• Safety and Health at Work
• /
• 제12권2호
• /
• pp.209-216
• /
• 2021

Background: The article presents the results of studies performed in order to develop a new method of airborne potassium bromate(V) determination at workplaces. Methods: The method is based on a collection of the inhalable fraction of potassium bromate(V) using the IOM Sampler, then extraction of bromates with deionized water and chromatographic analysis of the obtained solution. The analysis was performed using ion chromatography with conductometric detection. The tests were performed on a Dionex IonPac®AS22 analytic column (250 × 4 mm, 6 ㎛) with AG22 precolumn (50 × 4 mm 11 ㎛). Results: The method provides for potassium bromate(V) determination within the concentration range of 0.043 ÷ 0.88 mg/m³ for an air sample of 0.72 m³ in volume, i.e., 0.1-2 times the exposure limit value as proposed in Poland. The method was validated in accordance with PN-EN 482. The obtained validation data are as follows: measuring range: 3.1-63.4 ㎍/mL, limit of detection (LOD) = 0.018 ㎍/mL and limit of quantification (LOQ) = 0.053 ㎍/mL. The developed method has been tested in the work environment, on laboratory employees having contact with potassium bromate(V). Conclusion: The analytical method allowed the determination of the inhalable fraction of airborne potassium bromate(V) at workplaces and can be used to assess occupational exposure.

• 대한임상독성학회지
• /
• 제3권2호
• /
• pp.119-121
• /
• 2005

Sodium bromate or potassium bromate has been used as hair cold neutralizer. Sodium bromate intoxications occurred in children incidentally early days of marketing, but recently in adult suicidally. This chemical intoxication result in renal failure, ototoxicity, neurotoxicity, hemolytic anemia and so on. We experienced a 39-year-old woman of hairdresser with non-oliguric acute renal failure after ingestion hair neutralizer 500 ml. She received hemodialysis 3 times and discharged without complication on 8th admission days.

• 분석과학
• /
• 제23권2호
• /
• pp.155-160
• /
• 2010

먹는 물 중 bromate의 국내 외 시험방법에 대한 분석 조건을 비교하여 최적 시험조건을 확인하고 ion chromatograph-suppressed conductivity detector (IC-CD)를 사용하여 먹는 샘물 중 bromate 함량을 분석하였다. 시료 전처리를 위해 먹는 샘물 20 mL를 온가드 Ba-, Ag-, H-카트리지 순서대로 통과시키고 마지막에 $0.2\;{\mu}m$ 맴브레인 필터로 여과 하였다. 여과한 시료는 IC-CD에 주입하였으며, 시료 중 bromate는 10~50 mM의 KOH 이동상 및 수산화이온용액 이동상에 적합한 가드 및 분석용 컬럼인 AG 19 및 AS 19에 의해 분리하였다. Bromate의 검정 곡선은 $0.5\sim40\;{\mu}g/L$의 농도 범위에서 $r^2$값이 0.9998로 좋은 직선성을 보였으며, 방법검출한계(MDL) 및 정량한계(LOQ)는 각각 0.1, $0.5\;{\mu}g/L$이었다. 2009년 9월 이후 유통 중인 먹는 샘물 157 개 시료를 분석한 결과, 33 개 시료에서 bromate가 검출되었으며, 검출된 시료의 평균농도는 $2.4\;{\mu}g/L$ 이었다. 측정 농도 범위는 $0.5\sim6.5\;{\mu}g/L$로 모두 국내 먹는샘물 수질기준인 $10\;{\mu}g/L$ 이내였다.

• 한국식품조리과학회지
• /
• 제13권4호
• /
• pp.492-499
• /
• 1997

밀가루(80%)와 자색고구마가루(20%)를 이용한 복합분으로 고구마빵을 제조하기 위하여 L-ascorbic acid, potassium bromate, gluten, carboxy methyl cellulose 및 hydroxy propyl methyl cellulose 등의 물성개량제를 첨가하여 고구마빵의 제빵성을 비교.검토하였다. Alveograph에 의한 반죽특성은 물성개량제를 첨가함에 따라 P, L, W값이 증가하였으며, 특히 L-ascorbic acid, gluten, carboxy methyl cellulose 등의 영향이 컸다. 반죽의 표면구조는 산화제를 첨가한 경우 gluten의 얇은 막이 거의 관찰되지 않았고, gluten, carboxy methyl cellulose, hydroxy propyl methyl cellulose를 참가한 경우 전분입자의 형태는 비교적 선명하나 큰 전분입자를 중심으로 얇은 막으로 둘러싸여 있었다. 빵 내부색의 총체적인 차이를 구별할 수 있는 ΔE값은 첨가제에 의한 영향은 없었으며, 빵 내부의 물성은 최대하중치, 강도, 경도 특성치가 사용첨가제에 의해 감소하였으며, 탄성, 응집성의 특성치는 증가하였다. 빵 내부의 노화특성은 7일 냉장저장 결과 엔탈피($\Delta$H)값이 증가하였으나 각 첨가제 모두 노화지연 효과가 있었다. 빵의 부피도 첨가제를 사용함으로써 증가하였으며 특히 L-ascorbic acid, L-cystine, carboxy methyl cellulose 및 hydroxy propyl methyl cellulose 등의 효과가 좋았고, 관능검사결과 potassium bromate를 제외하고 전반적으로 제빵의 품질이 양호하였다.

• 한국식품영양학회지
• /
• 제16권2호
• /
• pp.130-137
• /
• 2003

The squid had not been utilized for gel products because of its lower gel forming ability. The objectives of this study were as followed; 1) the optimum heating condition on squid meat paste products and 2) the optimum added level for jelly strength of squid meat paste products. Optimum heating conditions of squid meat kamaboko were as followed; setting(pre-heating) at 15$^{\circ}C$ or 55$^{\circ}C$ for 2 hours and heating at 9$0^{\circ}C$ for 60 minutes. The additives examined were as follows; 20mM EDTA, 10mM PMSF, 5 $\mu$mol/100g TGase, 0.2% potassium bromate, 2% collagen, 2% sucrose ester of stearic acid and 1% egg shell powder. The effects of additives on jelly strength were observed as follow, in descending order; 10mM of PMSF>5 $\mu$mo1/100g of TGase>0.2% of potassium bromate>20mM of EDTA. But sucrose ester of stearic acid and 1% egg shell powder were no effect. The solvents examined were as follows; n-amyl alcohol, n-butyl alcohol, n-hexyl alcohol, ethyl alcohol, ethylene glycol, propylene glycol and glycerin glycol. It showed that high jelly strength as 787gㆍcm for 3% of n-butyl alcohol and 749gㆍcm for 3% of n-amyl alcohol. To adding 5% of n-butyl alcohol and n-amyl alcohol, gave the highest jelly strength and water holding capacity(WHC). Effect of alcohol on jelly strength appeared higher value at added 5% of n-butyl alcohol than n-amyl alcohol, and flying squid product was higher than jumbo squid product.

• 대한의생명과학회지
• /
• 제7권4호
• /
• pp.211-216
• /
• 2001

This studs was carried out to evaluate KBrO$_3$-induced acute toxicity by clinical pathological parameters in rats. Fourty rats were divided into 4 groups including normal group and three KBrO$_3$-treated groups with doses of 200, 300, and 400 mg/kg, p. o., respectively. Creatinine and BUN were increased remarkably by KBrO$_3$ at 400 mg/kg, respectively (p<0.05, p<0.01). Phosphorus content increased two times the control at 400 mg/kg (p<0.05). Osmolarity was increased, whereas $CO_2$ content showed decrease at 400 mg/kg, respectively (p<0.01, p<0.05). Histopathological findings also showed dose-dependent renal failure. On the other hand, AST was increased three times the control at 400 mg/kg (p<0.01). WBC was increased by KBrO$_3$ depending on the dosage. Platelet was decreased at 200 mg/kg, whereas it was increased at 400 mg/kg (p<0.05). The results above suggest that clinical pathological parameters could be used as indices for the evaluation of KBrO$_3$-induced acute toxic reponse occuring in not only kidney but other organs including liver, when the dosage is as high as 400 mg/kg.

• Environmental Engineering Research
• /
• 제11권5호
• /
• pp.266-276
• /
• 2006

Commonly, the flocculant is dissolved in process or recycle water in industrial plant which has many ionic materials. Therefore, the polymer degradation in aqueous solution by chemical, mechanical or bacteriological may occur, sometimes rapidly. Even if the same flocculant is dissolved, the flocculation characteristics and the properties of dissolving polymer varied with the kind of dissolving water. In this study, we try to estimate the interaction between flocculants and ionic materials in dissolving water using self inversing emulsion polymer; polyacrylamide-co-trimethyl ammonium ethyl acrylate chloride flocculants which have varying molecular weights and structures at a several conditions. The polymeric flocculant is dissolved in artificial dissolving water with Potassium Chloride (PC), Calcium Chloride anhydrous (CC), Potassium Hydroxide (PH), Sodium Chloride (SC), Sodium Bromate (SB) and Iron (II) Sulfate Heptahydrate (IS) as ionic sources. Experimental results indicate that the cationic and anionic ions in dissolving water induce the hydrolysis, degradation of cationic functional group and uncoiling of polymeric flocculants, therefore, the flocculation efficiency decreased by undesired polymer. According that result, it is important to estimate not only its structures and physical properties but also the qualities of dissolving water to optimize the efficiency.

• 한국환경과학회지
• /
• 제15권12호
• /
• pp.1155-1161
• /
• 2006

The characteristics of photocatalytic degradation of tar colorants such as brilliant blue FCF(BBF) and tartrazine(TTZ) with zinc oxide suspension was studied in a batch reactor under irradiation of ultra-violet ray. Photocatalytic degradation of TTZ with ZnO was more higher than that of BBF, and was Increased with dosage of ZnO below 5g, but was nearly affected with initial pH of two tar colorants aqueous solution. Ammonium persulfate was more effective oxidant than potassium bromate which slightly increased the degradation of BBF, but not increased the degradation of TTZ. The photocatalytic degradation rates of BBF and TTZ were pseudo-first order with rate constants of 0.0066, 0.0092 and $0.015min^{-1}$ for BBF, 0.042, 0.017 and $0.110min^{-1}$ for TTZ at the dosage of 1, 2 and 5g ZnO, respectively.

• 한국환경과학회지
• /
• 제13권6호
• /
• pp.599-603
• /
• 2004

In a batch reactor, the characteristics of photocatalytic degradation of brilliant blue FCF in titanium dioxide suspension was studied under the irradiation of ultra-violet ray. Photocatalytic degradation in anatase type of TiO$_2$ was more effective than in rutile type of $TiO_2$ below the dosage of 5g. The degradation rate was slightly increased with decreasing initial pH of brilliant blue FCF aqueous solution, but rapidly increased with the addition of oxidant. Potassium bromate acted as more effective oxidant than ammonium persulfate. The photocatalytic degradation rate of brilliant blue FCF was pseudo-first order with rate constants of 0.012, 0.006 and $0.003min^{-1}$ at initial pH 3.1, 5.2 and 7.1 of brilliant blue FCF solution, respectively.

• 대한금속재료학회지
• /
• 제47권2호
• /
• pp.91-98
• /
• 2009

The titania nanotubular layer for photocatalytic application was synthesized by anodization process in HF solution and the photocatalytic efficiencies of nanotubular film were evaluated by the decomposition rate of aniline blue. In order to facilitate the photocatalytic reaction, the electron acceptors such as potassium bromate, hydrogen peroxide and ammonium persulfate were added to aniline blue solution and the effects of electron acceptors on the dye degradation efficiency were evaluated. The results showed that the photocatalytic efficiency has markedly improved by adding the electron acceptors.