• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.35-44
• /
• 2001

In the real environment, it is very limited for the trainees to participate the effective training using actual training equipments by themselves and also to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the trainees to get the effective training participating by themselves and to simulate all kind of possible situation without the exposure to the hazards of the actual system. In this paper, the new developed VE system for safety training is introduced. The system is more effective and economic one than the other system developed in Japan.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.21-28
• /
• 2000

In the real environment, it is not easy to get the effective training or to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the users to get the effective training or to simulate all kind of possible situations without the exposure to the harzards of the actual system. Therefore, the number of virtual reality(VR) application for safety will be increased dramatically in the future. This paper proposes a category of VR applications and also the steps to develope the VE for emergency management.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.376-386
• /
• 2020

Objectives: This study identifies the trend of possible occupational disease and probable occupational disease in lead or cadmium workers. It is also required to check the usefulness of follow-up management in lead or cadmium workers by reviewing the relevance between the results of follow-up management and the trend of possible occupational disease and probable occupational disease. Methods: From 2009 to 2018, the results of the Ministry of Employment and Labor's special health-screening program for hazard agents for workers were used. The correlation between the ratio of possible occupational disease and probable occupational disease of lead or cadmium workers and the ratio of those who observed were and underwent observed follow-up management was analyzed to confirm the usefulness of follow-up management. Results: Over the past decade, the average annual proportion of possible occupational disease and probable occupational disease among lead workers has been on the decline. Among cadmium workers, it has generally shown a trend of increasing and decreasing. After the implementation of follow-up management, possible occupational disease in lead workers showed significant relevance to work prohibitions and restrictions, and probable occupational disease in lead workers showed significant relevance to the work prohibitions and restrictions, on-duty treatment, and boundary lines. However, there was no significant correlation between persons involved in cadmium workers. Conclusion: In this study, more active managements such as work ban and restrictions, on-duty treatment among follow-up management of possible occupational disease and probable occupational disease of lead worker and observers are related to a decrease in the ratio of those who have been diagnosed with possible occupational disease and probable occupational disease.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.11a
• /
• pp.115-120
• /
• 1996

Vaccination has been considered to be the most effective way to control infectious diseases. Currently, many vaccines used in humans are live-attenuated or killed microorganisms. Polio, mumps, and measles vaccines are live-attenuated. Killed vaccines include cholera and pertussis vaccines, These conventional vaccines, however, suffer from some problems. In the case of live-attenuated vaccines, reversion to virulence is observed in a small but significant number of clinical cases each year. In killed vaccines, due to the possible hazard to employees working with live pathogens, the cost of preparation is high. Killed vaccines also need to be given in multiple doses, Furthermore, both live-attenuated and killed vaccines have possible presence of cellular materials leading to side effects. Moreover, there are diseases such as malaria and hepatitis for which conventional attenuated and killed vaccines are not available because the pathogens cannot be grown in sufficient amounts to allow the classical methods to be used.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.107-110
• /
• 2011

The key role in safety management is to identify any possible hazard before it occurs by identifying any possible risk factors which are critical to risk assessment. This planning/assessment process is considered to be tedious and requires a lot of attention due to the following reasons: firstly, falsework (temporary structures) in construction projects is fundamentally important. However, the installation and dismantling of those facilities are one of the high risk activities in the job sites. Secondly, temporary facilities are generally not clearly delineated on the building drawings. It is our strong belief that safety tools have to be simple and convenient enough for the jobsite people to manage them easily and be flexible for any occasions to be occurred at various degrees. In order to develop the safety assessment system, this research utilizes the BIM technology and collects important information by importing data from BIM models and use it in the planning stage.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.2 s.9
• /
• pp.111-118
• /
• 2003

Korea High-Speed Railway has various safety systems to secure safe and stable transportation and makes assurance doubly sure to minimize casualty and property damage caused by natural disasters. But, there is no regulation that reflects domestic railway line, climate, topographical and geological characteristic in introducing the foreign regulations yet. Therefore, it is necessary for us to modify a regulation which is suitable to domestic high-speed railway. In this study, it is possible to establish more reasonable boundary rainfall by grasping and improving the troubles with existing boundary rainfall that is scheduled to be utilized for high-speed rail-transport operation control under rainfall. Also, it is possible to insure the safety of train by four steps such as 'normal operation', 'warning issue', 'train speed control' and 'train stop' using the established boundary rainfall. It will go far toward minimizing the occurrence of natural disasters.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.36-41
• /
• 2004

This paper presents an qualitative assessment for hazard on the electric power installations of a construction field using FMEL The power installations have the mission to maintain the highest level of service reliability on the works. The more capital the electric power invest the higher service reliability they plausibly will achieve. However, because of limited resources, how effectively budgets can be allocated to achieve service reliability as high as possible. The assessment typically generates recommendations for increasing component reliability, thus improving the power installation safety. The FMEA tabulates the failure modes of components and how their failure affects the power installations being considered. Tn order to estimate the risks of a failures, the FMEA presents criticality estimation or risk priority number using the severity, occurrence, and detectability. The results showed that the highest components of the risk priority number among components were condenser, transformer, MCCB and LA. And In case of the criticality estimation, the potential failure modes were abnormal temperature rise, insulation oil leakage, deterioration for the transformer, overcurrent for the MCCB and operation outage fir the LA.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.89-94
• /
• 2004

Recently, the cityward tendency of the population has caused the construction of a high rise apartment increased, because it is possible for many people to dwell on a small ground area in an apartment. In the future the number of the constructed high-rise apartment units will also increase, because many people require a better environment and more improved space of their life. However, apartment buildings with many dwellers in spite of small area are exposed to great dangers, particularly fire. So the adaptable control methods of smoke which is the most dangerous to people in a fire were proposed by an analysis on some standards for the fire in this study.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.89-96
• /
• 2007

It is well known that the test and evaluation plan (TEP) is very crucial in the successful development of safety-critical systems. As such, this paper discusses an approach to the development of the TEP for a system that should meet safety requirements in the systems development process. It is studied how to incorporate the result of preliminary hazard analysis (PHA) in generating the safety requirements. It is also discussed how to deal with them when the system requirements (i.e., functions, performance, constraints, components, etc) and the safety requirements are integrated into one model. While doing so, we have constructed the required traceability among them, which is necessary and very useful when the safety requirements need to be corrected or be changed. The use of the traceability makes it possible to easily check out whether and how the safety requirements are properly incorporated in the system design process. Furthermore, without the verified traceability, the system cannot be changed or upgraded later. In order to implement the model on a computer-aided tool, we have constructed a database (DB) schema. As a result, the implemented model/DB allows to automatically generate TEP which can be used to measure the performance and safety level of the developed system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.21-29
• /
• 2004

Floods are disastrous natural phenomena which result in numerous losses of life and property. It is possible to minimize the potential risk by adopting a disaster management system. Nowadays, Geo-Spatial Information System(GSIS) and computer-modelling techniques have assisted scientists and engineers with determining flood disaster assessments, GIS technologies especially have the advantage of performing spatial analysis as well as generating the model for a flood hazard. Therefore, this paper presents the flood management system based on 3D GSIS that can cope with natural disasters actively and manage flood hazard systematically by constructing the database using hydrological data, digital map, DEM, and high-resolution satellite images.