• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.19-28
• /
• 2014

PURPOSES : This paper evaluates, using LS/DYNA-3D software, the vehicle impact performance of flexible barriers made of steel W-Beam supported by four different types of post configurations. These types include circular post, H-shape post, C-shape post, and square post. METHODS : The post-soil interaction has been investigated according to different impact angles. For this purpose, energy absorption, maximum displacements of post and rail, and occupant risk index of THIV have been compared each other. The three dimensional soil material model, instead of the conventional spring model based on Winkler and p-y curve, has been used to increase the correctness of computational model. RESULTS : It is noted the crash energy absorption has been increased with respect to the increase of impact angle. CONCLUSIONS : In particular, a post with open section(H-shape, C-shape) shows the greater crash energy absorption capability as compared with a post with closed section under the same level of impact conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.256-256
• /
• 2018

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.150-155
• /
• 2004

Universal design equations are presented for the H-plane T-junction power divider with a circular conducting post in a rectangular waveguide. For a given operating frequency and power split ratio, the post offset from the T-junction center line, the distance between the post and the waveguide wall, and the post diameter can be adjusted to obtain a minimum reflection at the input waveguide. Optimum values of the post offset are given in terms of the normalized frequency and the power split ratio. Corresponding values of the post diameter and the distance of the post from the waveguide wall are given in terms of the normalized frequency and the post offset.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.1
• /
• pp.135-153
• /
• 2005

With an explosive growth of internet and a change of consumer's demand, Post PC is emerging as a substitute for the existing desktop computer and laptop computer. Post PC is a new computer which is portable with wireless networking, cheaper than the existing PCs and specialized in the specific function that consumers want. Furthermore, the shape and the ability of Post PC are dependent on its specific function. The rudimentary Post PCs such as PDA, web-pad and smart-phone are already usable. And in the future, owing to the progress of technologies, the heterogeneity of relate companies and the low entry barrier, various Post PCs will be developed. In this paper, we analyze consumers' willingness-to-pay for Post PC with the attributes such as the portability, the speed of CPU, the data input method (using key board, or notepad etc), the size of monitor and price. To estimating consumers' willingness-to-pay for the attributes of Post PC, we apply a contingent ranking method, which makes the respondents rank hypothetical Post the portability, the speed of CPU, the data input method (using key board, or notepad etc),the size of monitor and price. To estimating consumers' willingness-to-pay for the attributes of Post PC, we apply a contingent ranking method, which makes the respondents rank hypothetical Post PC alternatives featuring various combinations of attributes, to a survey data collected in Korea. Using the estimated willingness-to-pay, we predict the shape and the ability of future's Post PC and draw policy implications for the national and company level R&D strategies.

• Korean Journal of Adult Nursing
• /
• v.12 no.1
• /
• pp.147-162
• /
• 2000

Predicting factors of post-stroke depression were investigated. The subjects were 254 stroke patients who had been discharged and visited regularly the outpatient clinic for follow up care. The influencing factors were classified into five categories : demographic, disease-related, current state, social support, and illness intrusiveness. Sex, age, job, and educational level were defined as the demographic factor. The disease-related factors included stroke type, illness duration, attack frequency, and NIH score. ADL, cognitive function, and social activity were considered as the current state factors. The social support was measured as the perceived amount of social support. Illness intrusiveness means the perceived illness induced life style disruptions. Demographic, disease-related, current state, and social support were hypothesized to directly and indirectly affect post-stroke depression through illness intrusiveness. The illness intrusiveness was hypothesized to directly affect post-stroke depression. The hierarchial multiple regression was used to identify significant factors. The result showed that this model explained 43.3% of variance of post-stroke depression. And the prevalence of post-stroke depression was 38.8%. Among the demographic factors, job was identified as a main contributor to indirectly increase the post-stroke depression. Among the disease-related factors, stroke type, attack frequency, and NIH score were found to indirectly affect the post-stroke depression. Among the current state factors, ADL and social activity indirectly affected the post-stroke depression through illness intrusiveness. Social support and illness intrusiveness were identified to directly affect the post-stroke depression. This study has proved the factors likely to be implicated in the development of post-stroke depression. Based upon these results, it is recommended that the nurses who take care of post-stroke patients consider the risk factors such as social support, illness intrusiveness et al. Also programs which decrease the illness intrusiveness and increase the social support to reduce post-stoke depression recommended to be developed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.177-197
• /
• 1995

The endodontically treated tooth is generally restored with post & core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the strees distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisou had severely damaged. After the root canal therapy it was post cored, and restored with PFM crown, for this experiment nine types of model were constructed : 1); long, 2); medium, 3); short gold post for the roots supported with a narmal alveolar bone, 4); long, 5); medium, 6); short gold post for the roots supported with an alveolar bone resorbed to its 1/3 of root length, 7); long, 8); medium, 9); short base metal post for the roots supported with an alveolar bone resorbed to its 1/3 of root length. Force was applied from two directions. One was functional maximum bite force(300N) applied to the spot just lingual to the incisal edge with the angle of 45 degrees to the long axis of the tooth, and the other one was horizontal force(300N) applied to the labial surface. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin of the root and the lingual portion of the apical dentin of the root. Stress in the post showed maximum value at 2 mm above the post apex. 2. In case of the long post and base metal post, strees was concentrated on the apex of the root and the post. 3. In case of the longer post, the displacement on the post-cement interface was lessened. The gold post was more displaceable than the base metal post. 4. In case of the alveolar bone resorption, stress concentrated on the root and the post and displacement on the post-cement interface were increased.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.674-696
• /
• 1997

There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous finite element study was restricted to normal bone model relatively close to cemen-toenamel junction. Moreover, the test of a model with diminished bone support was rare. The purpose of this study is to test the effects of alveolar bone loss on the magnitude, stress distribution and displacement of post reconstructed teeth. In this study, it was assumed that the coronal portion of upper incisor was severely destructed. After conventional endodontic treatment, it was restored with post and core. The PFM restoration was made on it. This crown was cemented with ZPC. Alveolar bone was classified by 4 types of bone, such as normal, 2 mm, 4 mm, 6 mm bone, according to the bone loss. Meanwhile, the material of post are divided into 2 types of materials, such as gold, co-cr. Force was applied to two directions. One was fuctional maximum bite force (300 N) applied to the spot just lingual to the incisal edge with the angle of 45 degree to the long axis of the tooth, and the other one was horizontal force (300 N) applied to the labial surface. The results analyzed with three dimensional finite element method were as follows : 1. Stress was concentrated on the adjacent dentin of the post apex, one third portion of the post apex and the labial & lingual mid-portion of the root in all case. The stress of middle third of the root was apparently concentrated on the labial aspect. 2. The stress on adjacent dentin of the post apex and one third of the post apex increased as alveolar bone height moved apically. This increase was dramatic beyond 4 mm bone loss model. 3. The stress of the post apex was spreaded to the middle third of the post and greater than gold post in the case of metal post. 4. The displacement of the neck of post was the greatest in one of the post-cement interface and this increased as alveolar bone height moved apically. Besides the displacement of the metal post is slightly lower than one of the gold post.

• The Korean Journal of Pain
• /
• v.32 no.1
• /
• pp.53-54
• /
• 2019

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.809-817
• /
• 2012

One of the OSI 7 Layer DDoS Attack, HTTP POST DDoS can deny legitimate service by web server resource depletion. This Attack can be executed with less network traffic and legitimate TCP connections. Therefore, It is difficult to distinguish DDoS traffic from legitimate users. In this paper, I propose an anomaly HTTP POST traffic detection algorithm and http each page Content-Length field size limit with defense method for HTTP POST DDoS attack. Proposed method showed the result of detection and countermeasure without false negative and positive to use the r-u-dead-yet of HTTP POST DDoS attack tool and the self-developed attack tool.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.629-637
• /
• 2023

This study aimed to evaluate the effect of post-curing equipment and time on the flexural strength of 3D printing resins produced by a liquid crystal display(LCD) printer. The three 3D printing resins(DENTCA Denture Teeth, DT; C&B 5.0 hybrid, CH; C&B Permanent A2, CP) were divided into four groups according to post-curing time(10 min and 30 min) and equipment with or without vacuum treatment. For the three-point flexural strength test and biaxial strength test were prepared by method according to ISO 10477, ISO 6872, respectively. Flexural strength was measured with universal testing machine. Comparison between post-curing time of each post-curing equipment was analyzed by independent sample t-test and Mann-Whitney U test(α=.05), and comparison between groups according to each 3D printing resin was performed by Kruskal-Wallis test and post-hoc by Bonferroni-Dunn test(α=.05). The flexural strength of the resin post-curing under vacuum was higher than that of the resin post-curing in air. In the comparison according to the post-curing time, in the case of the post-curing equipment without vacuum, the 30 minute curing time showed significantly higher flexural strength than the 10 minute curing time, except for the biaxial flexural strength of CH(P<.05). In the post-curing equipment with vacuum, the three-point flexural strength of all 3D printing resins(DT, CH, and CP) showed a higher value at 30 minute curing time than at 10 minute curing time.