• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.310-322
• /
• 2016

Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.153-160
• /
• 2020

Gradual tooth wear is a natural process of aging, but pathological wear over physiologic ranges leads to functional and esthetic problems. The loss of posterior support may cause pathological wear of anterior teeth, which results in reduction of vertical dimension and disharmony of occlusal plane. To solve this problem, determination of proper vertical dimension considering centric relation is necessary. This case report presented 71-year-old male, who had the severe wear of lower anterior teeth due to loss of posterior support. By meticulous evaluation, a full mouth rehabilitation with elevation of vertical dimension was planned. After 8 months of follow-up, stable occlusal scheme is maintained and patient was satisfied with clinical outcome functionally and esthetically.

• The korean journal of orthodontics
• /
• v.50 no.4
• /
• pp.278-289
• /
• 2020

Orthodontic treatment of posterior bite collapse due to early loss of molars and the consequent drift of adjacent teeth is complicated. When the posterior bite collapse occurs in patients with facial asymmetry, both transverse and vertical compensation are necessary for camouflage orthodontic treatment. In such cases, posterior maxillary segmental osteotomy (PMSO) can be an effective alternative procedure that simplifies the orthodontic treatment and shows long-term stability through dental compensation within the alveolar bone housing. This case report aimed to describe the orthodontic treatment of maxillary occlusal plane canting caused by severely extruded maxillary teeth in a patient with skeletal facial asymmetry that was corrected with PMSO along with protraction of the lower second molar to replace the space of the extracted first molar. The treatment duration was 18 months, and stable results were obtained after 2 years of retention.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.88-94
• /
• 2019

PURPOSE. This study was conducted to investigate patterns of adjacent tooth displacement in the posterior implant with interproximal contact loss (ICL) by 3-D digital superimposition method. MATERIALS AND METHODS. Posterior partially edentulous patients, restored with implant fixed partial prostheses before 2011 and suffered from food impaction of ICL between 2009 and 2011, were included. Two dental casts, at the time of delivery and at the time of food impaction in a same patient, was converted into 3-D digital models through scanning and superimposition was performed to assess chronologic changes of the dentition. Directions of tooth displacement were evaluated and the amount of ICL was calculated. Correlations between the amount of ICL and elapsed time, or between the amount of ICL and age after function, were assessed at a significance level of P<.05. RESULTS. A total number of 13 patients (8 males, 5 females) with a mean age of $65.76{\pm}9.94years$ and 17 areas (4 maxillae, 13 mandibles) were included in this retrospective study. Teeth adjacent to the implant restoration showed complex displacements but characteristic tendency according to the location of the arch. The mean amount of ICL was $0.33{\pm}0.14mm$. Elapsed time from function to ICL was $61.47{\pm}31.27months$. There were no significant differences between the amount of ICL and elapsed time, or age (P>.05). CONCLUSION. Natural teeth showed various directional movements to result in occlusal change in the arch. The 3-D superimposition of chronologic digital models was a helpful method to analyze the changes of dentition and individual tooth displacement adjacent to implant restoration.

• Journal of Periodontal and Implant Science
• /
• v.33 no.3
• /
• pp.383-393
• /
• 2003

The aim of this retrospective study was to compare the amount of marginal bone loss between upper anterior area and upper posterior area with 71 upper single-tooth restorations on 2 stage machined $Br{{\aa}}nemark$ implants since Jan 1995. The second aim was to compare the bone defect group which had dehiscence and fenetration and the others in the upper anterior region. The results were as follows. 1. The most frequent reason of missing tooth in the upper anterior region was trauma by 61%. While upper posterior region showed various reasons such as congenital missing, advanced periodontitis, trauma. 2. Peri-implantitis with fistula occurred 1 of 41 implants in the upper anterior group in 1 year after loading and 2 of 32 implants in the upper posterior group failed before loading. The 1 year success rate of upper anterior group was 97.56 %, and 93.75 % for upper posterior group. 3. The mean marginal bone loss in the upper anterior group was 0.44${\pm}$0.25 mm, while 0.57${\pm}$0.32 mm in the upper posterior group. There was statistically significant difference in the amount of mean marginal bone loss (P${\pm}$0.10 mm at one year, and 0.48${\pm}$0.26 mm for the control group. No statistically significant difference of mean marginal bone loss was showen between bone defect group and the others at implantation. According to the results, the upper anterior region showed less marginal bone loss than the upper posterior region. In case of missing single upper tooth, careful consideration on recipient residual ridge to determine proper implant diameter and length, sufficient healing time, proper loading would lead to implant success. Single tooth implants in the maxilla seemed to be an alternative to fixed partial dentures without damage to adjacent teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.63-70
• /
• 2022

Teeth wear with loss of posterior support often leads to symptoms such as irregular occlusal plane and excessive wear of anterior teeth. In such environment, establishing proper posterior support and harmonious anterior guidance and occlusal plane is recommended. In this case, the patient had excessively worn dentition with loss of posterior support, while denying surgical treatment due to her(his) history of osteoporosis, ibandronate injection, and risk of medication-related osteonecrosis of the jaw (MRONJ). To recover the vertical space needed for prosthetic restoration, full mouth rehabilitation with vertical dimension increase of remaining teeth was decided. Missing teeth in the posterior area were restored with mandibular removable partial denture. The treatment plan was determined through careful diagnosis, and every step of procedures including tooth preparation, provisional phase with the increased vertical dimension, and definitive prosthetic phase were carried out accordingly. Once the treatment was completed, the patient was satisfied functionally and esthetically. Periodic examination of oral hygiene, occlusal stability was conducted.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.51-59
• /
• 2002

The aim of the present study was to investigate the distribution of periodontally hopeless teeth in patients who had not been treated. Five hundred nineteen teeth of 163 patients who had visited at the Department of Periodontology, Chonbuk National University Hospital during the period from January 1999 to July 2001 were selected as a periodontally hopeless tooth. Selection criteria were as follows: 1) probing pocket depth more than 8mm, 2) tooth mobility of degree III, 3) radiographic bone loss more than 75%. The contralateral tooth to a hopeless tooth (experimental tooth) was designated as a control tooth. Between the experimental and control tooth, differences in probing pocket depth, tooth mobility and amount of radiographic bone loss were examined as well as correlation. The results showed that hopeless teeth were most frequently found in the maxillary first molar position and least frequently in the maxillary canine position. Differences between experimental and control teeth were 2mm in probing depth, 1 degree in tooth mobility, and 20% in amount of bone loss (p<0.01). The periodontal conditions between the experimental and control teeth showed correlation in general, however, statistical significances were found in posterior teeth positions. Within limitations of this study, it can be concluded that local factors may play a role in deterioration of periodontal disease along with symmetrical character of periodontal disease.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.647-653
• /
• 2007

Rapid crestal bone resorption following maxillary tooth loss is further accentuated in the posterior regions because of pneumatization and enlargement of the maxillary sinuses. A treatment rationale that allows preservation and augmentation of vertical available bone at the time of posterior maxil-lary tooth extraction may offer numerous therapeutic benefits which are more short courses of ther-apy and no needs of additional surgical augmentation. The present study comprised 3 patients who had 4 posterior maxillary teeth with no evident bone between the tooth apex and sinus floor, as estimated through preoperative radiographic analysis. Sinus floor augmentation at the time of tooth extraction was chosen for the ltreatment of these patients. After the tooth was carefully extracted, the empty alveolus was thoroughly debrided and a trephine approach was performed. Particulated autogenous bone was gently pushed beyond the empty alveolus to elevate the sinus membrane using an osteotome. The distance between bone crest and si-nus floor was radiographically estimated 4 months after the first procedure. Another procedure was then carried out to place the implants of 11 mm length without another augmentation procedure. All implant were clinically stable, with no sign of infection. The presented surgical procedure performed at the time of extraction of posterior maxillary teeth in close proximity to the sinus floor allowed placement of implants of proper length.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.232-241
• /
• 2020

Purpose: This study investigated the complications and patterns of implants that confronted with the extruded natural teeth. Materials and Methods: Among patients who received implant treatment between 2006 and 2018 at Chosun University Dental Hospital, only implants that had a maintenance period of at least 5 years and that both implants and confronting natural teeth could be measured and compared on a radiograph were selected. They were divided into two groups. Group 1, experimental group consisted of Implants confronting the extruded natural posterior teeth (n = 167: maxilla (Group 1max) = 92, mandible (Group 1man) = 75) and Group 2, control group consisted of Implants confronting the normal natural posterior teeth (n = 656: maxilla (Group 2max) = 272, mandible (Group 2man) = 384). Results: The incidence of complications between Group 1 and Group 2 was statistically significant. In particular, there was a statistically significant difference between the frequency of marginal bone loss and the amount of marginal bone loss. Conclusion: The extruded natural tooth may cause more frequent complications including bone resorption in the opposing implant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.404-411
• /
• 2022

The patient in this case was an 80-year-old female who had lost #16, 13, 26, 37, 36, 35, 44, 45, 46, 47 teeth. The patient showed loss of posterior support, loss of vertical dimension of occlusion, and deep anterior overbite. Her chief complaint was esthetic and functional discomfort. She wanted to restore normal facial aesthetic shape and masticatory function through prosthetic treatment. Clinical evaluation, radiographic examinations, and facial and oral analysis were performed. Interocclusal rest space was excessive than the average. Distance between labial vestibules and zenith of central incisors, and lower facial ratio were below the average. Taken together, occlusal rehabilitation was determined through increasing 4 mm of vertical dimension on premolars. In this case, a patient who lacked restoration space with deep bite in the anterior region due to loss of the posterior teeth support restored a stable occlusal relationship and harmonious anterior and lateral guidance through fixed and removable prosthesis with increased vertical dimension.