 본 연구를 시작하였다. Atmos-41의 관측 결과는 기상청 자료와 비교하여 통계적 특성과 월별 변동성에 따른 신뢰구간을 분석하여 검증하였다. 관악캠퍼스의 물순환은 SWMM으로 평가하였는데 표면유출량과 침투량 모의값은 동일 유역의 과거 연구 결과를 통해 검증하였고, 잠재증발산량은 Atmos-41의 관측 자료와 비교하여 검증하였다. 계산된 SWMM 잠재증발산량은 기온이 낮은 기간에 대해서는 과소 추정되는 경향이 있어, 다중회귀분석을 통해 강수량, 상대습도, 풍속에 대한 변동을 고려할 수 있도록 보정하였다. 그 결과 Atmos-41의 잠재증발산량과 비교했을 때 R2가 0.54에서 0.80으로 개선되었다. 관악산 유역의 캠퍼스화로 인한 물순환 변화율은 표면유출률의 15.7% 증가, 침투율의 14.2% 감소, 그리고 증발량의 1.6% 감소를 초래한 것으로 확인하였다. 결론적으로 서울대학교가 지속가능한 캠퍼스로 나아가고 하류 유역의 안전성 확보를 위해 현재의 물순환 변화율을 유지할 것을 제안하며, Atmos-41의 지속적인 관측 결과는 추후 관악캠퍼스 물순환 연구의 기초 자료로 활용성이 높을 것이라 기대된다.