• Speech Sciences
• /
• v.14 no.1
• /
• pp.21-35
• /
• 2007

This paper attempts to investigate phonetic substances of the stress patterns of English compounds and noun phrases, showing that the theoretically derived stress structures are not consistent with the accentual patterns in real utterances. Even though it has been long claimed that compounds have the stress pattern [1 3] and that noun phrases, [2 1] as in Chomsky & Halle (1968), their difference has not been yet explored empirically or phonetically. I present a phonetic experiment conducted to see if there is any difference along the tonal contours, mostly focusing on their pitch accent distribution. 36 different compounds and 36 different noun phrases included in carrier sentences were examined, and they were varied in position within a sentence. Results showed that various accentual patterns were produced, and among them, [H* X] predominantly occurs in all three positions in both compounds and noun phrases, whereas the patterns [X H*] and [X X] appear relatively more frequently in final position than in initial and medial position. Furthermore, the pattern [Ac + No], in which the preceding element is pitch-accented with no accent on the following one, is the major stress pattern in both compounds and noun phrases and in all three sentence positions. This suggests that there seems to be no difference in accentual patterns between compounds and noun phrases, which is not consistent with the hypothesis. The results are interpreted as saying that the preceding element alone tends to be prominent with no accent following it both in compounds and noun phrases, and that therefore, theoretically speculated phonological claims are not always phonetically supported.

• Phonetics and Speech Sciences
• /
• v.3 no.4
• /
• pp.71-81
• /
• 2011

This paper investigated how prosodic position and word type affect the phonetic structure of Korean coronal stops. Initial segments of prosodic domains were known to be more strongly articulated and longer relative to prosodic domain-medial segments. However, there are few studies examining whether the properties of prosodic domain-initial segments are affected by the information content of words (real vs. nonsense words). In addition, since the scope of domain-initial effect was known to be local to the initial consonant and the effects on the following vowel have been found to be limited, it is thus worth examining whether the prosodic domain-initial effect extends into the vowel after the initial consonant in a systematic way across different prosodic domains. The acoustic properties of Korean coronal stops (lenis /t/, aspirated /$t^h$/, and tense /t'/) were compared across Intonational Phrase, Phonological Phrase and Word-initial positions both in real and nonsense words. The durational intervals such as VOT and CV duration were cumulatively lengthened for /t/ and /$t^h$/ in the higher prosodic domain-initial positions. However, tense stop /t'/ did not show any variation as a function of prosodic position and word type. The domain-initial lenis stop showed significantly longer duration in nonsense words than in real words. But the prosodic domain-initial effect was not found in the properties of F0 and [H1-H2] of the vowel after initial stops. The present study provided evidence that speakers tend to enhance speech clarity when there is less contextual information as in prosodic domain-initial position and in nonsense words.

• Journal of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.47-57
• /
• 2001

In this paper we have reconstructed an armillary sphere based on the Method of an Armillary Sphere Making described in the Volume 1 of The Collection of Writings on the Scientific Instruments-Uigijipsol (儀器輯說, two volumes) edited in the 1850's by Nam Byong-Chul (南秉哲, 1817-1863) who was a famous Korean states-man-scientist. Nam achieved convenience and accuracy in the measurements of stellar positions in the manner of selective setting the equatorial, ecliptic and horizontal poles by adding a pole axis exchange ring called Jaigeukkwon (載極圈) between the Three Arrangers of Time and Four Displacements. We made use of 3-dimensional graphic software for modelling Nam's armillary sphere which consisted of five layers-eight rings. Results of simulation showed that the pole axis exchange ring functioned properly in setting the equatorial, ecliptic and horizontal coordinates simply by exchange of positions of specified holes on the ring. We ascertained that the invention of Jaigeukkwon solved inherent problems in the conventional Chinese armillary sphere in computation of real ecliptic coordinates. It was revealed that Nam Byong-Chul made great contributions in the East Asian history of armillary sphere making.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.35.2-35.2
• /
• 2015

We present the results of simultaneous observations of the H2O and SiO masers emitted from the circumstellar envelopes (CSEs) of the late-type stars. These observations have been carried out at the four frequency bands (K, Q, W and D bands) using KVN to apply the source frequency phase referencing (SFPR) analysis to the maser lines. We obtain the relative positions between the H2O and the SiO maser spots by using the SFPR method, which are very important to study the physical links between the inner and the outer parts of the CSEs of the late-type stars. The relative positions between the SiO maser spots of the different transitions are also obtained very accurately, which are very crucial to investigate the pumping mechanism of the SiO maser lines. From our results, the capability of the simultaneous multi-band observation of KVN is proved to be powerful to study the complicated physical environments of the CSEs and the stellar evolution of the late-type stars.

• Physical Therapy Korea
• /
• v.6 no.2
• /
• pp.43-55
• /
• 1999

In today's society, many women wear high-heeled shoes, but the effect of heel height on lumbar lordosis has not been clearly defined. The objective of this study was to identify the influence of heel height and general characteristics of subjects on lumbar lordosis. The subjects of this study were 40 healthy women who were students of the Department of Physical Therapy, College of Rehabilitation Science, Taegu University. Flexible ruler measurement was used to measure the lumbar lordosis at barefoot, 3 cm and 7 cm high-heeled standing positions. The results were as follows: 1) Significant statistical decrease in lumbar lordosis was observed as heel heights were increased from barefoot to 7 cm high heel. 2) There were no statistically significant differences between lumbar lordosis according to three different heel heights and weight, body mass index. 3) Lumbar lordosis measured at different heel heights was related to subject's height. With increasing subject's height, lumbar lordosis that measured from each heel height was significantly decreased. As heel heights were increased from barefoot to 7 cm high heel, significant statistical decrease in lumbar lordosis was observed in the subjects whose height were 151~160 cm. 4) Intrarater reliability on lumbar lordosis taken with a flexible ruler was good, with Cronbach ${\alpha}$ values of 0.8971 for barefoot, 0.8107 for 3 cm and 0.9002 for 7 cm high-heeled standing positions.

• BMB Reports
• /
• v.44 no.10
• /
• pp.674-679
• /
• 2011

Bacillus sphaericus produces mosquito-larvicidal binary toxin composed of BinA and BinB. While BinB is expected to bind to a specific receptor on the cell membrane, BinA interacts to BinB or BinB receptor complex and translocates into the cytosol to exert its activity via unknown mechanism. To investigate functional roles of aromatic cluster in BinA, amino acids at positions Y213, Y214, Y215, W222 and W226 were substituted by leucine. All mutant proteins were highly produced and their secondary structures were not affected by these substitutions. All mutants are able to insert into lipid monolayers as observed by Langmuir-Blodgett trough and could permeabilize the liposomes in a similar manner as the wild type. However, mosquito-larvicidal activity was abolished for W222L and W226L mutants suggesting that tryptophan residues at both positions play an important role in the toxicity of BinA, possibly involved in the cytopathological process after toxin entry into the cells.

• BMB Reports
• /
• v.45 no.8
• /
• pp.452-457
• /
• 2012

Diketoreductase (DKR) from Acinetobacter baylyi contains two tryptophan residues at positions 149 and 222. Trp-149 and Trp-222 are located along the entry path of substrate into active site and at the dimer interface of DKR, respectively. Single and double substitutions of these positions were generated to probe the roles of tryptophan residues. After replacing Trp with Ala and Phe, biochemical and biophysical characteristics of the mutants were thoroughly investigated. Enzyme activity and substrate binding affinity of W149A and W149F were remarkably decreased, suggesting that Trp-149 regulates the position of substrate at the binding site. Meanwhile, enzyme activity of W222F was increased by 1.7-fold while W222A was completely inactive. In addition to lower thermostability of Trp-222 mutants, molecular modeling of the mutants revealed that Trp-222 is vital to protein folding and dimerization of the enzyme.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.8
• /
• pp.1073-1082
• /
• 1998

When thermal diffusivity is measured by laser flash method, the thermal diffusivity call be calculated front the assumption of the uniformly heated whole surface of the specimen. It has been known that the approximate 5% error is made by the non-uniform energy distribution on the specimen surface of laser pulse heat source. In this study, to obtain the highly-uniformed laser beam, which has both the low non-uniform heating error from non-uniform laser beam and the energy loss, research was carried out on no transmitting loss by optical fiber and high repetitions. In addition, heating error and thermal diffusivity were measured as the measuring positions were varied and compared with the results using the uniform and the non-uniform laser beams. In addition, dole to using the uniformalized laser beam, the whole surface of the specimen was heated uniformly and as a result, it was the thought that this was very effective to reduce the variations of the errors of the thermal diffusivity as the measuring positions were varied. It can be obtained that when the thermal diffusivity of POCO-AXM-5Q1 of SRM in NBS was measured with both the uniform and the non-uniform laser beams, the dispersion error of the former was from 2 to 2.5%, which was more improved than that of the latter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.2
• /
• pp.347-365
• /
• 2013

The performance of finger-vein recognition methods is limited by camera optical defocusing, the light-scattering effect of skin, and individual variations in the skin depth, density, and thickness of vascular patterns. Consequently, all of these factors may affect the image quality, but few studies have conducted quality assessments of finger-vein images. Therefore, we developed a new finger-vein recognition method based on image quality assessment. This research is novel compared with previous methods in four respects. First, the vertical cross-sectional profiles are extracted to detect the approximate positions of vein regions in a given finger-vein image. Second, the accurate positions of the vein regions are detected by checking the depth of the vein's profile using various depth thresholds. Third, the quality of the finger-vein image is measured by using the number of detected vein points in relation to the depth thresholds, which allows individual variations of vein density to be considered for quality assessment. Fourth, by assessing the quality of input finger-vein images, inferior-quality images are not used for recognition, thereby enhancing the accuracy of finger-vein recognition. Experiments confirmed that the performance of finger-vein recognition systems that incorporated the proposed quality assessment method was superior to that of previous methods.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.2
• /
• pp.250-259
• /
• 2012

The need for position information in indoor environments has been growing lately. Several indoor navigation systems have been studied. Among them, pseudolite-based indoor positioning systems are one of the best systems to obtain precise position measurements. However, the installation of such systems is very difficult because the calibration of pseudolite antenna position is complicated. For precise calibration, the use of carrier phase measurements is necessary, and whenever carrier phase measurements are considered, problems with cycle ambiguity appear. In this paper, a new approach to calibrate the positions of pseudolite antennas is proposed. By using a multi-antenna, the ambiguity can be eliminated, epoch by epoch, for every single carrier phase measurement. Moreover, the number of calibration points can be reduced down to 3 by use of measurements collected at unknown positions. Using the proposed methods, the process of the collection of carrier phase measurements becomes considerably simple and convenient. Simulation results are presented to verify the proposed algorithms.