• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.98-102
• /
• 2010

목련잎 추출액을 이용하여 Au core-Ag shell 합금 나노입자를 합성하였다. 환원제인 식물잎 추출액을 먼저 $HAuCl_4$ 용액과 반응시키고 다음에 $AgNO_3$ 용액과 반응시켜 금 seed와 은 shell을 형성시켰다. 반응시간에 따른 UV-visible spectroscopy의 변화를 모니터링하여 합금 나노입자의 형성을 관찰하였다. 합성된 합금 나노입자를 transmission electron microscopy(TEM), energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS) 등으로 특성화 하였다. TEM image로부터 관찰된 합금 나노입자는 삼각형, 오각형, 육각형 등의 평판과 구 구조의 혼합물이었다. EDS와 XPS 분석으로부터 결정된 금/은 합금 나노입자의 원자 은 함량은 각각 34와 65 wt%로 Au core-Ag shell 나노구조가 형성되었음을 알 수 있었다. 이러한 core-shell 형태의 나노구조는 표면 강화 라만 분광 및 생물분자의 고감도 검출 등에 잠재적인 응용이 기대된다.

• Nuclear Engineering and Technology
• /
• 제45권6호
• /
• pp.721-730
• /
• 2013

Within the framework of the ASTRID project, core design studies are being conducted by the CEA with support from AREVA and EDF. The pre-conceptual design studies are being conducted in accordance with the GEN IV reactor objectives, particularly in terms of improving safety. This involves limiting the consequences of 1) a hypothetical control rod withdrawal accident (by minimizing the core reactivity loss during the irradiation cycle), and 2) an hypothetical loss-of-flow accident (by reducing the sodium void worth). Two types of cores are being studied for the ASTRID project. The first is based on a 'large pin/small spacing wire' concept derived from the SFR V2b, while the other is based on an innovative CFV design. A distinctive feature of the CFV core is its negative sodium void worth. In 2011, the evaluation of a preliminary version (v1) of this CFV core for ASTRID underlined its potential capacity to improve the prevention of severe accidents. An improved version of the ASTRID CFV core (v2) was proposed in 2012 to comply with all the control rod withdrawal criteria, while increasing safety margins for all unprotected-loss-of-flow (ULOF) transients and improving the general design. This paper describes the CFV v2 design options and reports on the progress of the studies at the end of pre-conceptual design phase 1 concerning: - Core performance, - Intrinsic behavior during unprotected transients, - Simulation of severe accident scenarios, - Qualification requirements. The paper also specifies the open options for the materials, sub-assemblies, absorbers, and core monitoring that will continue to be studied during the conceptual design phase.

• 한국건축시공학회지
• /
• 제24권4호
• /
• pp.437-445
• /
• 2024

본 연구는 창호에 사용되고 있는 Azon과 Azo-Core를 셔터에 활용하여 단열성능을 확보하고자 Therm 7.4 프로그램과 기밀, 단열성 시험을 통해 검토하였다. 시뮬레이션 결과 Azon 및 Azo-Core는 기존의 단열재에 비해 단열성이 우수했으며 셔터에 적용 시 1등급의 기밀성능과 평균2.018W/m²·k의 열관류율을 확인하였다. 이는 외부셔터 설치 기준 중부지방 1.5W/m²·k, 남부지방 1.8W/m²·k보다 높은 수치이지만 제주지방 2.2W/m²·k에는 적용 가능한 수치이며 Azon과 병행 적용이 아닌 Azo-Core만 적용할 수 있는 추가 연구가 검토된다면 셔터 단열재로 사용 가능성이 있다.

• Advances in Traditional Medicine
• /
• 제10권4호
• /
• pp.263-270
• /
• 2010

Scoparia dulcis L. is widely used in the traditional system of medicine for treating liver ailments. In the present study the terpenoids and terpenoid fractions isolated from 1:1:1 petroleum ether, diethyl ether and methanol (PDM) extract of Scoparia dulcis L. were tested for their in vitro 1, 1-Diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity. Selected samples from the assay were further tested for their in vitro hepatoprotective activity against $CCl_4$ induced hepatotoxicity in freshly isolated rat hepatocytes. In the in vitro antioxidant study, fractions 7, 11, 13, 14, and 15 and PDM extract show the DPPH radical scavenging activity. The phytochemical screening of all these fractions show the presence of terpenoids. In the in vitro hepatoprotective study all these fractions and the PDM extract significantly prevent the $CCl_4$ induced changes in the aspartate aspartate amino transferase, alanine amino transferase and alkaline phosphatase levels (p < 0.05). The above results are comparable with the standard, silymarin. The results of the study indicate that, the PDM extract of Scoparia dulcis L. possesses potential hepatoprotective activity and this may be attributed to its free radical scavenging potential, which in turn may be attributed to the presence of terpenoids.

• Journal of Ginseng Research
• /
• 제43권3호
• /
• pp.421-430
• /
• 2019

Background: The ginsenoside Rg3, one of active components of red ginseng, has chemopreventive and anticancer potential. Cancer stem cells retain self-renewal properties which account for cancer recurrence and resistance to anticancer therapy. In our present study, we investigated whether the standardized Korean Red Ginseng extract (RGE) and Rg3 could modulate the manifestation of breast cancer stem cell-like features through regulation of self-renewal activity. Methods: The effects of RGE and Rg3 on the proportion of $CD44^{high}/CD24^{low}$ cells, as representative characteristics of stem-like breast cancer cells, were determined by flow cytometry. The mammosphere formation assay was performed to assess self-renewal capacities of breast cancer cells. Aldehyde dehydrogenase activity of MCF-7 mammospheres was measured by the ALDEFLUOR assay. The expression levels of Sox-2, Bmi-1, and P-Akt and the nuclear localization of hypoxia inducible $factor-1{\alpha}$ in MCF-7 mammospheres were verified by immunoblot analysis. Results: Both RGE and Rg3 decreased the viability of breast cancer cells and significantly reduced the populations of $CD44^{high}/CD24^{low}$ in MDA-MB-231 cells. RGE and Rg3 treatment attenuated the expression of Sox-2 and Bmi-1 by inhibiting the nuclear localization of hypoxia inducible $factor-1{\alpha}$ in MCF-7 mammospheres. Suppression of the manifestation of breast cancer stem cell-like properties by Rg3 was mediated through the blockade of Akt-mediated self-renewal signaling. Conclusion: This study suggests that Rg3 has a therapeutic potential targeting breast cancer stem cells.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.15-34
• /
• 2012

In the present paper, an improved high-order theory is used for bending analysis of soft-core sandwich plates. Third-order plate assumptions are used for face sheets and quadratic and cubic functions are assumed for transverse and in-plane displacements of the orthotropic soft core. Continuity conditions for transverse shear stresses at the interfaces as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the plate are satisfied. Also, transverse flexibility and transverse normal strain and stress of the orthotropic core are considered. The equations of motion and boundary conditions are derived by principle of minimum potential energy. Analytical solution for bending analysis of simply supported sandwich plates under various transverse loads are presented using Navier's solution. Comparison of the present results with those of the three-dimensional theory of elasticity and some plate theories in the literature confirms the accuracy of the proposed theory.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.249-256
• /
• 2001

Optical Color Corescanner firstly developed by DMT-GeoTec, Germany and further upgraded through the Korea-Germany joint project is capable of duplicating the core surfaces. The tool uses a digital CCD line camera. As the core is rotated by an electric motor, the camera scans the uppermost line, everytime with a circumferential increment of up to 0.05mm(20pixels/mm) and hence a complete 360$^{\circ}$ unwrapped image(core image) is produced. This paper illustrated diverse research benefits of such core images from several test sites in our country. All scanned images could be stored as a data-base one and easily used with software facilities \circled1 to evaluate a percental distribution of mineral components or grain size etc. not only for the rock classification but also for e.g. the assessment of building stones, \circled2 to study potential reservoirs as a hydrocarbon indicator using ultraviolet fluorescence reflection from cores, \circled3 to facilitate the qualitative and quantitative analysis of fractures, \circled4 to evaluate the fractures and thin bedded reservoirs using spectral color responses. Based on abundant scanning experiments, it would seem that this imaging work should lead to reflecting the future trend in underground survey toward a more comprehensive understanding of the properties and behaviors of in situ rocks.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.623-631
• /
• 2011

Metallic sandwich panels based on a truss core structure have been developed for a wide range of potential applications with their lightweight and multi-functionality. Structural performance of sandwich panels can be predicted from the studies on mechanical behavior of a unit cell of truss core structures. Analytical investigations on the unit cell provide approximated guidelines for the design of overall core structures for a specific application in short time. In this study, the effects of geometrical parameters on mechanical behavior of a pyramidal shape of unit cell were investigated with analytical models. The unit cell with truss member angle of 45 degree was considered as reference model and other models were designed to have the same weight and projected area but different truss member angle. All truss members were assumed to be connected with pin joint in analytical models. Under the assumptions, the equivalent strength and stiffness of the unit cell under compressive and shear loads were predicted and compared. And finally, the optimum core member angle to have maximum mechanical property could be calculated and verified with FE analysis results.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.82-90
• /
• 2004

등방성의 2차원 단위 셀 형상을 지닌 세 종류의 심재-삼각형 심재, 육각형 심재와 starcell 심재-에 대하여 샌드위치 구조물 내에서의 응용과 관련된 기계적 특성을 연구하였다. 세 종류의 심재에 대하여 축 방향 Young 계수, 전단 계수를 계산하여 비교하고, 심재의 셀 벽을 압축 하중과 전단 하중을 받고 있는 판재로 가정하여 축 방향 압축 좌굴 강도와 전단 좌굴 강도를 산출하였다. 심재의 유연성을 나타내는 평면탄성계수를 비교하고 쌍축 굴곡 실험 (biaxial flexural test)을 실시하여 유연성을 측정하였다. 세 가지 심재 모두 축 방향으로 같은 강성을 가지고 있었으나, 삼각형 심재는 다른 두 종류의 심재에 비하여 낮은 강도를 나타내었고, starcell 심재는 다른 심재들에 비해 월등히 높은 유연성 을 나타내었다. 이러한 유연성은 starcell 심재가 곡면에 적용되는 샌드위치 구조물의 심재로서 응용될 수 있음을 보여주었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.195-200
• /
• 1995

This paper presents the practical use of high strength concrete on 28-story Samsung Shin-dacbang Housing-Commercial Combined Building with 8-story basements located in Seoul. 700 Kg/$\textrm{cm}^2$ compressive Strength concrete was placed for basement core-walls and 500 kg/$\textrm{cm}^2$ concrete was used for structural frames up to 10th floor. The thermal sensors were installed prior to concrete casting into the core walls to measure the heat of hydration during hardening process. The correlation of core strength to the standard cylinder test strength was also discussed. The successful utilization of 500 and 700 kg/$\textrm{cm}^2$ concrete shows that the practical application of high strength concrete has a great potential to the high-rise R.C building construction.